Originally Posted by PedroC1999
Very high, that's more of a custom OC BIOS sort of voltage, most cards stock are under 1.22v and under 1.12
Originally Posted by dmasteR
Your voltage seems quite high for stock.
Idk what fixed it. Restarted a few times and reflashed bios. Back to running at .848V idle GPU V
. All good now.
Originally Posted by SWood
Hoping you guys can help me figure this out: I have an Asus GTX 980 Ti Strix and I've been playing around with MBT trying to create a custom BIOS for it. ASIC quality is 75% and the Strix has a pretty beefy 14 phase VRM, so I figure with the right BIOS it should be good for a pretty decent OC. I extracted a copy of the stock BIOS using GPU-Z and modified it using the MaxAir BIOS as a template for the power table and voltage table. Problem is I can't seem to push the voltage past 1.212V even when it's set to 1.25V in the BIOS. When I turn overvoltage off in PX, GPU voltage maxes out at 1.870V, and when I turn overvoltage on and push it to +50mV the best I can get is 1.212V (assuming PX is reporting the voltage correctly, but GPU-Z is giving me VRel for the perfcap reason so it sounds like I'm starved for volts and that's what's holding me back, yeah?). I can give it +50 on the core at 1.212V, which gives a 1444MHz boost clock in Heaven but anything beyond that crashes within a few minutes. This may have already been answered and I apologize if so (I searched the thread but didn't see anything that jumped out at me), but any ideas on why I can't seem to break past 1.212V even though the BIOS is set for 1.25V?
Have the same card. If in maxwell tweaker you are on asus version AS10 or above, we have no luck in unlocking voltages unless soldering the LN2 points. ASUS done ****ed us with their "high end cards". If you are in the return window, get an EVGA classified or the Galax card.