Overclock.net › Forums › Cooling › Water Cooling › New products from Monsoon cooling
New Posts  All Forums:Forum Nav:

New products from Monsoon cooling - Page 353

post #3521 of 4376
Quote:
Originally Posted by rathar3 View Post

I read what i could and they changed the casing size and the shoulder is a different size. Also they say the shaft is longer. If you look at the pump on the Performance Pc page it has 2 reviews both say its does not work with all d5 pumps.

The second one says Looks like contact between impeller and volute during operation. I wont post other reviews here cause i dont remember if we can its in the 3rd page gene near the bottom

If it is a close contact, maybe a thicker O-ring would work?
post #3522 of 4376
Quote:
Originally Posted by DocShay View Post

So I made a dumb mistake - I tightened my new monsoon economy fitting compression piece way to tight over the other part of the fitting. When I went to take it off, the entire fitting came off - How do I go about separating them so I can use it again? (Also, even being that tight - It still leaked. ***. I *think* I made a bend too close inside the fitting, thats the only thing I can think of)

No worries--most of us have done this at least once =)

First, if the tube is still in place, you can try holding the tube with one hand and turning the compression ring with the other (using the wrench).

If the tube is no longer in place there are a few other methods that will work. Which fitting type is it?
post #3523 of 4376
Quote:
Originally Posted by BoxGods View Post

If it is a close contact, maybe a thicker O-ring would work?


UH maybe but not going to try it. Was a nice choice but going with another brand. I am changing my system from soft to hard tube. Color change from blue to UV purple. Got the bending kit already will be getting the rest of the stuff soon. All tubing is monsoon 1/2 x 5/8 petg and going with 1/2 x 5/8 monsoon fittings all purple.

Since i am doing a full rebuild and color change i am going to use the mayhems cleaning system then change all fittings and lines.Ripping my current d5 out is not something i want to do so i was going to get a pump as a backup also as i have a MMRS SAP housing from my blue build.

This way i can remove the rad and clean it good with the mayhems part 1 and not run it thru my system.

I posted that it was a issue with the MMRS SAP as a heads up to you Gene so you knew thumb.gif
Deep Purple
(18 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5 6500 SABERTOOTH Z170 S XFX 480  Corsair 
RAMHard DriveHard DriveHard Drive
Corsair samsung wd  wd 
CoolingCoolingCoolingCooling
EK Supremacy EVO XSPC D5 Vario Pump XSPC RX360 V3 MMRS 50mm MMRS 100mm tubes MMRS D5 pump end MMR... 
CoolingOSMonitorPower
MMRS EV2 1/2x5/8 compression fittings purple 1/... win 10 acer evga 750 g2 
CaseAudio
Thermaltake Core X9 Snow Edition onboard  
  hide details  
Reply
Deep Purple
(18 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5 6500 SABERTOOTH Z170 S XFX 480  Corsair 
RAMHard DriveHard DriveHard Drive
Corsair samsung wd  wd 
CoolingCoolingCoolingCooling
EK Supremacy EVO XSPC D5 Vario Pump XSPC RX360 V3 MMRS 50mm MMRS 100mm tubes MMRS D5 pump end MMR... 
CoolingOSMonitorPower
MMRS EV2 1/2x5/8 compression fittings purple 1/... win 10 acer evga 750 g2 
CaseAudio
Thermaltake Core X9 Snow Edition onboard  
  hide details  
Reply
post #3524 of 4376
Quote:
Originally Posted by BoxGods View Post

No worries--most of us have done this at least once =)

First, if the tube is still in place, you can try holding the tube with one hand and turning the compression ring with the other (using the wrench).

If the tube is no longer in place there are a few other methods that will work. Which fitting type is it?

They are the 1/2" rigid economy fittings. One has a tube in it, I will try the method you mentioned. I have one other that does not have a tube connected still. Ideas for the one with no tube connected?
Derp.
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel Skylake i5 Asus Maximus VIII Asus STRIX 980ti 32gb DDR4 
Hard DriveOptical DriveCoolingOS
SSD x2, Harddisk x3 collecting dust with my VHS player EKWB Supremacy Evo Windows 10 
MonitorMonitorKeyboardPower
Acer Predator X ASUS 29 Logitech G510s Silverstone SFX 600w 
CaseMouseMouse PadAudio
Lian-Li PC-07S Logitech G303 Corsair XXL Razer Leviathan , Logitech G35 
  hide details  
Reply
Derp.
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel Skylake i5 Asus Maximus VIII Asus STRIX 980ti 32gb DDR4 
Hard DriveOptical DriveCoolingOS
SSD x2, Harddisk x3 collecting dust with my VHS player EKWB Supremacy Evo Windows 10 
MonitorMonitorKeyboardPower
Acer Predator X ASUS 29 Logitech G510s Silverstone SFX 600w 
CaseMouseMouse PadAudio
Lian-Li PC-07S Logitech G303 Corsair XXL Razer Leviathan , Logitech G35 
  hide details  
Reply
post #3525 of 4376
@DocShay

Use a piece of painters tape and wrap the collar with it. Then use an Allen key with tape wrapped around it to protect the finish.

This should give you enough surface to grip the collar by hand and back it off the base.

Don't feel bad. I did the same thing with my first box of those fittings and this is how I recovered from my faux pas. thumb.gif

~Ceadder
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
post #3526 of 4376
The best bet is using the supplied wrench on the compression ring, and a hex wrench on the base. Less risk of hurting the finish that way. Any hardware store or Home Depot will have the hex wrench. If you look at the base of the fitting from the bottom you will see where the hex wrench fits.

Option two is to take a short length of scrap tube--about 10mm long--and slice it open so it is no longer a ring. Fit it onto the threads on the bottom of the fitting and use a pair of adjustable pliers--link below so you know the type I mean. Use the larger setting on the pliers and put them onto the tube covered part of the fitting in the round pipe section of the jaws, and the supplied fitting wrench on the compression ring. The soft tube will get damaged but with a little care, the threads on the bottom of the fitting will be fine.

Remember...lefty Lucy, rightie tighty =)

http://toolguyd.com/blog/wp-content/uploads/2014/06/Tekton-USA-Slip-Joint-Pliers.jpg
post #3527 of 4376
SAP will not work with Alphacool Eispumpe VPP755, Someone did try it. Saying it has horrible vibrations. due to how lose it is in the top. I would be more concern it would leak over time. So far theirs only a handful of tops that the pump will work with.

I kept hearing Alphacool Eispumpe VPP755 is not a true D5 pump.
post #3528 of 4376
Quote:
Originally Posted by Revan654 View Post

SAP will not work with Alphacool Eispumpe VPP755, Someone did try it. Saying it has horrible vibrations. due to how lose it is in the top. I would be more concern it would leak over time. So far theirs only a handful of tops that the pump will work with.

I kept hearing Alphacool Eispumpe VPP755 is not a true D5 pump.

Is it a Chinese D5 knock off?
post #3529 of 4376
No, a new pump by alphacool ( like the new swiftech mcp350 or a few others) was made completely in house (by alphacool)
USS CLM8-1701
(39 items)
 
Her Venom
(21 items)
 
Lil Tough Guy
(15 items)
 
CPUMotherboardGraphicsGraphics
AMD FX-8350 Gigabyte 990FXA-UD7 R7970-2PMD3GD5/OC  R7970-2PMD3GD5/OC  
GraphicsGraphicsRAMHard Drive
R7970-2PMD3GD5/OC  R7970-2PMD3GD5/OC  F3-2400C10D-16GTX  OCZ Agility 3 120GB  
Hard DriveHard DriveHard DriveOptical Drive
OCZ Agility 3 120GB  Seagate Barracuda 1TB  Segate Barracuda 3TB Rosewill RCR-IM5001 USB2.0 75 in 1 internal Car... 
Optical DriveCoolingCoolingCooling
Pioneer BDR-208DBK Blu-ray Writer Swiftech H20-220 EDGE HD Liquid Cooling Kit Swiftech Komodo 7970 Swiftech MCP-35X2 
CoolingCoolingCoolingCooling
Swiftech MCP35X2 Heat Sink Swiftech MCP35X Reservoir Swiftech Komodo 7970 Swiftech Komodo 7970 
CoolingCoolingCoolingCooling
Alphacool 240mm XT45 Alphacool 120mm XT45 Alphacool 120mm UT60 FrozenQ PC Mods UV Meteor Light Limited Edition... 
CoolingCoolingOSOS
Koolance Radiator Mounting Bracket with Quick-R... Swiftech Komodo 7970 Windows 7 Windows 8  
MonitorMonitorMonitorMonitor
ASUS VG248QE Black 24" 144Hz 1ms  ASUS VG248QE Black 24" 144Hz 1ms  ASUS VG248QE Black 24" 144Hz 1ms  XFX FXTRISTAND Triple Display Monitor Stand  
KeyboardPowerCaseMouse
Logitech G510 XFX pro 1250w black edition Caselabs MAGNUM M8 Case Razer Naga 
AudioAudioOther
Sony 2.1 Razer Megalodon XFX pro 1250w black edition 
CPUMotherboardGraphicsGraphics
8350 batch 1229 pgn  Asus Crosshair V Formula-Z gigabyte 7770 OC gigabyte 7770 OC 
RAMHard DriveHard DriveHard Drive
F3-2400C10D-16GTX OCZ agaility 3 120  OCZ Agility 3 120gb  Seagate 7200rpm 1tb 
Optical DriveOptical DriveCoolingCooling
Pioneer BDR-208DBK Rosewill RCR-IM5001 USB2.0 75 in 1 internal Car... Swiftech MCP-35X White Top Swiftech Quiet Power 240  
CoolingOSOSMonitor
Swiftech Apogee HD Windows 7 Windows 8 LG E2242 
MonitorKeyboardPowerCase
LG E2242 RAZER Black Lycosa Mirror Special Edition Seasonic x660 Cooler Master Storm Stryker 
Mouse
Razer Lachesis 
CPUMotherboardGraphicsRAM
FX 6100 Sabertooth 990fx R2.0 XFX 7770 Core Edition Samsung 1600 2x4 
RAMHard DriveOptical DriveCooling
Samsung 1600 2x4 Unknown as of now  Piorneer BDR-208DBK Swiftech H220  
OSMonitorKeyboardPower
Windows 8  Samsung 60" 120hz 3d LED TV Unknown Seasonic x750 
CaseMouseAudio
Cooler Master Storm Stryker Unknown Pioneer 5.1 
  hide details  
Reply
USS CLM8-1701
(39 items)
 
Her Venom
(21 items)
 
Lil Tough Guy
(15 items)
 
CPUMotherboardGraphicsGraphics
AMD FX-8350 Gigabyte 990FXA-UD7 R7970-2PMD3GD5/OC  R7970-2PMD3GD5/OC  
GraphicsGraphicsRAMHard Drive
R7970-2PMD3GD5/OC  R7970-2PMD3GD5/OC  F3-2400C10D-16GTX  OCZ Agility 3 120GB  
Hard DriveHard DriveHard DriveOptical Drive
OCZ Agility 3 120GB  Seagate Barracuda 1TB  Segate Barracuda 3TB Rosewill RCR-IM5001 USB2.0 75 in 1 internal Car... 
Optical DriveCoolingCoolingCooling
Pioneer BDR-208DBK Blu-ray Writer Swiftech H20-220 EDGE HD Liquid Cooling Kit Swiftech Komodo 7970 Swiftech MCP-35X2 
CoolingCoolingCoolingCooling
Swiftech MCP35X2 Heat Sink Swiftech MCP35X Reservoir Swiftech Komodo 7970 Swiftech Komodo 7970 
CoolingCoolingCoolingCooling
Alphacool 240mm XT45 Alphacool 120mm XT45 Alphacool 120mm UT60 FrozenQ PC Mods UV Meteor Light Limited Edition... 
CoolingCoolingOSOS
Koolance Radiator Mounting Bracket with Quick-R... Swiftech Komodo 7970 Windows 7 Windows 8  
MonitorMonitorMonitorMonitor
ASUS VG248QE Black 24" 144Hz 1ms  ASUS VG248QE Black 24" 144Hz 1ms  ASUS VG248QE Black 24" 144Hz 1ms  XFX FXTRISTAND Triple Display Monitor Stand  
KeyboardPowerCaseMouse
Logitech G510 XFX pro 1250w black edition Caselabs MAGNUM M8 Case Razer Naga 
AudioAudioOther
Sony 2.1 Razer Megalodon XFX pro 1250w black edition 
CPUMotherboardGraphicsGraphics
8350 batch 1229 pgn  Asus Crosshair V Formula-Z gigabyte 7770 OC gigabyte 7770 OC 
RAMHard DriveHard DriveHard Drive
F3-2400C10D-16GTX OCZ agaility 3 120  OCZ Agility 3 120gb  Seagate 7200rpm 1tb 
Optical DriveOptical DriveCoolingCooling
Pioneer BDR-208DBK Rosewill RCR-IM5001 USB2.0 75 in 1 internal Car... Swiftech MCP-35X White Top Swiftech Quiet Power 240  
CoolingOSOSMonitor
Swiftech Apogee HD Windows 7 Windows 8 LG E2242 
MonitorKeyboardPowerCase
LG E2242 RAZER Black Lycosa Mirror Special Edition Seasonic x660 Cooler Master Storm Stryker 
Mouse
Razer Lachesis 
CPUMotherboardGraphicsRAM
FX 6100 Sabertooth 990fx R2.0 XFX 7770 Core Edition Samsung 1600 2x4 
RAMHard DriveOptical DriveCooling
Samsung 1600 2x4 Unknown as of now  Piorneer BDR-208DBK Swiftech H220  
OSMonitorKeyboardPower
Windows 8  Samsung 60" 120hz 3d LED TV Unknown Seasonic x750 
CaseMouseAudio
Cooler Master Storm Stryker Unknown Pioneer 5.1 
  hide details  
Reply
post #3530 of 4376
Quote:
Originally Posted by Revan654 View Post

SAP will not work with Alphacool Eispumpe VPP755, Someone did try it. Saying it has horrible vibrations. due to how lose it is in the top. I would be more concern it would leak over time. So far theirs only a handful of tops that the pump will work with.

I kept hearing Alphacool Eispumpe VPP755 is not a true D5 pump.


I kinda feel like what you wrote is not exactly what was written and could be misinterpreted.
The pump was actually running very smoothly for a couple of minutes, before it the issue arose and started making the horrible noise.
It was obvious that something went wrong while running and glad I was on hand to switch off the pump and save it from damage.

"Monsoon SAP - sealed well and wet test commenced but after running for ~2 minutes (pump vertical) noise erupted from inside the pump. Looks like contact between impeller and volute during operation, shaft kept spinning and flicked off the white retaining washer and flat washer underneath it. It is possible I did not put impeller retaining washer back on properly, but very unlikely as pump had been in operation for many hours after it was re-assembled following the photo shoot. Has run smoothly for a few hours since the "incident".

The explanation given is what might have happened, it is my best guess as to what went wrong, but now way of knowing for certain.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › New products from Monsoon cooling