Overclock.net › Forums › Graphics Cards › AMD/ATI › Activation of cores in Hawaii, Tonga and Fiji (unlockability tester ver 1.6 and atomtool)
New Posts  All Forums:Forum Nav:

Activation of cores in Hawaii, Tonga and Fiji (unlockability tester ver 1.6 and atomtool) - Page 117

post #1161 of 1392
A wild uneducated guess from me: Recently produced Cards are not unlockable anymore.
AMD might have demanded the board Partners to fully Hardwarelock their chips after they found out that people found a way to unlock their furys.
post #1162 of 1392
MSI R9 390


Adapters detected: 1
Card #1 PCI ID: 1002:67B1 - 1462:2015
DevID [67B1] Rev [80] (0), memory config: 0x500066AA Hynix
Hawaii-class chip with 11 compute units per Shader Engine
SE1 hw/sw: F8010005 / 00000000 [..........x]
SE2 hw/sw: F8010005 / 00000000 [..........x]
SE3 hw/sw: F8010005 / 00000000 [..........x]
SE4 hw/sw: F8010005 / 00000000 [..........x]
40 of 44 CUs are active. HW locks: 4 (R/O) / SW locks: 0 (R/W).
Sorry, all 4 disabled CUs can't be unlocked by BIOS replacement.
post #1163 of 1392
Gigabyte R9 Fury

Adapters detected: 1
Card #1 PCI ID: 1002:7300 - 1458:22C6
DevID [7300] Rev [CB] (0), memory config: 0x00000000 (unused)
Fiji-class chip with 16 compute units per Shader Engine
SE1 hw/sw: 00030000 / 00000000 [..............xx]
SE2 hw/sw: 00210000 / 00000000 [..........x....x]
SE3 hw/sw: 00030000 / 00000000 [..............xx]
SE4 hw/sw: 00030000 / 00000000 [..............xx]
56 of 64 CUs are active. HW locks: 8 (R/W) / SW locks: 0 (R/W).
8 CU's are disabled by HW lock, override is possible at your own risk.

The thing that gets me is amd raptr is picking up my new r9 fury as r9 fury x, I hope i didn't buy a card that was flashed unsuccessfully then returned redface.gif

http://raptr.com/ark-07/about

So will it work for me?
Edited by Ark-07 - 8/11/16 at 1:09am
Current rig
(19 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 6700k overclocked @4.5ghz Gigabyte z170x gaming 7 Msi RX vega 64 16.0GB Dual-Channel DDR4 @3200mhz Gskill Ripjaws V 
Hard DriveHard DriveHard DriveCooling
1863GB Seagate ST2000DM001-1CH164 ATA Device (S... samsung ssd 250gb Seagate st2000dx001 Corsair h105 water cooler 
CoolingCoolingCoolingOS
Coolmaster 120mm 1800rpm fans x 3 Corsair 120mm 1600rpm fan x 3 Thermaltake 140mm 1600rpm x 2 WIndows 10 64bit 
MonitorMonitorKeyboardPower
LG LG 34UM68 BenQ XL2720Z logitch mk700 Corsair Tx850m 
CaseMouseAudio
Corsair c70 Vengeance logitch mk700 Motherboard Sound Chip Sound blaster 
  hide details  
Reply
Current rig
(19 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 6700k overclocked @4.5ghz Gigabyte z170x gaming 7 Msi RX vega 64 16.0GB Dual-Channel DDR4 @3200mhz Gskill Ripjaws V 
Hard DriveHard DriveHard DriveCooling
1863GB Seagate ST2000DM001-1CH164 ATA Device (S... samsung ssd 250gb Seagate st2000dx001 Corsair h105 water cooler 
CoolingCoolingCoolingOS
Coolmaster 120mm 1800rpm fans x 3 Corsair 120mm 1600rpm fan x 3 Thermaltake 140mm 1600rpm x 2 WIndows 10 64bit 
MonitorMonitorKeyboardPower
LG LG 34UM68 BenQ XL2720Z logitch mk700 Corsair Tx850m 
CaseMouseAudio
Corsair c70 Vengeance logitch mk700 Motherboard Sound Chip Sound blaster 
  hide details  
Reply
post #1164 of 1392
If it's locked and you flash it, nothing happens, at least nothing happened to mine.
post #1165 of 1392
Hi everyone! First time poster here! biggrin.gif

I just unlocked my R9 Fury Strix to 60 CU's thank you guys for such a great work!

post #1166 of 1392
Quote:
Originally Posted by Richi3 View Post

A wild uneducated guess from me: Recently produced Cards are not unlockable anymore.
AMD might have demanded the board Partners to fully Hardwarelock their chips after they found out that people found a way to unlock their furys.

hard locks should be done by AMD, no? board partners just put on the chip. AMD and whoever they contract laser cuts the chips
Quote:
Adapters detected: 1
Card #1 PCI ID: 1002:7300 - 1043:049E
DevID [7300] Rev [CB] (0), memory config: 0x00000000 (unused)
Fiji-class chip with 16 compute units per Shader Engine
SE1 hw/sw: 00030000 / 00000000 [..............xx]
SE2 hw/sw: 00030000 / 00000000 [..............xx]
SE3 hw/sw: 00030000 / 00000000 [..............xx]
SE4 hw/sw: 00030000 / 00000000 [..............xx]
56 of 64 CUs are active. HW locks: 8 (R/W) / SW locks: 0 (R/W).
8 CU's are disabled by HW lock, override is possible at your own risk.

Should I try? Strix bought around january/feb
post #1167 of 1392
Quote:
Originally Posted by semitope View Post

hard locks should be done by AMD, no? board partners just put on the chip. AMD and whoever they contract laser cuts the chips
Should I try? Strix bought around january/feb

This looks quite good for a full unlock, however procede carefully, the Fury Strix does not have a bios switch :/ Out of curiosity, what is your ASIC quality? Mine is 60%.

Regards,
u3a6
post #1168 of 1392
Quote:
Originally Posted by semitope View Post

hard locks should be done by AMD, no? board partners just put on the chip. AMD and whoever they contract laser cuts the chips
Should I try? Strix bought around january/feb

Youre Right.. Hard locks are probably done by AMD.
But I would say go for it if your confidint in what you are doing. Only Problem is that Strixes dont have Backup BIOSes.. :/

Quote:
Originally Posted by u3a6 View Post

This looks quite good for a full unlock, however procede carefully, the Fury Strix does not have a bios switch :/ Out of curiosity, what is your ASIC quality? Mine is 60%.

Regards,
u3a6

ASIC quality of 55.7% here.. My card is quite bad at overclocking too. Seems that ASIC quality has something to do with Overclockabilty...
1060 MHz on Stock Voltage (1.25V effective 1.215V under load) with Stock Fan Profile.. More is just not possible..


And.. It has some weird Monitor Flickering under Displayport, which goes away when I plug HDMI into the Card and the exact same Monitor...
Edited by Richi3 - 8/11/16 at 9:32am
post #1169 of 1392
Quote:
Originally Posted by u3a6 View Post

This looks quite good for a full unlock, however procede carefully, the Fury Strix does not have a bios switch :/ Out of curiosity, what is your ASIC quality? Mine is 60%.

Regards,
u3a6

ASIC quality 60.4%

playing around with undervolting it. hit and miss. ashes of the singularity in particular can hard crash the system with undervolt. Other games seem to work with around -54mv . Haven't tried OC yet.

worried about the lack of dual bios. With all the fancy features they put on the board, one would think they could at least do dual bios. Seems important...
post #1170 of 1392
Quote:
Originally Posted by semitope View Post


worried about the lack of dual bios. With all the fancy features they put on the board, one would think they could at least do dual bios. Seems important...

If you have some kind of onboard Graphics, or a second Graphicscard, it should be possible to recover the Card if anything goes wrong..
But dont quote me on that biggrin.gif
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD/ATI
Overclock.net › Forums › Graphics Cards › AMD/ATI › Activation of cores in Hawaii, Tonga and Fiji (unlockability tester ver 1.6 and atomtool)