Overclock.net › Forums › Cooling › Water Cooling › PETG and fittings recommendations
New Posts  All Forums:Forum Nav:

PETG and fittings recommendations

post #1 of 2
Thread Starter 
So I was originally going to go with Monsoon tubes/fittings for everything, and I then I started reading about the cracking, brittle ends, etc. So PETG seems to be the new flavor of the month (and for what looks like very reasons).

I've looked at the Primochill PETG, and that looks pretty good. So is that the current best product out there from a PETG perspective? How about fittings?

I'm looking to purchase in the next 14 days.

- ZJ
post #2 of 2
Primochill PETG are 13mm/10mm aka 1/2'' OD, so 12mm OD fittings from BP, EK won't work.
I got my PETG tubing from McMaster Curr at much much lower price than Primochill. But most of them came scratched, the customer service answered it was due to the way they store it, so there's nothing they can do.

PETG is really just easier to work with.

Hope this helps..
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › PETG and fittings recommendations