Overclock.net › Forums › Graphics Cards › NVIDIA › [Official] Nvidia GTX 980 Ti Owners Club
New Posts  All Forums:Forum Nav:

[Official] Nvidia GTX 980 Ti Owners Club - Page 1341

post #13401 of 16227
Quote:
Originally Posted by thebaltar View Post

Hi guys,

I bought a EVGA 980ti 06G-P4-4991, and my max OC are around 1430Mhz at 1.240mv.
I tried to edit my own bios to increase the voltage at 1.2560mv or 1.2650mv, but i dont had sucess, the max voltage seems to be 1.240mv.

some ideas to unlock this voltage?
If i flash those bios of the first page, is safe?

thanks!

Quote:
Originally Posted by thebaltar View Post

Min and max voltage?

give this a read when you have time: (need translate unless you read german)

http://www.computerbase.de/forum/showthread.php?t=1445972

pay attention to:


Unlock volt regulator --- Only for 980 Ti / Titanium X users needed

and then

Voltage Table (980 Ti, Titanium X) --- max. Set volts, and throttle limits


Setting Voltage Table (980 Ti, Titanium X) --- Volt regulated (Beta)


Voltage Table --- Boost levels and adjust related Volt


it will be a little over whelming but you'll get it.


be safe, have fun. thumb.gif
loon 3.2
(18 items)
 
  
CPUMotherboardGraphicsRAM
i7-3770K Asus P8Z77-V Pro EVGA 980TI SC+ 16Gb PNY ddr3 1866 
Hard DriveHard DriveHard DriveOptical Drive
PNY 1311 240Gb 1 TB Seagate 3 TB WD Blue DVD DVDRW+/- 
CoolingCoolingOSMonitor
EKWB P280 kit EK-VGA supremacy Win X LG 24MC57HQ-P 
KeyboardPowerCaseMouse
Ducky Zero [blues] EVGA SuperNova 750 G2 Stryker M [hammered and drilled] corsair M65 
AudioAudio
SB Recon3D Klipsch ProMedia 2.1  
  hide details  
Reply
loon 3.2
(18 items)
 
  
CPUMotherboardGraphicsRAM
i7-3770K Asus P8Z77-V Pro EVGA 980TI SC+ 16Gb PNY ddr3 1866 
Hard DriveHard DriveHard DriveOptical Drive
PNY 1311 240Gb 1 TB Seagate 3 TB WD Blue DVD DVDRW+/- 
CoolingCoolingOSMonitor
EKWB P280 kit EK-VGA supremacy Win X LG 24MC57HQ-P 
KeyboardPowerCaseMouse
Ducky Zero [blues] EVGA SuperNova 750 G2 Stryker M [hammered and drilled] corsair M65 
AudioAudio
SB Recon3D Klipsch ProMedia 2.1  
  hide details  
Reply
post #13402 of 16227
Quote:
Originally Posted by thebaltar View Post

Min and max voltage?

Yeah, if you want it to run like, 1.256v load, adjust both min and max to 1.256v.
Those clock bins correspond with your boost table. You can check in the boost table above which clock bin you want your voltage to be applied.

I always make my BIOS's with 1278.5Mhz Boost as max boost table. This makes the 52 (if i recall correctly) bin 1000.0Mhz. So, I leave all voltages below the 52 bin stock, then put all voltages above the 52 bin on 1.256v-1.256v.

This gives perfectly stable 3d load volts and leaves low volt idle / low load intact.

Also gives you 1278.5mhz stock clocks (when volts in MSI AB or whatever is on +0.87v otherwise Boost will limit clocks) which givesyou a stable baseline clock to clock offset from.
Thundahcat.
(17 items)
 
   
CPUMotherboardGraphicsRAM
AMD Athlon XP-M Barton @ 2612Mhz ASUS A7N8X-X HIS Radeon X800XL 256MB w/ V-MOD @ 585Mhz GPU 5... 3x512MB Samsung PC-3200 CL3 
Hard DriveCoolingOSOS
Maxtor 80GB IDE Cooler Master alu/copper block with a Slipstrea... Windows 98 SE Windows XP Pro SP3 
PowerCase
Cooler Master Real Power M520W OEM with great airflow and even cable management 
  hide details  
Reply
Thundahcat.
(17 items)
 
   
CPUMotherboardGraphicsRAM
AMD Athlon XP-M Barton @ 2612Mhz ASUS A7N8X-X HIS Radeon X800XL 256MB w/ V-MOD @ 585Mhz GPU 5... 3x512MB Samsung PC-3200 CL3 
Hard DriveCoolingOSOS
Maxtor 80GB IDE Cooler Master alu/copper block with a Slipstrea... Windows 98 SE Windows XP Pro SP3 
PowerCase
Cooler Master Real Power M520W OEM with great airflow and even cable management 
  hide details  
Reply
post #13403 of 16227
Quote:
Originally Posted by looniam View Post


give this a read when you have time: (need translate unless you read german)

http://www.computerbase.de/forum/showthread.php?t=1445972

pay attention to:


Unlock volt regulator --- Only for 980 Ti / Titanium X users needed

and then

Voltage Table (980 Ti, Titanium X) --- max. Set volts, and throttle limits


Setting Voltage Table (980 Ti, Titanium X) --- Volt regulated (Beta)


Voltage Table --- Boost levels and adjust related Volt


it will be a little over whelming but you'll get it.


be safe, have fun. thumb.gif

I tried over volting and the gains I've gotten weren't worth it for the temp cost. I've settled on 1400mhz at stock 1.193v, but I feel I can run it at lower volts.
I want to try my hand at undervolting. Does it work the same way as stated above?

Edit: Figured it out with the linked site, thanks. Trying 1405mhz at 1.174 atm.
Edited by wizardbro - 6/14/16 at 6:46am
post #13404 of 16227
Quote:
Originally Posted by Hionmaiden View Post

Bios won't allow more voltage, you need a tool to do it and I'm waiting on it from the HoF thread. but thanks thumb.gif

The file i zipped is the hof voltage tool for 980ti.
Main System
(11 items)
 
Bench System
(38 items)
 
 
CPUMotherboardGraphicsRAM
i7 5820k Gigabyte x99 SOC-Champion GTX 970 SSC HyperX Savage DDR4 2400 4x8GB 
Hard DriveHard DriveHard DriveCooling
Samsung 950 Pro 512GB M.2 Samsung 850 evo 500GB  WD Black 2TB Be Quiet! Dark Rock Pro 3 
OSPowerCase
Windows 10 pro 64bit EVGA SuperNOVA 1300 G2 Phanteks Enthoo evolv ATX 
CPUCPUCPUCPU
i7 6700k i3 6320 5960x Q6600 
CPUMotherboardGraphicsGraphics
A6-5400k Asrock z170M OCF XFX 8600GTS Radeon HD5850 
GraphicsGraphicsGraphicsGraphics
PNY 9500GT EVGA GTX970 SSC ACX2+ EVGA GTX980TI Classified EVGA GTX980TI Classified 
RAMRAMRAMRAM
4x4GB G.Skill Ripjaws 4 2400 DDR4 15-15-15-35-2... 2x8GB G.skill Ripkaws V 3200 DDR4 16-18-18-38-2... 2x4GB G.Skill Trident Z 4000 DDR4 19-21-21-41-2... 2x8GB G.skill Trident Z DDR4 3200 14-14-14-34-2... 
RAMRAMRAMHard Drive
2x2GB G.skill DDR2 1066 2x2GB G.skill Pi DDR2 1100 2x4GB Klevv Urbane DDR3 2800  Kingston 300v 
Hard DriveHard DriveHard DriveHard Drive
Kingston 300v OCZ ARC100 Silicon power flashdrive  Silicon power flashdrive 
CoolingCoolingOSOS
EK Predator 360 AIO EK Predator 240 AIO windows 7 Pro 64-bit SP1 windows 10 32-bit 
OSOSPowerOther
windows 10 Pro 64-bit windows 8.1 32-bit EVGA 1300 G2 EVBOT 
OtherOtherOtherOther
Klein Tools MM600 Klein Tools MM600 Gigabyte x99 SOC Champion  Asus Maximus Formula (Specail Edition) 
OtherOther
Asrock Extreme 6+ A88X XFX Pro series 1050W  
  hide details  
Reply
Main System
(11 items)
 
Bench System
(38 items)
 
 
CPUMotherboardGraphicsRAM
i7 5820k Gigabyte x99 SOC-Champion GTX 970 SSC HyperX Savage DDR4 2400 4x8GB 
Hard DriveHard DriveHard DriveCooling
Samsung 950 Pro 512GB M.2 Samsung 850 evo 500GB  WD Black 2TB Be Quiet! Dark Rock Pro 3 
OSPowerCase
Windows 10 pro 64bit EVGA SuperNOVA 1300 G2 Phanteks Enthoo evolv ATX 
CPUCPUCPUCPU
i7 6700k i3 6320 5960x Q6600 
CPUMotherboardGraphicsGraphics
A6-5400k Asrock z170M OCF XFX 8600GTS Radeon HD5850 
GraphicsGraphicsGraphicsGraphics
PNY 9500GT EVGA GTX970 SSC ACX2+ EVGA GTX980TI Classified EVGA GTX980TI Classified 
RAMRAMRAMRAM
4x4GB G.Skill Ripjaws 4 2400 DDR4 15-15-15-35-2... 2x8GB G.skill Ripkaws V 3200 DDR4 16-18-18-38-2... 2x4GB G.Skill Trident Z 4000 DDR4 19-21-21-41-2... 2x8GB G.skill Trident Z DDR4 3200 14-14-14-34-2... 
RAMRAMRAMHard Drive
2x2GB G.skill DDR2 1066 2x2GB G.skill Pi DDR2 1100 2x4GB Klevv Urbane DDR3 2800  Kingston 300v 
Hard DriveHard DriveHard DriveHard Drive
Kingston 300v OCZ ARC100 Silicon power flashdrive  Silicon power flashdrive 
CoolingCoolingOSOS
EK Predator 360 AIO EK Predator 240 AIO windows 7 Pro 64-bit SP1 windows 10 32-bit 
OSOSPowerOther
windows 10 Pro 64-bit windows 8.1 32-bit EVGA 1300 G2 EVBOT 
OtherOtherOtherOther
Klein Tools MM600 Klein Tools MM600 Gigabyte x99 SOC Champion  Asus Maximus Formula (Specail Edition) 
OtherOther
Asrock Extreme 6+ A88X XFX Pro series 1050W  
  hide details  
Reply
post #13405 of 16227
I can run 1405mhz at 1.134mv now with a bit of undervolting, 1.1mv crashes.

My card idles at 923mhz@1.024mv because I have two high res screens at diff refresh rates. I can't force force 2d clocks or my screens just go grey, so I'm assuming the card needs to run at this clock to run my displays.

Is there anyway to undervolt this idle state as well? I tried messing with all the relevant states (31-39) in the voltage table, but the idle clock and voltage doesn't budge.
post #13406 of 16227
Bought Gigabyte GTX 980ti G1 Gaming. Awesome card:

post #13407 of 16227
Hello, I haven't been here for a long time. But now that I bought a new rig I need some help with overclocking. I have two 980 ti Asus reference cards in SLI watercooled (XSPC GTX waterblocks). Based from your experienece with this type of cards (I am new to watercooling, I bought the rig already assambled) what overclocking values should I apply to core clock and memory clock, should I play with the voltage? Also what program should I use, asus gpu tweak or msi afterburner? The last time I overclocked a gpu card was 5 years ago with gtx 580 and I used msi afterburner. Thanks in advance for tout help!
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
I7 980x @ 4,27Ghz ASUS Rampage 3 Extreme MSI GTX 580 Lightning 2 way SLI Mushkin 12GB DDR3 1600MHz CL10 
Hard DriveOptical DriveOSMonitor
Kingston 64 GB SSD and WD 1TB SATA-II 7200 RPM 32 DVD-Writer LG GH24NS50R Windows 7 64 Samsung SA550 27" 
KeyboardPowerCaseMouse
Logitech Y-BN52 Corsair CMPSU-1200AX Cooler Master HAFX 942 Logitech G9X 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
I7 980x @ 4,27Ghz ASUS Rampage 3 Extreme MSI GTX 580 Lightning 2 way SLI Mushkin 12GB DDR3 1600MHz CL10 
Hard DriveOptical DriveOSMonitor
Kingston 64 GB SSD and WD 1TB SATA-II 7200 RPM 32 DVD-Writer LG GH24NS50R Windows 7 64 Samsung SA550 27" 
KeyboardPowerCaseMouse
Logitech Y-BN52 Corsair CMPSU-1200AX Cooler Master HAFX 942 Logitech G9X 
  hide details  
Reply
post #13408 of 16227
missed the $399 sale for the msi golden edition at newegg. just a little bummed.
w00t
(18 items)
 
   
CPUMotherboardGraphicsRAM
ph2 x20be asus m4a785-m sapphire vapor-x 4850  geil black dragon 1066 5-5-5-15-20 
Hard DriveOptical DriveCoolingOS
wd  asus dvd multi-write arctic cooling freezer 64 pro win 7 ultimate x64 
MonitorKeyboardPowerCase
samsung 42" lcd logitech wireless antec basic 500watt old dell crap 
MouseAudio
logitech wireless pioneer 7.1 
  hide details  
Reply
w00t
(18 items)
 
   
CPUMotherboardGraphicsRAM
ph2 x20be asus m4a785-m sapphire vapor-x 4850  geil black dragon 1066 5-5-5-15-20 
Hard DriveOptical DriveCoolingOS
wd  asus dvd multi-write arctic cooling freezer 64 pro win 7 ultimate x64 
MonitorKeyboardPowerCase
samsung 42" lcd logitech wireless antec basic 500watt old dell crap 
MouseAudio
logitech wireless pioneer 7.1 
  hide details  
Reply
post #13409 of 16227
2nd Classy arrived today. Ran some baselines on air before I put it under water. This one does a bit better than the first with stock volts and stock bios.

1st card: 1524 / 2050
2nd card: 1542 / 2075

I'll put the blocks on tomorrow and see how far I can push them.
post #13410 of 16227
Don't be mad if they tap out not far from those clocks. biggrin.gif
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: NVIDIA
Overclock.net › Forums › Graphics Cards › NVIDIA › [Official] Nvidia GTX 980 Ti Owners Club