Originally Posted by tysonischarles
Originally Posted by Jeffinslaw
Well the 970's I bought from the marketplace are going back to Canada because the guy I purchased them from didn't write down the correct address so USPS didn't deliver the package. Awesome
Oh wow, that would have made me flip it so bad :/
I'm just very nervous hoping the seller does the right thing and ship them back out and that it was just an honest mistake. But, in others news, I'd like to thank my new sponsor, SilverStone! They have graciously provided me with a SX600-G power supply! Will have pictures of that tomorrow. Banner has been updated
enjoy the pictures of all the lovely EK pr0n!
Update 3 - EK Sponsorship Parts
Heads up, the color correction is all over the place. Something I need to work with!
Some nice black compression fittings! Sizes 3/8in x 5/8in.
90° fittings as well as four EK HDC fittings with two, two slot tubes.
A sexy EK Supremacy EVO in acetal and copper.
RAM blocks in acetal and copper. The RAM blocks will be for fancy tube routing
Lots o' blocks!
Stripping them down slowly... parents, this next part many not be suitable for small children.
Ooh so sexy!
Needed a pump as well! Went with a nice DDC w/ reservoir combo.
Two radiators! Of the SE version. You would get away with push/pull on the SE in this case, just barely though. You'd be at 76mm of total thickness. Might fit.
This picture is really cool. Those radiators really are thin!
And last but not least! Some Vardar F4's! Four of them for push.
Black wire, I like!
Black sleeving, I also like!
Hmm looks like I forgot to snap some pictures of the coolant. Well, it is EK Pastel Mint Green. Should look pretty nice in there with the hints of green sleeving and once all the red has been covered up.
Hope you enjoyed! Look for pictures of the power supply tomorrow and pictures of parts IN the case! Oh yes, I have the fans, radiators, and pump installed.
-JeffinslawEdited by Jeffinslaw - 12/13/15 at 3:04pm