Originally Posted by SlammiN
Whoa no way thanks for all the info man that's everything I need to know!! Wow!
In regards to a second pump in the same line, is that OK to do?
Yeah it's ok, I just want increase in flow. This is from the Pred manual:
nstalling a typical gPU water block with Quick-Disconnect Couplings
(QDC) typically drop fl ow rates from 135L/h to about 105L/h. Adding two
would result in fl ow rates of 90L/h. not using Quick-Disconnect Couplings
result in fl ow rates of about 125L/h in the same scenario.
Flow rate of 90L/h is considered adequate for successful cooling of the
modern high power GPUs.
I will be adding in a 280 rad and another QDC which would take the flow down pretty low, so that is why I am supplementing with an additional pump. I think it will still cool fine without it though.
My order will be: Pred>CPU>280 Rad>Pump>GPU>Pred. I think it will work out quite nicely, and I should get some good results out of it.