Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Case Mods › Case Mod Work Logs › Snow Camo Mode - NZXT Phantom ATX Full Tower
New Posts  All Forums:Forum Nav:

Snow Camo Mode - NZXT Phantom ATX Full Tower

post #1 of 4
Thread Starter 
Hi everyone!

Since I build this PC 4 years ago, I didn't gave any s**** about to maximize the build itself as long as I could play any game I wanted.
(including CPU/GPU temp, FPS, airflow/cooling system and appearance)

By the time I start to write this thread, I've already upgraded the processor, motherboard and memory.
So, I made up my mind to begin the modding process before it's too late.

*Because this case is a bit outdated, not almost accessories are compatible. Unless I mod it as far as I could.

The final specs are as follow:
CPU : Intel i7-4790
CPU COOLER : NZXT Kraken x31
MEMORY : Corsair Dominator Platinum 16GB (2 x 8GB) DDR3-1600
STORAGE : Samsung 850 EVO-Series 500GB
GPU : GALAX GeForce GTX 970 4GB Hall of Fame
CASE : NZXT Phantom (White) ATX Full Tower
CASE FAN : BitFenix Spectre Pro LED 120mm x 1, 140mm x 1
LED : Bitfenix Alchemy LED Strip
CABLES EXTENSION : Bitfenix Alchemy 24-pin ATX Extension, 8-pin PCI-E Extension x 2, SATA 3 Extension

PERIPHERALS : Razer Leviathan 5.1 Surround Soundbar, Razer Blackwidow Ultimate 2012 Edition

Before mod :

Here is the final product:

Edited by j4lu7 - 9/16/15 at 10:07pm
post #2 of 4
Thread Starter 
act, during the last post, i've already bought the new gpu.
Here, I present to all of you....

gonna using this to solve the cable problem wink.gif
post #3 of 4
Thread Starter 

I'm gonna need this too

first, remove the old led strip,

because asus sabertooth board too big, and I couldn't mount this led strip i/o panel on phantom.

Start from 24-pin extension. Act, I prefer white colour but it was out of stock frown.gif

look's nice

Supposedly, I remove the gpu first to dismantle sata cable from the board. Wrong step doh.gif Now, I should consider to design PSU shroud.

So, remove the HDD bracket. Is anyone using 7 HDD/SSD on phantom? hahah no need right

So, begin with taking measurement. Should lil bit bigger than psu dimension. but why? blinksmiley.gif

I'm using acrylic 2mm. Is it thick enough?thinking.gif

Using fast glue to attach between each acrylic.

No problem, I think

Wait to be painted. gunner2.gif
post #4 of 4
Thread Starter 
So, last two days I took half-day work because nothing really to do in office tongue.gif
And proceed with modding the psu shroud prototype.
Using white and grey colour to create snow camo effect

half-way done

Aaand painting done!

Next, I mounted the holder which I found in hardware shop. It is easier to install and remove the shroud for future maintenance.

Put some magic strap, so can easily fix the pci-e 8 pin cable connecting to gpu

Fix the shroud, along with the cable

Still messy back there. Guess need to change modular psu in future stitchfacesmiley.png

Aaaaaand it's done!!

So, next I will modding the side panel. But need to take a break for few days biggrin.gif
See ya!
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Case Mod Work Logs
Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Case Mods › Case Mod Work Logs › Snow Camo Mode - NZXT Phantom ATX Full Tower