Nvidia GTX 980 Ti Owners Club
If you are looking for comparative info on the different models of 980 Ti's check out shilka's thread below.
http://www.overclock.net/t/1566669/nvidia-gtx-980-ti-comparison-thread/0_100
This is a club for Owners for the 980 Ti.
Fill out the form to set yourself apart from those that don't own this amazing card.
And we will ask that moderators remove all troll post.
[URL=http://www.overclock.net/t/1558645/the-nvidia-gtx-980-ti-owners-club/] [NVIDIA GTX 980 Ti Owner's Club][/URL]
GTX 980 Ti Specs (Click to show)

- TechPowerUp
- Anandtech
- HardwareCanucks
- OC3D
- Bit-Tech
- TechReport
- PCPer
- Zol
- HWBattle
- Guru3d
- KitGuru
- Tom's Hardware
- MaximumPC
- TechSpot
- TweakTown
- EuroGamer
- ArsTechnica
- PCGamer
- HardwareZone
- Hardware.fr
Video reviews:
2. Get the BIOS (.rom). Save to the same dir.
3. cmd window: Start, Run, cmd, right-click, Run as Administrator, go to the nvflash folder. Shows cards in system with ID nvflash --list
4. Device Manager: Start, run, device manager in Display adapters. right click/Disable all cards
5. cmd window: To flash: nvflash -6 GM200.rom Where GM200 is whatever BIOS you're using. Index option to specify which card to flash, ie. nvflash -6 --index=0 GM200.rom You will have to confirm 'y' a few times.
6. Device Manager: in Display adapters. right click/Enable all cards
7. Reboot, let the card get set up, reboot again.
Quote:

Here is a modded BIOS with 425W power target:
- Based on the EVGA SC BIOS, no boost limit
- 350W default power target at 100%
- 425W max power target at 121%
Use this BIOS if you want to avoid throttling. For flashing instructions see Page 1 of the Titan-X owner's club.
Be sure to use the nvflash utility posted there as well.
Last but not least: DO THIS AT YOUR OWN RISK.
980Ti-SC-425.zip 152k .zip file

Here is a modded BIOS with 425W power target AND 1.281v when under load:
- Based on the EVGA SC BIOS, no boost limit
- 350W default power target at 100%
- 425W max power target at 121%
- 1.281v under load
THIS BIOS IS INTENDED FOR WATERCOOLING/BENCHING USE. Not recommended if you're on the stock air cooler.
Use PX or AB to dial in your +core and power target percentage. There is no need to adjust the voltage.
For flashing instructions see Page 1 of the Titan-X owner's club. thumb.gif
Be sure to use the nvflash utility posted there as well.
Last but not least: DO THIS AT YOUR OWN RISK.
980Ti-SC-425-1281mv.zip 152k .zip file

980 Ti MAXAIR BIOS for reference cards
This BIOS is intended for those who want to max out their OC on the stock cooler.
- Based on EVGA 980 Ti SC reference BIOS
- 1.250v at load
- 425W at 121% - 350W at 100%
To use this simply set +core, +mem, and power target in PX or AB. No need to touch voltage; the BIOS will provide 1.250v at load.
980Ti-SC-MaxAir.zip 152k .zip file
As always, flash at your own risk.

Just wanted to post my last and final bios after doing a lot of work to fix the bugs reported with my previous bios. So here we go.
Power Target: 375W
Voltage: 1.23v @ load. voltage slider in afterburner/Precision X does not do anything at all
Stock Boost Clock: 1291mhz (will not boost to 1493mhz like my earlier bios)
Have tested for the past 6 hours to make sure completely stable. please give it a try and share results. Thanks!
motivmanbiosfinal1230.zip 152k .zip file
I will really appreciate if OP will paste this to the front page and replace my previous bios. Thanks Again.
Edited by Rickles - 7/26/15 at 3:29pm













