Has anyone flashed their Nano with the Fury X bios? I really like the Nano, but it seems that the voltage jumps around a lot compared to the Fury X. I've been messing around with both for the past few days and have seen that the Fury X maintains a stable clock speed with small variations during normal use, ie internet, docs, ... Compare to the Nano though, it seems that the core clock is constantly changing, as well as the voltage. So I was curious to see how the Nano performed with the Fury X bios and everything worked well. Booted, fans speed works, GPU-Z recognizes it as a Fury X. However, when using Unigine I found the FPS were near half of what I was getting with the Nano bios, but visually it did not feel like the FPS reporting was accurate. I also noticed the clock speed at idle was stable just like the Fury X. I did try overclocking the card and found that I was able to reach core clocks that I otherwise would not be able to. 1200 Core and 550 Mem with +24Mv was the most I was able to try and stayed under 60c in firestrike. I switched back to the Nano bios after a driver reset and boot failure. So i am curious if anyone has played with this?