Overclock.net › Forums › Graphics Cards › AMD/ATI › Hawaii Bios Editing ( 290 / 290X / 295X2 / 390 / 390X )
New Posts  All Forums:Forum Nav:

Hawaii Bios Editing ( 290 / 290X / 295X2 / 390 / 390X ) - Page 179

post #1781 of 3620
Quick update:

So I've only had the time to try out your rom with the 390MC timings (or I assume that's what the label means). It performs well, as is with no edits, in Win 10. It also reduces my idle voltage to 993mv and load voltage to 1195mv. Nice.

Of course I still have the tearing in OS X. So I tried a few iterations only modifying the idle mem clocks: first 200, then 300, then 800. In each case, the higher the clock, the lower the tearing in OS X. But nothing eliminated it entirely. I wonder if when I have the memory clock running at 800 at idle what's happening is that the computer is sitting at this idle longer than it would sit at idle at 150 or 300 memory clocks, so what I'm seeing is simply fewer mem frequency transitions? If so, it might not be an issue of the mem clock running too low-- but an issue that occurs any time the memory clock changes frequency at all in OS X. OS X graphics drivers, particularly for the R9 290/390 (which Apple never sold, but has written drivers for, so it is recognized to an extent), leave a lot to be desired.

The only thing that works in OS X is to run the mem clock at 1250 at all times-- I can still let the GPU core move itself through the DPM states dynamically. I did this by changing Mem Clock 3 to 1250, but leaving the Mem Freq Table as is (150 at DPM 0). Frustratingly, I am unable to monitor what the GPU core/mem are actually doing once I boot OS X, because the HW Sensors (as is well documented) there do not pick up the GPU (it always reports 0 degrees, and doesn't show GPU fan/core/mem) though the GPU fans definitely move dynamically depending on temperatures. With this setup, booting into Windows, I can see with GPUz that the mem clock is idling at 1250 and the GPU core is idling at 300... the reported voltage is 993mv in this state, which is what I have DPM 0 set to. I hope I'm not causing damage by running this way. It does sound like the GPU fans are running faster at idle in OS X than Windows.

I think I need to test a few more iterations to see if I can prevent tearing while maximizing efficiency. Perhaps I can get my idle voltage lower while leaving the mem running at full speed. Or I could even downclock the memory in the VBios (so it runs at lower DPM 0 and lower frequency in OS X), and use AB or AMD to clock the memory back up to 1250 in Windows.

I've attached the modified version of your rom in case that's of interest. Happy to test a few more things.

F390M3.rom.zip 98k .zip file

*** EDIT ***

I should mention that I changed the values in the Fan tab to those that match the ones from the stock "performance" VBios. I think the only thing that changed, from memory, were the last two items: changing the mode from 1 to 0, and the fan value at the bottom from 56 to 60.
My System
(19 items)
 
  
CPUMotherboardGraphicsGraphics
Xeon X5650 GA-X58-UD3R Windforce R9 290 XFX 5770 Single Slot 
RAMHard DriveHard DriveHard Drive
PNY 1866 DIMM G.Skill Sniper 60 SSD MX100 256 GB Toshiba 7200 
Hard DriveHard DriveCoolingOS
Seagate 3 TB Samsung 1 TB 212+ OS X El Capitan 
OSMonitorPowerCase
Windows 10 Professional 27" Apple Cinema Display Corsair RM850x Antec Three Hundred Two 
  hide details  
Reply
My System
(19 items)
 
  
CPUMotherboardGraphicsGraphics
Xeon X5650 GA-X58-UD3R Windforce R9 290 XFX 5770 Single Slot 
RAMHard DriveHard DriveHard Drive
PNY 1866 DIMM G.Skill Sniper 60 SSD MX100 256 GB Toshiba 7200 
Hard DriveHard DriveCoolingOS
Seagate 3 TB Samsung 1 TB 212+ OS X El Capitan 
OSMonitorPowerCase
Windows 10 Professional 27" Apple Cinema Display Corsair RM850x Antec Three Hundred Two 
  hide details  
Reply
post #1782 of 3620
is it possible to use method Adding 390/X MC Timings (v3.1) to a 290/X & 295X2 ROM to edit 390 bios to change MC Timings from Hynix to Elpida?
post #1783 of 3620
Thread Starter 
Quote:
Originally Posted by kizwan View Post

Ermm...what is I'm doing right now? I checked & let you know now, a couple posts ago.

Please accept my apologies for not following your guidance on which section was being discussed.

Please test mod, then we may possibly narrow down if that section sets MC timings, I appreciate it smile.gif . I have added labels to segment 2 & 4 as per Atomdis parsing smile.gif .



I will test adding segment 3 from AJR to to stock AFR VRAM_Info, to see if I get a boost. I would assume segment 6 also need be added but will add that after, then edit RRF from 01 to 02. This way I'll know if the hex changes in segment 1 besides RRF make a difference.

Again thank you for input & your time smile.gif .
Quote:
Originally Posted by nwxan90 View Post

Absolutely no problem Anything else I can help with let me know.

Will do and thanks, if there is anything we can do in return likewise post.
Quote:
Originally Posted by justruss View Post

So I've only had the time to try out your rom with the 390MC timings (or I assume that's what the label means). It performs well, as is with no edits, in Win 10. It also reduces my idle voltage to 993mv and load voltage to 1195mv. Nice.

Yep label means what you think smile.gif, thank you for confirming your voltages are now without offset.

DPM7: GPUClock = 1040 MHz, VID = 1.25000 V

You posted your DPM7 = 1.25V (stock rom uses EVV mode), due to various factors what you get as VDDC under load will differ depending on app used to "load card up", regardless of EVV or manual VID. For same app prior to fixed ROM what was VDDC under load? cheers.
Quote:
Originally Posted by justruss View Post

I should mention that I changed the values in the Fan tab to those that match the ones from the stock "performance" VBios. I think the only thing that changed, from memory, were the last two items: changing the mode from 1 to 0, and the fan value at the bottom from 56 to 60.

The 1 to 0 was disabling "Fuzzy Logic" fan mode, it's used in "Silent/Quiet" ROMs. OP has info on that and the other value you've changed from 56 to 60, please post screenie so make it quicker to comment what it was.
Quote:
Originally Posted by justruss View Post

I hope I'm not causing damage by running this way. It does sound like the GPU fans are running faster at idle in OS X than Windows.

IMO no damage running 1250MHz for RAM all the time, slightly power usage will go up that's all IMO. Fan difference between windows & OS X for same ROM comparison I'd think it's something probably down to how OS X driver working, but don't know.
Quote:
Originally Posted by gungstar View Post

is it possible to use method Adding 390/X MC Timings (v3.1) to a 290/X & 295X2 ROM to edit 390 bios to change MC Timings from Hynix to Elpida?

Yes, use video as method but use offset locations depending on you own ROM and mod the appropriate "file" in zip to your ROM.
Edited by gupsterg - 2/9/16 at 5:50am
The Stilt Machine
(14 items)
 
XPS - i5 4690K
(12 items)
 
XPS - Q6600
(8 items)
 
CPUMotherboardGraphicsRAM
Ryzen 7 1700 Asus Crosshair VI Hero Sapphire Fury X@1145/545 G.Skill Trident Z 2x 8GB 3200MHz C14 
Hard DriveCoolingCoolingCooling
Samsung Evo 840 ThermalRight Archon IB-E X2 + 2x TY143 ThermalRight TY-143 2x front case intake Arctic Cooling F12 + 2x F9 as rear case exhaust 
OSMonitorKeyboardPower
Win 7 Pro x64 / Win 10 Pro x64 Asus MG279Q Cherry MX-Board 3.0 Cooler Master V850 
CaseMouse
SilverStone TJ06 Logitech G700S 
CPUMotherboardGraphicsRAM
i5 4690K@4.9GHz 1.255V Asus Maximus VII Ranger Sapphire Fury X@1145/545 HyperX Savage 2x8GB 2400MHz C11 
Hard DriveCoolingOSMonitor
Samsung Evo 840 TR Archon SB-E X2 Win 7 Pro x64 / Win 10 x64 Asus MG279Q 
KeyboardPowerCaseMouse
Cherry MX-Board 3.0 Cooler Master V850 SilverStone TJ06 Logitech G700S 
CPUMotherboardGraphicsRAM
Intel Q6600 G0 Asus P5K Premium Black Pearl Sapphire Toxic HD5850 Corsair Dominator 4GB 
Hard DriveCoolingOSPower
Crucial MX 100 256GB TR TRUE Rev.A Win 7 Pro x64 Cooler Master V650 
  hide details  
Reply
The Stilt Machine
(14 items)
 
XPS - i5 4690K
(12 items)
 
XPS - Q6600
(8 items)
 
CPUMotherboardGraphicsRAM
Ryzen 7 1700 Asus Crosshair VI Hero Sapphire Fury X@1145/545 G.Skill Trident Z 2x 8GB 3200MHz C14 
Hard DriveCoolingCoolingCooling
Samsung Evo 840 ThermalRight Archon IB-E X2 + 2x TY143 ThermalRight TY-143 2x front case intake Arctic Cooling F12 + 2x F9 as rear case exhaust 
OSMonitorKeyboardPower
Win 7 Pro x64 / Win 10 Pro x64 Asus MG279Q Cherry MX-Board 3.0 Cooler Master V850 
CaseMouse
SilverStone TJ06 Logitech G700S 
CPUMotherboardGraphicsRAM
i5 4690K@4.9GHz 1.255V Asus Maximus VII Ranger Sapphire Fury X@1145/545 HyperX Savage 2x8GB 2400MHz C11 
Hard DriveCoolingOSMonitor
Samsung Evo 840 TR Archon SB-E X2 Win 7 Pro x64 / Win 10 x64 Asus MG279Q 
KeyboardPowerCaseMouse
Cherry MX-Board 3.0 Cooler Master V850 SilverStone TJ06 Logitech G700S 
CPUMotherboardGraphicsRAM
Intel Q6600 G0 Asus P5K Premium Black Pearl Sapphire Toxic HD5850 Corsair Dominator 4GB 
Hard DriveCoolingOSPower
Crucial MX 100 256GB TR TRUE Rev.A Win 7 Pro x64 Cooler Master V650 
  hide details  
Reply
post #1784 of 3620
All tests for load used GPUz render test.

On Gigabyte Stock ROM VDDC at load was 1203 mv
On your 390mc rom, before I edited anything it was 1195mv
On your 390mc rom, after editing only idle mem clocks it was 1195mv

I haven't changed core clocks or any voltages for any DPM levels yet. So I guess this is still using EVV, but without any offset now.
As I tinker I will report back. I'm also happy to try things out if it's of help. I'm also happy to re-run AIDA64 to see what it's reporting for VID at each of the DPM levels if that's of any interest. (I'm using the demo, so it's going to work for 30 more days or so.)
My System
(19 items)
 
  
CPUMotherboardGraphicsGraphics
Xeon X5650 GA-X58-UD3R Windforce R9 290 XFX 5770 Single Slot 
RAMHard DriveHard DriveHard Drive
PNY 1866 DIMM G.Skill Sniper 60 SSD MX100 256 GB Toshiba 7200 
Hard DriveHard DriveCoolingOS
Seagate 3 TB Samsung 1 TB 212+ OS X El Capitan 
OSMonitorPowerCase
Windows 10 Professional 27" Apple Cinema Display Corsair RM850x Antec Three Hundred Two 
  hide details  
Reply
My System
(19 items)
 
  
CPUMotherboardGraphicsGraphics
Xeon X5650 GA-X58-UD3R Windforce R9 290 XFX 5770 Single Slot 
RAMHard DriveHard DriveHard Drive
PNY 1866 DIMM G.Skill Sniper 60 SSD MX100 256 GB Toshiba 7200 
Hard DriveHard DriveCoolingOS
Seagate 3 TB Samsung 1 TB 212+ OS X El Capitan 
OSMonitorPowerCase
Windows 10 Professional 27" Apple Cinema Display Corsair RM850x Antec Three Hundred Two 
  hide details  
Reply
post #1785 of 3620
this is because of offset or vrm switching frequency
FX
(7 items)
 
  
CPUMotherboardGraphicsRAM
FX-8320@4.4Ghz M5A99FX PRO R2.0 AMD Radeon R9 290X Patriot Memory  
Hard DriveCoolingMonitor
Samsung 840 Raijintek Ereboss iiyama X4071UHSU (4K) 
  hide details  
Reply
FX
(7 items)
 
  
CPUMotherboardGraphicsRAM
FX-8320@4.4Ghz M5A99FX PRO R2.0 AMD Radeon R9 290X Patriot Memory  
Hard DriveCoolingMonitor
Samsung 840 Raijintek Ereboss iiyama X4071UHSU (4K) 
  hide details  
Reply
post #1786 of 3620
Thread Starter 
@justruss

+ rep for info smile.gif , glad you used GPU-Z render test thumb.gif .

Very strange the stock Gigabyte ROM plus voltage controller chip setup (IR3567B).

SO with stock ROM idle is 0.993V but due to whatever is going on with VoltageObjectInfo / IR3567B MTP config = 1.080V , ~ +0.087V. Then your load VDDC on stock = 1.203V and modified = 1.195V, ~ +0.008V.

Glad it's sorted now smile.gif , no need for AiDA 64 VID report as it does not take into account offsets and it will still report same between stock and modified ROM I supplied. SMBus dump be great for stock vs modified I supplied wink.gif .

"Efficiency @ Idle" table will be fine if your not modding DPM 0 voltage/freq., if you do then we'll sort it smile.gif .
Other tweak you could try is (Click to show)

Link:- Berkeley's post

Don't know how that tweak be useful to you but at least you have info smile.gif .
Edited by gupsterg - 2/9/16 at 7:28am
The Stilt Machine
(14 items)
 
XPS - i5 4690K
(12 items)
 
XPS - Q6600
(8 items)
 
CPUMotherboardGraphicsRAM
Ryzen 7 1700 Asus Crosshair VI Hero Sapphire Fury X@1145/545 G.Skill Trident Z 2x 8GB 3200MHz C14 
Hard DriveCoolingCoolingCooling
Samsung Evo 840 ThermalRight Archon IB-E X2 + 2x TY143 ThermalRight TY-143 2x front case intake Arctic Cooling F12 + 2x F9 as rear case exhaust 
OSMonitorKeyboardPower
Win 7 Pro x64 / Win 10 Pro x64 Asus MG279Q Cherry MX-Board 3.0 Cooler Master V850 
CaseMouse
SilverStone TJ06 Logitech G700S 
CPUMotherboardGraphicsRAM
i5 4690K@4.9GHz 1.255V Asus Maximus VII Ranger Sapphire Fury X@1145/545 HyperX Savage 2x8GB 2400MHz C11 
Hard DriveCoolingOSMonitor
Samsung Evo 840 TR Archon SB-E X2 Win 7 Pro x64 / Win 10 x64 Asus MG279Q 
KeyboardPowerCaseMouse
Cherry MX-Board 3.0 Cooler Master V850 SilverStone TJ06 Logitech G700S 
CPUMotherboardGraphicsRAM
Intel Q6600 G0 Asus P5K Premium Black Pearl Sapphire Toxic HD5850 Corsair Dominator 4GB 
Hard DriveCoolingOSPower
Crucial MX 100 256GB TR TRUE Rev.A Win 7 Pro x64 Cooler Master V650 
  hide details  
Reply
The Stilt Machine
(14 items)
 
XPS - i5 4690K
(12 items)
 
XPS - Q6600
(8 items)
 
CPUMotherboardGraphicsRAM
Ryzen 7 1700 Asus Crosshair VI Hero Sapphire Fury X@1145/545 G.Skill Trident Z 2x 8GB 3200MHz C14 
Hard DriveCoolingCoolingCooling
Samsung Evo 840 ThermalRight Archon IB-E X2 + 2x TY143 ThermalRight TY-143 2x front case intake Arctic Cooling F12 + 2x F9 as rear case exhaust 
OSMonitorKeyboardPower
Win 7 Pro x64 / Win 10 Pro x64 Asus MG279Q Cherry MX-Board 3.0 Cooler Master V850 
CaseMouse
SilverStone TJ06 Logitech G700S 
CPUMotherboardGraphicsRAM
i5 4690K@4.9GHz 1.255V Asus Maximus VII Ranger Sapphire Fury X@1145/545 HyperX Savage 2x8GB 2400MHz C11 
Hard DriveCoolingOSMonitor
Samsung Evo 840 TR Archon SB-E X2 Win 7 Pro x64 / Win 10 x64 Asus MG279Q 
KeyboardPowerCaseMouse
Cherry MX-Board 3.0 Cooler Master V850 SilverStone TJ06 Logitech G700S 
CPUMotherboardGraphicsRAM
Intel Q6600 G0 Asus P5K Premium Black Pearl Sapphire Toxic HD5850 Corsair Dominator 4GB 
Hard DriveCoolingOSPower
Crucial MX 100 256GB TR TRUE Rev.A Win 7 Pro x64 Cooler Master V650 
  hide details  
Reply
post #1787 of 3620
Quote:
Originally Posted by gupsterg View Post

@justruss

+ rep for info smile.gif , glad you used GPU-Z render test thumb.gif .

Very strange the stock Gigabyte ROM plus voltage controller chip setup (IR3567B).

SO with stock ROM idle is 0.993V but due to whatever is going on with VoltageObjectInfo / IR3567B MTP config = 1.080V , ~ +0.087V. Then your load VDDC on stock = 1.203V and modified = 1.195V, ~ +0.008V.

Glad it's sorted now smile.gif , no need for AiDA 64 VID report as it does not take into account offsets and it will still report same between stock and modified ROM I supplied. SMBus dump be great for stock vs modified I supplied wink.gif .

"Efficiency @ Idle" table will be fine if your not modding DPM 0 voltage, if you do then we'll sort it smile.gif .
Other tweak you could try is (Click to show)

Link:- Berkeley's post

Don't know how that tweak be useful to you but at least you have info smile.gif .

Let me check my data-- the stock shift looks wrong! I think that was supposed to be 0.993V VID to VDDC 1.008V on the stock Gigabyte Rom at idle, and load VDDC of 1.203V. The other numbers are correct. I think I just mistyped where the 8 should be! I should have the logs I can refer to and include the correct information later.
My System
(19 items)
 
  
CPUMotherboardGraphicsGraphics
Xeon X5650 GA-X58-UD3R Windforce R9 290 XFX 5770 Single Slot 
RAMHard DriveHard DriveHard Drive
PNY 1866 DIMM G.Skill Sniper 60 SSD MX100 256 GB Toshiba 7200 
Hard DriveHard DriveCoolingOS
Seagate 3 TB Samsung 1 TB 212+ OS X El Capitan 
OSMonitorPowerCase
Windows 10 Professional 27" Apple Cinema Display Corsair RM850x Antec Three Hundred Two 
  hide details  
Reply
My System
(19 items)
 
  
CPUMotherboardGraphicsGraphics
Xeon X5650 GA-X58-UD3R Windforce R9 290 XFX 5770 Single Slot 
RAMHard DriveHard DriveHard Drive
PNY 1866 DIMM G.Skill Sniper 60 SSD MX100 256 GB Toshiba 7200 
Hard DriveHard DriveCoolingOS
Seagate 3 TB Samsung 1 TB 212+ OS X El Capitan 
OSMonitorPowerCase
Windows 10 Professional 27" Apple Cinema Display Corsair RM850x Antec Three Hundred Two 
  hide details  
Reply
post #1788 of 3620
Thread Starter 
No worries smile.gif .

I have also corrected my mistake in last post redface.gif , I'll put it down to the late night playing with the Tri-X 290 I acquired yesterday redface.gif .

Here is info on "Efficiency @ idle" section, @DDSZ had marked these values ages ago on Guru3D but we only got info on it when I was marking PowerPlay for another mod and queried the Stilt about it's purpose.



Perhaps modding these may help your tearing@idle situation coupled with what you're doing already? if they do please report back smile.gif .
The Stilt Machine
(14 items)
 
XPS - i5 4690K
(12 items)
 
XPS - Q6600
(8 items)
 
CPUMotherboardGraphicsRAM
Ryzen 7 1700 Asus Crosshair VI Hero Sapphire Fury X@1145/545 G.Skill Trident Z 2x 8GB 3200MHz C14 
Hard DriveCoolingCoolingCooling
Samsung Evo 840 ThermalRight Archon IB-E X2 + 2x TY143 ThermalRight TY-143 2x front case intake Arctic Cooling F12 + 2x F9 as rear case exhaust 
OSMonitorKeyboardPower
Win 7 Pro x64 / Win 10 Pro x64 Asus MG279Q Cherry MX-Board 3.0 Cooler Master V850 
CaseMouse
SilverStone TJ06 Logitech G700S 
CPUMotherboardGraphicsRAM
i5 4690K@4.9GHz 1.255V Asus Maximus VII Ranger Sapphire Fury X@1145/545 HyperX Savage 2x8GB 2400MHz C11 
Hard DriveCoolingOSMonitor
Samsung Evo 840 TR Archon SB-E X2 Win 7 Pro x64 / Win 10 x64 Asus MG279Q 
KeyboardPowerCaseMouse
Cherry MX-Board 3.0 Cooler Master V850 SilverStone TJ06 Logitech G700S 
CPUMotherboardGraphicsRAM
Intel Q6600 G0 Asus P5K Premium Black Pearl Sapphire Toxic HD5850 Corsair Dominator 4GB 
Hard DriveCoolingOSPower
Crucial MX 100 256GB TR TRUE Rev.A Win 7 Pro x64 Cooler Master V650 
  hide details  
Reply
The Stilt Machine
(14 items)
 
XPS - i5 4690K
(12 items)
 
XPS - Q6600
(8 items)
 
CPUMotherboardGraphicsRAM
Ryzen 7 1700 Asus Crosshair VI Hero Sapphire Fury X@1145/545 G.Skill Trident Z 2x 8GB 3200MHz C14 
Hard DriveCoolingCoolingCooling
Samsung Evo 840 ThermalRight Archon IB-E X2 + 2x TY143 ThermalRight TY-143 2x front case intake Arctic Cooling F12 + 2x F9 as rear case exhaust 
OSMonitorKeyboardPower
Win 7 Pro x64 / Win 10 Pro x64 Asus MG279Q Cherry MX-Board 3.0 Cooler Master V850 
CaseMouse
SilverStone TJ06 Logitech G700S 
CPUMotherboardGraphicsRAM
i5 4690K@4.9GHz 1.255V Asus Maximus VII Ranger Sapphire Fury X@1145/545 HyperX Savage 2x8GB 2400MHz C11 
Hard DriveCoolingOSMonitor
Samsung Evo 840 TR Archon SB-E X2 Win 7 Pro x64 / Win 10 x64 Asus MG279Q 
KeyboardPowerCaseMouse
Cherry MX-Board 3.0 Cooler Master V850 SilverStone TJ06 Logitech G700S 
CPUMotherboardGraphicsRAM
Intel Q6600 G0 Asus P5K Premium Black Pearl Sapphire Toxic HD5850 Corsair Dominator 4GB 
Hard DriveCoolingOSPower
Crucial MX 100 256GB TR TRUE Rev.A Win 7 Pro x64 Cooler Master V650 
  hide details  
Reply
post #1789 of 3620
Will do!
My System
(19 items)
 
  
CPUMotherboardGraphicsGraphics
Xeon X5650 GA-X58-UD3R Windforce R9 290 XFX 5770 Single Slot 
RAMHard DriveHard DriveHard Drive
PNY 1866 DIMM G.Skill Sniper 60 SSD MX100 256 GB Toshiba 7200 
Hard DriveHard DriveCoolingOS
Seagate 3 TB Samsung 1 TB 212+ OS X El Capitan 
OSMonitorPowerCase
Windows 10 Professional 27" Apple Cinema Display Corsair RM850x Antec Three Hundred Two 
  hide details  
Reply
My System
(19 items)
 
  
CPUMotherboardGraphicsGraphics
Xeon X5650 GA-X58-UD3R Windforce R9 290 XFX 5770 Single Slot 
RAMHard DriveHard DriveHard Drive
PNY 1866 DIMM G.Skill Sniper 60 SSD MX100 256 GB Toshiba 7200 
Hard DriveHard DriveCoolingOS
Seagate 3 TB Samsung 1 TB 212+ OS X El Capitan 
OSMonitorPowerCase
Windows 10 Professional 27" Apple Cinema Display Corsair RM850x Antec Three Hundred Two 
  hide details  
Reply
post #1790 of 3620
Thread Starter 
Quote:
Originally Posted by justruss View Post

Will do!

cheers.gif

Quote:
Originally Posted by OneB1t View Post

this is because of offset or vrm switching frequency

I think offset or incorrect MTP on IR3567B, did nothing to VRM switching in a way smile.gif .

@DDSZ posted he had same card and had posted info regarding ROM / i2cdump for Stilt to view. So as Stilt guided DDSZ to use MBA stock VoltageObjectInfo, I thought Stilt's MLU 0PM is best to use (reasons in image).

The Stilt Machine
(14 items)
 
XPS - i5 4690K
(12 items)
 
XPS - Q6600
(8 items)
 
CPUMotherboardGraphicsRAM
Ryzen 7 1700 Asus Crosshair VI Hero Sapphire Fury X@1145/545 G.Skill Trident Z 2x 8GB 3200MHz C14 
Hard DriveCoolingCoolingCooling
Samsung Evo 840 ThermalRight Archon IB-E X2 + 2x TY143 ThermalRight TY-143 2x front case intake Arctic Cooling F12 + 2x F9 as rear case exhaust 
OSMonitorKeyboardPower
Win 7 Pro x64 / Win 10 Pro x64 Asus MG279Q Cherry MX-Board 3.0 Cooler Master V850 
CaseMouse
SilverStone TJ06 Logitech G700S 
CPUMotherboardGraphicsRAM
i5 4690K@4.9GHz 1.255V Asus Maximus VII Ranger Sapphire Fury X@1145/545 HyperX Savage 2x8GB 2400MHz C11 
Hard DriveCoolingOSMonitor
Samsung Evo 840 TR Archon SB-E X2 Win 7 Pro x64 / Win 10 x64 Asus MG279Q 
KeyboardPowerCaseMouse
Cherry MX-Board 3.0 Cooler Master V850 SilverStone TJ06 Logitech G700S 
CPUMotherboardGraphicsRAM
Intel Q6600 G0 Asus P5K Premium Black Pearl Sapphire Toxic HD5850 Corsair Dominator 4GB 
Hard DriveCoolingOSPower
Crucial MX 100 256GB TR TRUE Rev.A Win 7 Pro x64 Cooler Master V650 
  hide details  
Reply
The Stilt Machine
(14 items)
 
XPS - i5 4690K
(12 items)
 
XPS - Q6600
(8 items)
 
CPUMotherboardGraphicsRAM
Ryzen 7 1700 Asus Crosshair VI Hero Sapphire Fury X@1145/545 G.Skill Trident Z 2x 8GB 3200MHz C14 
Hard DriveCoolingCoolingCooling
Samsung Evo 840 ThermalRight Archon IB-E X2 + 2x TY143 ThermalRight TY-143 2x front case intake Arctic Cooling F12 + 2x F9 as rear case exhaust 
OSMonitorKeyboardPower
Win 7 Pro x64 / Win 10 Pro x64 Asus MG279Q Cherry MX-Board 3.0 Cooler Master V850 
CaseMouse
SilverStone TJ06 Logitech G700S 
CPUMotherboardGraphicsRAM
i5 4690K@4.9GHz 1.255V Asus Maximus VII Ranger Sapphire Fury X@1145/545 HyperX Savage 2x8GB 2400MHz C11 
Hard DriveCoolingOSMonitor
Samsung Evo 840 TR Archon SB-E X2 Win 7 Pro x64 / Win 10 x64 Asus MG279Q 
KeyboardPowerCaseMouse
Cherry MX-Board 3.0 Cooler Master V850 SilverStone TJ06 Logitech G700S 
CPUMotherboardGraphicsRAM
Intel Q6600 G0 Asus P5K Premium Black Pearl Sapphire Toxic HD5850 Corsair Dominator 4GB 
Hard DriveCoolingOSPower
Crucial MX 100 256GB TR TRUE Rev.A Win 7 Pro x64 Cooler Master V650 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD/ATI
Overclock.net › Forums › Graphics Cards › AMD/ATI › Hawaii Bios Editing ( 290 / 290X / 295X2 / 390 / 390X )