Overclock.net › Forums › Graphics Cards › AMD/ATI › Modded R9 390X BIOS for R9 290/290X (Updated 02/16/2016)
New Posts  All Forums:Forum Nav:

Modded R9 390X BIOS for R9 290/290X (Updated 02/16/2016) - Page 104

post #1031 of 1934
I have a problem with my R9 290 tri-x oc, it needs+ 75mV to be able to boot on windows, I have to boot without drivers to install them and to make +75mV on msi after-burner, that is my only problem is that if I have a bug during overclocking when i reboot my cards returns to + 0mV and i'm forced to uninstall the drivers for a new power reboot, but I can very well normally reboot when I did not bug during overclocking, the + 75mV continue, I just talk to you because I would need a bios with mod1.7 as 1160/1625 + 80mv (stable) to avoid having to touch a msi afterburner, I currently have the mod1.7 to + 50mv "M50P" but unfortunately that is not enough for me boot, I don't know change bios I can't, if someone could help me or give me a link to the bios mod1.7 to + 75mV it would help me a lot, thanks all and sorry for my bad english.

Edit: and hawaii fan editor don't work on r9 290mod1.7 i would like to 20%-35° 55%-65° and 100%-75° cause my first vrm take 75° with this configuration and not more.
Edited by Samuris - 2/10/16 at 1:47pm
post #1032 of 1934
Quote:
Originally Posted by Samuris View Post

I currently have the mod1.7 to + 50mv "M50P" but unfortunately that is not enough for me boot, I don't know change bios I can't, if someone could help me or give me a link to the bios mod1.7 to + 75mV it would help me a lot, thanks all and sorry for my bad english.

I can make smile.gif , attach bios and I will do edit.
Quote:
Originally Posted by Samuris View Post

Edit: and hawaii fan editor don't work on r9 290mod1.7 i would like to 20%-35° 55%-65° and 100%-75° cause my first vrm take 75° with this configuration and not more.

View information in this thread, Link:- http://www.overclock.net/t/1561372/hawaii-bios-editing-290-290x-295x2-390-390x
The Stilt Machine
(14 items)
 
XPS - i5 4690K
(12 items)
 
XPS - Q6600
(8 items)
 
CPUMotherboardGraphicsRAM
Ryzen 7 1700 Asus Crosshair VI Hero Sapphire Fury X@1145/545 G.Skill Trident Z 2x 8GB 3200MHz C14 
Hard DriveCoolingCoolingCooling
Samsung Evo 840 ThermalRight Archon IB-E X2 + 2x TY143 ThermalRight TY-143 2x front case intake Arctic Cooling F12 + 2x F9 as rear case exhaust 
OSMonitorKeyboardPower
Win 7 Pro x64 / Win 10 Pro x64 Asus MG279Q Cherry MX-Board 3.0 Cooler Master V850 
CaseMouse
SilverStone TJ06 Logitech G700S 
CPUMotherboardGraphicsRAM
i5 4690K@4.9GHz 1.255V Asus Maximus VII Ranger Sapphire Fury X@1145/545 HyperX Savage 2x8GB 2400MHz C11 
Hard DriveCoolingOSMonitor
Samsung Evo 840 TR Archon SB-E X2 Win 7 Pro x64 / Win 10 x64 Asus MG279Q 
KeyboardPowerCaseMouse
Cherry MX-Board 3.0 Cooler Master V850 SilverStone TJ06 Logitech G700S 
CPUMotherboardGraphicsRAM
Intel Q6600 G0 Asus P5K Premium Black Pearl Sapphire Toxic HD5850 Corsair Dominator 4GB 
Hard DriveCoolingOSPower
Crucial MX 100 256GB TR TRUE Rev.A Win 7 Pro x64 Cooler Master V650 
  hide details  
Reply
The Stilt Machine
(14 items)
 
XPS - i5 4690K
(12 items)
 
XPS - Q6600
(8 items)
 
CPUMotherboardGraphicsRAM
Ryzen 7 1700 Asus Crosshair VI Hero Sapphire Fury X@1145/545 G.Skill Trident Z 2x 8GB 3200MHz C14 
Hard DriveCoolingCoolingCooling
Samsung Evo 840 ThermalRight Archon IB-E X2 + 2x TY143 ThermalRight TY-143 2x front case intake Arctic Cooling F12 + 2x F9 as rear case exhaust 
OSMonitorKeyboardPower
Win 7 Pro x64 / Win 10 Pro x64 Asus MG279Q Cherry MX-Board 3.0 Cooler Master V850 
CaseMouse
SilverStone TJ06 Logitech G700S 
CPUMotherboardGraphicsRAM
i5 4690K@4.9GHz 1.255V Asus Maximus VII Ranger Sapphire Fury X@1145/545 HyperX Savage 2x8GB 2400MHz C11 
Hard DriveCoolingOSMonitor
Samsung Evo 840 TR Archon SB-E X2 Win 7 Pro x64 / Win 10 x64 Asus MG279Q 
KeyboardPowerCaseMouse
Cherry MX-Board 3.0 Cooler Master V850 SilverStone TJ06 Logitech G700S 
CPUMotherboardGraphicsRAM
Intel Q6600 G0 Asus P5K Premium Black Pearl Sapphire Toxic HD5850 Corsair Dominator 4GB 
Hard DriveCoolingOSPower
Crucial MX 100 256GB TR TRUE Rev.A Win 7 Pro x64 Cooler Master V650 
  hide details  
Reply
post #1033 of 1934
biosgpu.zip 197k .zip file

Well really thanks man if u can do that you'll be a savior for me, i attach u two bios, i'm pretty sure they are same, one have just 50mv more than the other. I run actually with no problem at 1160/1625 with +80 mv with a fan profil on msi after burner but msi afterburner let my cg at 0mv offset when starting windows ... even if i use "apply overclocking at system startup" so if you could make a bios with fan profil like 20%-> 45° 50%-> 65° and 100%-> 75° would be great for my configuration 1160/1625 +80mv, really thanks man, i'll buy a second r9 290 in the futur so ,it will be so useful
post #1034 of 1934
Had my card black out under load, SCII
GPU-ZSensorLog-Crash.txt 688k .txt file
Played 2hrs Soild ED last night,
Today opened SCII, had it on windowed in main menu; cata. 15.7 stopped recovered, stopped then froze,
Rebooted, stared SCII again went into campain watched a vidoe, blacksceen,
Rebooted, " " " " " " " " " "


I am flashed to: 290_ELPIDA_STOCK_V1.7.rom, and have no OC open, regedit ULPS to 0,

Report generated on 02/09/16 20:58:05

Card name: AMD Radeon R9 200 Series
GPU: Hawaii
Device Id: 1002-67B1 : 1682-9395
Die Size: 438 mm²
Bus Interface: PCI-E 3.0 x16 @ x8 1.1
Memory Size: 4096 MB
Memory Type: GDDR5
Memory Bus Width: 512 bit
ROPs: 64
Shaders: 2560 Unified / DirectX 12 (12_0)
Driver Version: 15.200.1062.1003 Catalyst 15.7.1
BIOS Version: 015.049.000.000.000000
BIOS Part Number: 113-GRENADA_XT_C671_D5_8GB_HY_W83
UEFI Support: Yes
Clocks: 947 / 1250 MHz


ideas?
Edited by i2CY - 2/10/16 at 6:14pm
post #1035 of 1934
I already used your stock bios on hynix, so ******* nice for temps but i think the voltage is extremely low on the 290_ELPIDA_STOCK_V1.7.rom, so just try to up your offset mv or edit bios, i guess when u have a bug in game you can't boot after that, amd driver bug
Edited by Samuris - 2/11/16 at 4:00am
post #1036 of 1934
Cheers,
will do, yeah had a blackscreen in ED in hour last night, re-boot manual followed up with a Red screen auto reboot.
post #1037 of 1934
I've flashed the "290X_ELPIDA_MOD_V1.7" on my Asus DirectCU ll.

My problems before install.... Everytime I overclock in Win10 + Cimson drivers it would blackscreen at startup and I had to go to - SafeMode & DDU the driver. After installing your BIOS it completely fix my blackscreen issue smile.gif. Temps on my core are down also. 60C under load to 54C. My VRM1 temps a little higher 70C now 75C. I just have to test it a little while longer.

+REP for OP and helpers! smile.gif



P.S. Is something wrong with DESKTOP spoilers & REP? I can't use it in Desktop mode. Using Mobile to use the site sucks.
post #1038 of 1934
xD man you had the same problem than me, which bios you taken ? me for resolve this problem i just flashed a bios with high offset cause the blackscreen is due to too low voltage
post #1039 of 1934
Hello everyone biggrin.gif

I am in the hunt for a BIOS to tighten up my Hynex timings. I recently replaced my old Elpida based R9 290x because it was a bad overclocker and my current one is a beast. My old one the max oc was about 1125 on the core and 1375 on the mem with +150mv in Trixx, my new one does 1200 Core and 1550 Mem with +125mv it is a dream come true. When I had my old card I used a few custom BIOSes for it that tightened up the memory and the performance boost was incredible. I am looking to try it again so if any one has a BIOS they recommend send it on over. My GPU cooking is a Kraken G10, I have an H90 to cool the core in a push pull config, I have the Gelid VRM cooler and VRAM heatsinks on every module so cooling should not be too big of an issue.

Thank you all in advance biggrin.gif
My System
(15 items)
 
  
CPUMotherboardGraphicsRAM
X5660 MS-7543 EVGA GTX 980ti Classified  G.Skill Ripjaw 12GB 
Hard DriveHard DriveCoolingOS
WD 1TB 7,200RPM Samsung 850 EVO 250GB H100i GTX Windows 10 64bit 
PowerCase
XFX 750 Coolermaster Haf 932 
  hide details  
Reply
My System
(15 items)
 
  
CPUMotherboardGraphicsRAM
X5660 MS-7543 EVGA GTX 980ti Classified  G.Skill Ripjaw 12GB 
Hard DriveHard DriveCoolingOS
WD 1TB 7,200RPM Samsung 850 EVO 250GB H100i GTX Windows 10 64bit 
PowerCase
XFX 750 Coolermaster Haf 932 
  hide details  
Reply
post #1040 of 1934
Quote:
Originally Posted by i2CY View Post

ideas?

The ROMs in original post have corrected memory size but not density. I had stability issues when ROM is this way.

ie 290/X and 390/X have 16 chips of RAM but density differs, 64Mx32 denoted by a 43 in VRAM_Info on 290/X and 128Mx32 denoted by 53 in VRAM_Info of 390/X

I have currently modded the 8x 290 ROMs to have:-

- corrected RAM density value
- corrected RAM IC vendor ID & string
- removed the "invisible" +37.5mV VDDC and +31.25mV VDDCI offset present in ROM
- added a "visible" +37.5mV VDDC and +31.25mV VDDCI offset separately

The separated offsets will be editable independently to what a user would want in ROM.

I will hopefully finish the other 290X ROMs today or tomorrow and then perhaps @Insan1tyOne can add the V1.8 ROM pack to OP.

Perhaps this will help your issue.
The Stilt Machine
(14 items)
 
XPS - i5 4690K
(12 items)
 
XPS - Q6600
(8 items)
 
CPUMotherboardGraphicsRAM
Ryzen 7 1700 Asus Crosshair VI Hero Sapphire Fury X@1145/545 G.Skill Trident Z 2x 8GB 3200MHz C14 
Hard DriveCoolingCoolingCooling
Samsung Evo 840 ThermalRight Archon IB-E X2 + 2x TY143 ThermalRight TY-143 2x front case intake Arctic Cooling F12 + 2x F9 as rear case exhaust 
OSMonitorKeyboardPower
Win 7 Pro x64 / Win 10 Pro x64 Asus MG279Q Cherry MX-Board 3.0 Cooler Master V850 
CaseMouse
SilverStone TJ06 Logitech G700S 
CPUMotherboardGraphicsRAM
i5 4690K@4.9GHz 1.255V Asus Maximus VII Ranger Sapphire Fury X@1145/545 HyperX Savage 2x8GB 2400MHz C11 
Hard DriveCoolingOSMonitor
Samsung Evo 840 TR Archon SB-E X2 Win 7 Pro x64 / Win 10 x64 Asus MG279Q 
KeyboardPowerCaseMouse
Cherry MX-Board 3.0 Cooler Master V850 SilverStone TJ06 Logitech G700S 
CPUMotherboardGraphicsRAM
Intel Q6600 G0 Asus P5K Premium Black Pearl Sapphire Toxic HD5850 Corsair Dominator 4GB 
Hard DriveCoolingOSPower
Crucial MX 100 256GB TR TRUE Rev.A Win 7 Pro x64 Cooler Master V650 
  hide details  
Reply
The Stilt Machine
(14 items)
 
XPS - i5 4690K
(12 items)
 
XPS - Q6600
(8 items)
 
CPUMotherboardGraphicsRAM
Ryzen 7 1700 Asus Crosshair VI Hero Sapphire Fury X@1145/545 G.Skill Trident Z 2x 8GB 3200MHz C14 
Hard DriveCoolingCoolingCooling
Samsung Evo 840 ThermalRight Archon IB-E X2 + 2x TY143 ThermalRight TY-143 2x front case intake Arctic Cooling F12 + 2x F9 as rear case exhaust 
OSMonitorKeyboardPower
Win 7 Pro x64 / Win 10 Pro x64 Asus MG279Q Cherry MX-Board 3.0 Cooler Master V850 
CaseMouse
SilverStone TJ06 Logitech G700S 
CPUMotherboardGraphicsRAM
i5 4690K@4.9GHz 1.255V Asus Maximus VII Ranger Sapphire Fury X@1145/545 HyperX Savage 2x8GB 2400MHz C11 
Hard DriveCoolingOSMonitor
Samsung Evo 840 TR Archon SB-E X2 Win 7 Pro x64 / Win 10 x64 Asus MG279Q 
KeyboardPowerCaseMouse
Cherry MX-Board 3.0 Cooler Master V850 SilverStone TJ06 Logitech G700S 
CPUMotherboardGraphicsRAM
Intel Q6600 G0 Asus P5K Premium Black Pearl Sapphire Toxic HD5850 Corsair Dominator 4GB 
Hard DriveCoolingOSPower
Crucial MX 100 256GB TR TRUE Rev.A Win 7 Pro x64 Cooler Master V650 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD/ATI
Overclock.net › Forums › Graphics Cards › AMD/ATI › Modded R9 390X BIOS for R9 290/290X (Updated 02/16/2016)