Overclock.net › Forums › Graphics Cards › AMD/ATI › Hawaii Bios Editing ( 290 / 290X / 295X2 / 390 / 390X )
New Posts  All Forums:Forum Nav:

Hawaii Bios Editing ( 290 / 290X / 295X2 / 390 / 390X ) - Page 169

post #1681 of 3620
here are my new results 1175/1750 +125 core nominal aux. FF F1 with 1125 timings up to 1750. its been a while since i did this benching like i did before so its not TOTALLY optimal but its decent.

EDIT: anything neat i should try with my bios?
post #1682 of 3620
Thread Starter 
Have you done RAM timings tighter?

When your card is using stock ROM what do you get as voltages for DPM 0 -7?
The Stilt Machine
(14 items)
 
XPS - i5 4690K
(12 items)
 
XPS - Q6600
(8 items)
 
CPUMotherboardGraphicsRAM
Ryzen 7 1700 Asus Crosshair VI Hero Sapphire Fury X@1145/545 G.Skill Trident Z 2x 8GB 3200MHz C14 
Hard DriveCoolingCoolingCooling
Samsung Evo 840 ThermalRight Archon IB-E X2 + 2x TY143 ThermalRight TY-143 2x front case intake Arctic Cooling F12 + 2x F9 as rear case exhaust 
OSMonitorKeyboardPower
Win 7 Pro x64 / Win 10 Pro x64 Asus MG279Q Cherry MX-Board 3.0 Cooler Master V850 
CaseMouse
SilverStone TJ06 Logitech G700S 
CPUMotherboardGraphicsRAM
i5 4690K@4.9GHz 1.255V Asus Maximus VII Ranger Sapphire Fury X@1145/545 HyperX Savage 2x8GB 2400MHz C11 
Hard DriveCoolingOSMonitor
Samsung Evo 840 TR Archon SB-E X2 Win 7 Pro x64 / Win 10 x64 Asus MG279Q 
KeyboardPowerCaseMouse
Cherry MX-Board 3.0 Cooler Master V850 SilverStone TJ06 Logitech G700S 
CPUMotherboardGraphicsRAM
Intel Q6600 G0 Asus P5K Premium Black Pearl Sapphire Toxic HD5850 Corsair Dominator 4GB 
Hard DriveCoolingOSPower
Crucial MX 100 256GB TR TRUE Rev.A Win 7 Pro x64 Cooler Master V650 
  hide details  
Reply
The Stilt Machine
(14 items)
 
XPS - i5 4690K
(12 items)
 
XPS - Q6600
(8 items)
 
CPUMotherboardGraphicsRAM
Ryzen 7 1700 Asus Crosshair VI Hero Sapphire Fury X@1145/545 G.Skill Trident Z 2x 8GB 3200MHz C14 
Hard DriveCoolingCoolingCooling
Samsung Evo 840 ThermalRight Archon IB-E X2 + 2x TY143 ThermalRight TY-143 2x front case intake Arctic Cooling F12 + 2x F9 as rear case exhaust 
OSMonitorKeyboardPower
Win 7 Pro x64 / Win 10 Pro x64 Asus MG279Q Cherry MX-Board 3.0 Cooler Master V850 
CaseMouse
SilverStone TJ06 Logitech G700S 
CPUMotherboardGraphicsRAM
i5 4690K@4.9GHz 1.255V Asus Maximus VII Ranger Sapphire Fury X@1145/545 HyperX Savage 2x8GB 2400MHz C11 
Hard DriveCoolingOSMonitor
Samsung Evo 840 TR Archon SB-E X2 Win 7 Pro x64 / Win 10 x64 Asus MG279Q 
KeyboardPowerCaseMouse
Cherry MX-Board 3.0 Cooler Master V850 SilverStone TJ06 Logitech G700S 
CPUMotherboardGraphicsRAM
Intel Q6600 G0 Asus P5K Premium Black Pearl Sapphire Toxic HD5850 Corsair Dominator 4GB 
Hard DriveCoolingOSPower
Crucial MX 100 256GB TR TRUE Rev.A Win 7 Pro x64 Cooler Master V650 
  hide details  
Reply
post #1683 of 3620
Quote:
Originally Posted by gupsterg View Post

@kizwan

I only checked VRAM_Info of the XFX 390 DD ROM you use as base, it has:-

EMRS3Value = 0x6100 (24832)

AJR VRAM_Info I use is:-

EMRS3Value = 0x6123 (24867)

Everything else is same.

Next the 1150/1500 results you had asked about (only did 1 run each).



Link:- 3dMark results.

In link 5th place result is V6V34MEM and 4th place was same ROM but EMRS3Value 0061.

I don't think EMRS3Value is boosting your 390 ROM to lead by ~120 points vs 290 ROM tests you did.

I needed ~1.325v VID to have 1150 / 1500 stable, comparing it to 1100 ~1.30v VID not to bad IMO (4.5% clock gain for + 2% VID), did not check VDDC.
I did few more runs of Firestrike with Catalyst 15.7.1 & Crimson 16.1 drivers @1150/1500.
http://www.3dmark.com/compare/fs/7447407/fs/7447440/fs/7447544/fs/7447597/fs/7447838/fs/7447870/fs/7447895
Superhero Effect
(26 items)
 
   
CPUMotherboardGraphicsRAM
Intel Core i7-3820 @4.7GHz Asus P9X79 PRO 2 x Sapphire R9 290 4GB GDDR5 Corsair Vengeance CMZ16GX3M4X1600C9 (16GB) 
Hard DriveHard DriveOptical DriveCooling
WD WD6400AAVS 640GB 8MB SATA-II Caviar Green 2 x Plextor PX-M5S 128GB (RAID0) Liteon 12x Blu-ray Drive COMBO 2 x (EK-FC R9-290X - Acetal, EK-FC R9-290X Back... 
CoolingCoolingCoolingCooling
Koolance Ball Valve VLV-BL1X2 XSPC D5 Dual Bay Reservoir/Pump Combo Hardware Labs Black Ice GT Stealth 360mm Hardware Labs Black Ice SR-1 120 
CoolingCoolingCoolingCooling
XSPC EX240 2x120mm radiator 5 x Corsair SP120 High Performance 2 x Corsair SP120 PWM High Performance XSPC Raystorm 
CoolingCoolingOSMonitor
NZXT Sentry 2 fan controller PrimoFlex Advanced LRT 10ft Tubing - 7/16in. ID... Windows 10 Home 64-bit Samsung SyncMaster B2330H 23" 
MonitorKeyboardPowerCase
Philips 236G3DHSB 3D LCD LED 23" Razer BlackWidow Ultimate Seasonic X-1050 1050W Corsair Vengeance C70 Mid-Tower Gaming Case Gun... 
MouseAudio
Razer Imperator 2012 Realtek ALC898 8-Channel High Definition Audio ... 
CPUMotherboardGraphicsRAM
Intel Core i7 720QM Dell Studio 1557 Intel PM55 ATI Mobility Radeon HD 4500/5100 Series Samsung 2GB DDR3-1333 
RAMHard DriveOptical DriveCooling
Samsung 2GB DDR3-1333 Seagate ST9320325AS HL-DT-ST_DVD+-RW_GA11N Fan + Copper + Aluminum + Shin-Etsu G751 
OSMonitorKeyboardPower
Windows 7 Home Premium 64-bit 15.6" LCD (WXGA) InnoLux BT156GW01 Dell Studio 1557 Keyboard Dell 90W AC Adapter 
Audio
IDT High Definition Audio CODEC 
  hide details  
Reply
Superhero Effect
(26 items)
 
   
CPUMotherboardGraphicsRAM
Intel Core i7-3820 @4.7GHz Asus P9X79 PRO 2 x Sapphire R9 290 4GB GDDR5 Corsair Vengeance CMZ16GX3M4X1600C9 (16GB) 
Hard DriveHard DriveOptical DriveCooling
WD WD6400AAVS 640GB 8MB SATA-II Caviar Green 2 x Plextor PX-M5S 128GB (RAID0) Liteon 12x Blu-ray Drive COMBO 2 x (EK-FC R9-290X - Acetal, EK-FC R9-290X Back... 
CoolingCoolingCoolingCooling
Koolance Ball Valve VLV-BL1X2 XSPC D5 Dual Bay Reservoir/Pump Combo Hardware Labs Black Ice GT Stealth 360mm Hardware Labs Black Ice SR-1 120 
CoolingCoolingCoolingCooling
XSPC EX240 2x120mm radiator 5 x Corsair SP120 High Performance 2 x Corsair SP120 PWM High Performance XSPC Raystorm 
CoolingCoolingOSMonitor
NZXT Sentry 2 fan controller PrimoFlex Advanced LRT 10ft Tubing - 7/16in. ID... Windows 10 Home 64-bit Samsung SyncMaster B2330H 23" 
MonitorKeyboardPowerCase
Philips 236G3DHSB 3D LCD LED 23" Razer BlackWidow Ultimate Seasonic X-1050 1050W Corsair Vengeance C70 Mid-Tower Gaming Case Gun... 
MouseAudio
Razer Imperator 2012 Realtek ALC898 8-Channel High Definition Audio ... 
CPUMotherboardGraphicsRAM
Intel Core i7 720QM Dell Studio 1557 Intel PM55 ATI Mobility Radeon HD 4500/5100 Series Samsung 2GB DDR3-1333 
RAMHard DriveOptical DriveCooling
Samsung 2GB DDR3-1333 Seagate ST9320325AS HL-DT-ST_DVD+-RW_GA11N Fan + Copper + Aluminum + Shin-Etsu G751 
OSMonitorKeyboardPower
Windows 7 Home Premium 64-bit 15.6" LCD (WXGA) InnoLux BT156GW01 Dell Studio 1557 Keyboard Dell 90W AC Adapter 
Audio
IDT High Definition Audio CODEC 
  hide details  
Reply
post #1684 of 3620
Quote:
Originally Posted by gupsterg View Post

Have you done RAM timings tighter?

When your card is using stock ROM what do you get as voltages for DPM 0 -7?

i've never done anything tighter then 1125 timings.

DPM has always confused me, once you guys got away from talking about ram timings and to voltages i stopped keeping up with this thread lol.

i didn't reboot like EVVD told me to, but my clock is stock right now and it says 1.275 1080MHz DPM7. i'll reboot and not start up iTurbo or clockblocker and then tell you again.

EDIT: i rebooted and it says the same thing :-\
Edited by navjack27 - 2/4/16 at 9:10pm
post #1685 of 3620
DPM is easy to understand

its value that tells the card which voltage to use based on current frequency

you will never see exact voltage value in gpu-z as its in bios because of voltage drop
(but 2D voltage = DPM 0 is pretty close if you card does not have offset for VRM controller)
FX
(7 items)
 
  
CPUMotherboardGraphicsRAM
FX-8320@4.4Ghz M5A99FX PRO R2.0 AMD Radeon R9 290X Patriot Memory  
Hard DriveCoolingMonitor
Samsung 840 Raijintek Ereboss iiyama X4071UHSU (4K) 
  hide details  
Reply
FX
(7 items)
 
  
CPUMotherboardGraphicsRAM
FX-8320@4.4Ghz M5A99FX PRO R2.0 AMD Radeon R9 290X Patriot Memory  
Hard DriveCoolingMonitor
Samsung 840 Raijintek Ereboss iiyama X4071UHSU (4K) 
  hide details  
Reply
post #1686 of 3620
post #1687 of 3620
Thread Starter 
@kizwan

Nice results thumb.gif , so using Crimson was giving my card the higher graphics score.

I think this is my best Heavensward result so far using 1100/1525 (maximum preset, 1080P).



Will try 1150/1500.

score20160205072412.txt 5k .txt file

TBH when I swapped from a Tri-X 290 to Vapor-X 290X I was a bit disappointed. Comparing FRAPS data for several games, I saw minuscule or no gain . I only did the swap out as it was a no cost change.

@navjack27

Regarding DPM voltage ref the heading GPU Voltage adjustment , has been updated recently with even hawaireader images.

I use 1250MHz in 1500 / 1625 straps, so I would think using 1125 one's in higher straps is pretty tight.

Nav any chance you can use AiDA64 like in video below and attach TXT to post?

*** edit ***

1150 / 1575 Heavensward


score20160205112952.txt 5k .txt file
Edited by gupsterg - 2/5/16 at 3:58am
The Stilt Machine
(14 items)
 
XPS - i5 4690K
(12 items)
 
XPS - Q6600
(8 items)
 
CPUMotherboardGraphicsRAM
Ryzen 7 1700 Asus Crosshair VI Hero Sapphire Fury X@1145/545 G.Skill Trident Z 2x 8GB 3200MHz C14 
Hard DriveCoolingCoolingCooling
Samsung Evo 840 ThermalRight Archon IB-E X2 + 2x TY143 ThermalRight TY-143 2x front case intake Arctic Cooling F12 + 2x F9 as rear case exhaust 
OSMonitorKeyboardPower
Win 7 Pro x64 / Win 10 Pro x64 Asus MG279Q Cherry MX-Board 3.0 Cooler Master V850 
CaseMouse
SilverStone TJ06 Logitech G700S 
CPUMotherboardGraphicsRAM
i5 4690K@4.9GHz 1.255V Asus Maximus VII Ranger Sapphire Fury X@1145/545 HyperX Savage 2x8GB 2400MHz C11 
Hard DriveCoolingOSMonitor
Samsung Evo 840 TR Archon SB-E X2 Win 7 Pro x64 / Win 10 x64 Asus MG279Q 
KeyboardPowerCaseMouse
Cherry MX-Board 3.0 Cooler Master V850 SilverStone TJ06 Logitech G700S 
CPUMotherboardGraphicsRAM
Intel Q6600 G0 Asus P5K Premium Black Pearl Sapphire Toxic HD5850 Corsair Dominator 4GB 
Hard DriveCoolingOSPower
Crucial MX 100 256GB TR TRUE Rev.A Win 7 Pro x64 Cooler Master V650 
  hide details  
Reply
The Stilt Machine
(14 items)
 
XPS - i5 4690K
(12 items)
 
XPS - Q6600
(8 items)
 
CPUMotherboardGraphicsRAM
Ryzen 7 1700 Asus Crosshair VI Hero Sapphire Fury X@1145/545 G.Skill Trident Z 2x 8GB 3200MHz C14 
Hard DriveCoolingCoolingCooling
Samsung Evo 840 ThermalRight Archon IB-E X2 + 2x TY143 ThermalRight TY-143 2x front case intake Arctic Cooling F12 + 2x F9 as rear case exhaust 
OSMonitorKeyboardPower
Win 7 Pro x64 / Win 10 Pro x64 Asus MG279Q Cherry MX-Board 3.0 Cooler Master V850 
CaseMouse
SilverStone TJ06 Logitech G700S 
CPUMotherboardGraphicsRAM
i5 4690K@4.9GHz 1.255V Asus Maximus VII Ranger Sapphire Fury X@1145/545 HyperX Savage 2x8GB 2400MHz C11 
Hard DriveCoolingOSMonitor
Samsung Evo 840 TR Archon SB-E X2 Win 7 Pro x64 / Win 10 x64 Asus MG279Q 
KeyboardPowerCaseMouse
Cherry MX-Board 3.0 Cooler Master V850 SilverStone TJ06 Logitech G700S 
CPUMotherboardGraphicsRAM
Intel Q6600 G0 Asus P5K Premium Black Pearl Sapphire Toxic HD5850 Corsair Dominator 4GB 
Hard DriveCoolingOSPower
Crucial MX 100 256GB TR TRUE Rev.A Win 7 Pro x64 Cooler Master V650 
  hide details  
Reply
post #1688 of 3620
Code:
BIOS PowerPlay State #0:
- Level #0: GPUClock = 1080 MHz, MemClock = 1500 MHz, VID = 4.098 V  (Boot)
BIOS PowerPlay State #1:
- Level #0: GPUClock =  300 MHz, MemClock =  150 MHz, VID = 0.256 V
- Level #1: GPUClock = 1080 MHz, MemClock = 1500 MHz, VID = 4.098 V

------[ ADL GPU Info ]------

Part Number  = MS-V30823-F2
BIOS Version = 015.048.000.062
BIOS Date    = 2015/05/21 03:39
Memory Type  = GDDR5
GPU Clock    = 1100 MHz
Memory Clock = 1625 MHz
VDDC         = 0 mV
DPM State    = 0
GPU Usage    = 5 %

------[ ADL PStates List ]------

State #0: GPUClock =  300 MHz, MemClock =  150 MHz, VID = 0.000 V
State #1: GPUClock = 1080 MHz, MemClock = 1500 MHz, VID = 0.000 V

------[ GPU PStates List ]------

DPM0: GPUClock =  300 MHz, VID = 0.90000 V
DPM1: GPUClock =  533 MHz, VID = 0.96800 V
DPM2: GPUClock =  796 MHz, VID = 1.11200 V
DPM3: GPUClock =  918 MHz, VID = 1.16200 V
DPM4: GPUClock =  970 MHz, VID = 1.20600 V
DPM5: GPUClock = 1015 MHz, VID = 1.25000 V
DPM6: GPUClock = 1050 MHz, VID = 1.27500 V
DPM7: GPUClock = 1100 MHz, VID = 1.27500 V

------[ ATIDriver Calls ]------

ATIDriver Performance Switching: Not Supported

ATIDriver MultiVPU: Not Supported


atigpureg.txt 43k .txt file
post #1689 of 3620
Thread Starter 
Cheers .

I've seen 3 logs for 390X owners and all DPM 7 = 1.275v. It seems to me they require higher VID to be clocked as they are out of the box.

When you added 125mV offset to do 1175/1750 your basically at 1.4v VID.

As AiDA 64/ Stilt's app doesn't take a programmed offset into account, at stock settings what's your VDDC in GPU-Z @ idle @ stock?
Edited by gupsterg - 2/5/16 at 1:11am
The Stilt Machine
(14 items)
 
XPS - i5 4690K
(12 items)
 
XPS - Q6600
(8 items)
 
CPUMotherboardGraphicsRAM
Ryzen 7 1700 Asus Crosshair VI Hero Sapphire Fury X@1145/545 G.Skill Trident Z 2x 8GB 3200MHz C14 
Hard DriveCoolingCoolingCooling
Samsung Evo 840 ThermalRight Archon IB-E X2 + 2x TY143 ThermalRight TY-143 2x front case intake Arctic Cooling F12 + 2x F9 as rear case exhaust 
OSMonitorKeyboardPower
Win 7 Pro x64 / Win 10 Pro x64 Asus MG279Q Cherry MX-Board 3.0 Cooler Master V850 
CaseMouse
SilverStone TJ06 Logitech G700S 
CPUMotherboardGraphicsRAM
i5 4690K@4.9GHz 1.255V Asus Maximus VII Ranger Sapphire Fury X@1145/545 HyperX Savage 2x8GB 2400MHz C11 
Hard DriveCoolingOSMonitor
Samsung Evo 840 TR Archon SB-E X2 Win 7 Pro x64 / Win 10 x64 Asus MG279Q 
KeyboardPowerCaseMouse
Cherry MX-Board 3.0 Cooler Master V850 SilverStone TJ06 Logitech G700S 
CPUMotherboardGraphicsRAM
Intel Q6600 G0 Asus P5K Premium Black Pearl Sapphire Toxic HD5850 Corsair Dominator 4GB 
Hard DriveCoolingOSPower
Crucial MX 100 256GB TR TRUE Rev.A Win 7 Pro x64 Cooler Master V650 
  hide details  
Reply
The Stilt Machine
(14 items)
 
XPS - i5 4690K
(12 items)
 
XPS - Q6600
(8 items)
 
CPUMotherboardGraphicsRAM
Ryzen 7 1700 Asus Crosshair VI Hero Sapphire Fury X@1145/545 G.Skill Trident Z 2x 8GB 3200MHz C14 
Hard DriveCoolingCoolingCooling
Samsung Evo 840 ThermalRight Archon IB-E X2 + 2x TY143 ThermalRight TY-143 2x front case intake Arctic Cooling F12 + 2x F9 as rear case exhaust 
OSMonitorKeyboardPower
Win 7 Pro x64 / Win 10 Pro x64 Asus MG279Q Cherry MX-Board 3.0 Cooler Master V850 
CaseMouse
SilverStone TJ06 Logitech G700S 
CPUMotherboardGraphicsRAM
i5 4690K@4.9GHz 1.255V Asus Maximus VII Ranger Sapphire Fury X@1145/545 HyperX Savage 2x8GB 2400MHz C11 
Hard DriveCoolingOSMonitor
Samsung Evo 840 TR Archon SB-E X2 Win 7 Pro x64 / Win 10 x64 Asus MG279Q 
KeyboardPowerCaseMouse
Cherry MX-Board 3.0 Cooler Master V850 SilverStone TJ06 Logitech G700S 
CPUMotherboardGraphicsRAM
Intel Q6600 G0 Asus P5K Premium Black Pearl Sapphire Toxic HD5850 Corsair Dominator 4GB 
Hard DriveCoolingOSPower
Crucial MX 100 256GB TR TRUE Rev.A Win 7 Pro x64 Cooler Master V650 
  hide details  
Reply
post #1690 of 3620
Quote:
Originally Posted by gupsterg View Post

Cheers .

I've seen 3 logs for 390X owners and all DPM 7 = 1.275v. It seems to me they require higher VID to be clocked as they are out of the box.

When you added 125mV offset to do 1175/1750 your basically at 1.4v VID.

As AiDA 64/ Stilt's app doesn't take a programmed offset into account, at stock settings what's your VDDC in GPU-Z @ idle @ stock?
This is what I was saying the whole time tongue.gif
390X cards came out with higher clocks but with higher volts as well and ppl didnt know about it and they were thinking o.O my card clocks better because when I add +100mV then I can reach 1150MHz easy but they didnt realize they were pushing 1.4v in...
290X could do the same(if only the coolers allowed it biggrin.gifbiggrin.gifbiggrin.gif)
Just for comparison, my 290X gpu1 core has 1.19300V only. That's a big difference...
Edited by fat4l - 2/5/16 at 1:30am
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD/ATI
Overclock.net › Forums › Graphics Cards › AMD/ATI › Hawaii Bios Editing ( 290 / 290X / 295X2 / 390 / 390X )