Overclock.net › Forums › Graphics Cards › AMD/ATI › Activation of cores in Hawaii, Tonga and Fiji (unlockability tester ver 1.6 and atomtool)
New Posts  All Forums:Forum Nav:

Activation of cores in Hawaii, Tonga and Fiji (unlockability tester ver 1.6 and atomtool) - Page 8

post #71 of 1392
Alright, looks like mine is not suitable for unlock. I get artifacts with _all and either 57 or 59 CU with _high and _low.
post #72 of 1392
Quote:
Originally Posted by Scorpion49 View Post

Sapphire Fury Tri-X:

Adapters detected: 1
Card #1 PCI ID: 1002:7300 - 174B:E329
DevID [7300] Rev [CB] (0), memory config: 0x00000000 (unused)
Fiji-class chip with 16 compute units per Shader Engine
SE1 hw/sw: 04080000 / 00000000 [.....x......x...]
SE2 hw/sw: 00050000 / 00000000 [.............x.x]
SE3 hw/sw: 02010000 / 00000000 [......x........x]
SE4 hw/sw: 00030000 / 00000000 [..............xx]
56 of 64 CUs are active. HW locks: 8 (R/W) / SW locks: 0 (R/W).
8 CU's are disabled by HW lock, override is possible at your own risk.

Yeah, yours are pretty random on all accounts. I am going to try high and see what mine does, I may even try dropping clocks depending on what happens.
D
(15 items)
 
The Sheep Skinner
(13 items)
 
 
CPUMotherboardGraphicsRAM
Intel i7 6700 Gigabyte Z170N-Gaming5 Sapphire Radeon R9 Fury Tri-X 3840 G.Skill TridentZ  
Hard DriveCoolingCoolingCooling
960 EVO 500GB EK SE 240mm, Magicool slim 240mm EK Supreme HF CU Gold EKFC-Fury X WB 
OSMonitorPowerCase
Win 10 Pro Acer XG270HU EVGA 750W  Evolv ITX 
MouseMouse Pad
Naos7000 Corsair MM600 
CPUMotherboardGraphicsRAM
C2D E8400 DFI LT P35 Radeon HD4890 OCZ 2GB 800MHz 
Hard DriveOptical DriveOSMonitor
500GB Asus multi DVD W7 U Samsung 2232BW+ 
PowerCase
Corsair HX520W CM 690 
  hide details  
Reply
D
(15 items)
 
The Sheep Skinner
(13 items)
 
 
CPUMotherboardGraphicsRAM
Intel i7 6700 Gigabyte Z170N-Gaming5 Sapphire Radeon R9 Fury Tri-X 3840 G.Skill TridentZ  
Hard DriveCoolingCoolingCooling
960 EVO 500GB EK SE 240mm, Magicool slim 240mm EK Supreme HF CU Gold EKFC-Fury X WB 
OSMonitorPowerCase
Win 10 Pro Acer XG270HU EVGA 750W  Evolv ITX 
MouseMouse Pad
Naos7000 Corsair MM600 
CPUMotherboardGraphicsRAM
C2D E8400 DFI LT P35 Radeon HD4890 OCZ 2GB 800MHz 
Hard DriveOptical DriveOSMonitor
500GB Asus multi DVD W7 U Samsung 2232BW+ 
PowerCase
Corsair HX520W CM 690 
  hide details  
Reply
post #73 of 1392
Quote:
Originally Posted by rx7racer View Post

Yeah, yours are pretty random on all accounts. I am going to try high and see what mine does, I may even try dropping clocks depending on what happens.

Well, I think I'll leave it as-is. I'm guessing the two in the middle are the bad ones that caused this to be a Fiji Pro bin, so _low gives me the three from the last row which means 3 out of 4 SE have only 1 disabled CU. My performance in firestrike goes up by ~3% vs the stock bios switch so its something for free.
post #74 of 1392
Has anyone done a hard shutdown after modding the bios, my pc keeps hanging on boot, something about PCH initialization errors with the card powered up.

I had no issue restarting several times, kind of confused as to why there would be an issue now.
Steins Gate
(17 items)
 
  
CPUMotherboardGraphicsRAM
i7 7800x @ TBD ASRock OC Formula X299 XFX Vega 64 4x4 Crucial Ballistix Elite @ TBD 
Hard DriveHard DriveHard DriveCooling
960 Evo 850 Evo WD Blue 1TB Thermalright True Spirit 140 Direct 
MonitorKeyboardPowerCase
Acer XR342CK G413 EVGA 750w G2 CM MC5 
MouseMouse PadAudioAudio
G703 Logitech Powerplay Onboard Logitech Z906 
Audio
HD518 
  hide details  
Reply
Steins Gate
(17 items)
 
  
CPUMotherboardGraphicsRAM
i7 7800x @ TBD ASRock OC Formula X299 XFX Vega 64 4x4 Crucial Ballistix Elite @ TBD 
Hard DriveHard DriveHard DriveCooling
960 Evo 850 Evo WD Blue 1TB Thermalright True Spirit 140 Direct 
MonitorKeyboardPowerCase
Acer XR342CK G413 EVGA 750w G2 CM MC5 
MouseMouse PadAudioAudio
G703 Logitech Powerplay Onboard Logitech Z906 
Audio
HD518 
  hide details  
Reply
post #75 of 1392
Thread Starter 
Quote:
Originally Posted by rv8000 View Post

Has anyone done a hard shutdown after modding the bios, my pc keeps hanging on boot, something about PCH initialization errors with the card powered up.

I had no issue restarting several times, kind of confused as to why there would be an issue now.
That's strange. In the case of any confusion, power off, flip bios switch and try to boot.
If the problem persists it may not be related to bios mod.
Always keep that second switch position with the default safe bios.
post #76 of 1392
Quote:
Originally Posted by tx12 View Post

That's strange. In the case of any confusion, power off, flip bios switch and try to boot.
If the problem persists it may not be related to bios mod.
Always keep that second switch position with the default safe bios.

Are gpu drivers initiallized during bios boot?
Steins Gate
(17 items)
 
  
CPUMotherboardGraphicsRAM
i7 7800x @ TBD ASRock OC Formula X299 XFX Vega 64 4x4 Crucial Ballistix Elite @ TBD 
Hard DriveHard DriveHard DriveCooling
960 Evo 850 Evo WD Blue 1TB Thermalright True Spirit 140 Direct 
MonitorKeyboardPowerCase
Acer XR342CK G413 EVGA 750w G2 CM MC5 
MouseMouse PadAudioAudio
G703 Logitech Powerplay Onboard Logitech Z906 
Audio
HD518 
  hide details  
Reply
Steins Gate
(17 items)
 
  
CPUMotherboardGraphicsRAM
i7 7800x @ TBD ASRock OC Formula X299 XFX Vega 64 4x4 Crucial Ballistix Elite @ TBD 
Hard DriveHard DriveHard DriveCooling
960 Evo 850 Evo WD Blue 1TB Thermalright True Spirit 140 Direct 
MonitorKeyboardPowerCase
Acer XR342CK G413 EVGA 750w G2 CM MC5 
MouseMouse PadAudioAudio
G703 Logitech Powerplay Onboard Logitech Z906 
Audio
HD518 
  hide details  
Reply
post #77 of 1392
Thread Starter 
Quote:
Originally Posted by rv8000 View Post

Are gpu drivers initiallized during bios boot?
Kind of. Small driver initializes the card to be able to show boot up picture. If your system went unstable effects may wary with legacy and uefi boots.
However, it shouldn't give you PCH errors, but who knows. Flip to the safe bios to check that's went wrong.
Giving a system a hard reboot or power cycle after bios update is always the good idea.
post #78 of 1392
Thread Starter 
Quote:
Originally Posted by PEJUman View Post

However GPU-z failed to show any shader increase, I tested both 4low and all. Both still says 3584 under GPU-z. I wonder what went wrong here...
Be sure to hard reset or power cycle after bios update.
Run cuinfo to see what's happened.
post #79 of 1392
Quote:
Originally Posted by tx12 View Post

Kind of. Small driver initializes the card to be able to show boot up picture. If your system went unstable effects may wary with legacy and uefi boots.
However, it shouldn't give you PCH errors, but who knows. Flip to the safe bios to check that's went wrong.
Giving a system a hard reboot or power cycle after bios update is always the good idea.

Seems like the card may have bit the dust. After reflashing the stock bios, I'm still getting the PCH initialization error code for either bios. I couldn't even boot with integrated I had to grab my 7970 to flash the Fury. I'll have to check the card in another PC as soon as one is freed up around the house. I'm still fairly confused as to how something would go wrong after multiple restarts and having no issue, as even on a restart motherboard seems to go through the same boot cycle according to the post code sequence.
Steins Gate
(17 items)
 
  
CPUMotherboardGraphicsRAM
i7 7800x @ TBD ASRock OC Formula X299 XFX Vega 64 4x4 Crucial Ballistix Elite @ TBD 
Hard DriveHard DriveHard DriveCooling
960 Evo 850 Evo WD Blue 1TB Thermalright True Spirit 140 Direct 
MonitorKeyboardPowerCase
Acer XR342CK G413 EVGA 750w G2 CM MC5 
MouseMouse PadAudioAudio
G703 Logitech Powerplay Onboard Logitech Z906 
Audio
HD518 
  hide details  
Reply
Steins Gate
(17 items)
 
  
CPUMotherboardGraphicsRAM
i7 7800x @ TBD ASRock OC Formula X299 XFX Vega 64 4x4 Crucial Ballistix Elite @ TBD 
Hard DriveHard DriveHard DriveCooling
960 Evo 850 Evo WD Blue 1TB Thermalright True Spirit 140 Direct 
MonitorKeyboardPowerCase
Acer XR342CK G413 EVGA 750w G2 CM MC5 
MouseMouse PadAudioAudio
G703 Logitech Powerplay Onboard Logitech Z906 
Audio
HD518 
  hide details  
Reply
post #80 of 1392
Thread Starter 
Quote:
Originally Posted by rv8000 View Post

Seems like the card may have bit the dust. After reflashing the stock bios, I'm still getting the PCH initialization error code for either bios.

Hmm, that sounds pretty alarming. I'm not sure if its possible to ruin the card with unlock, but I can't remember any incidents with R290's.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD/ATI
Overclock.net › Forums › Graphics Cards › AMD/ATI › Activation of cores in Hawaii, Tonga and Fiji (unlockability tester ver 1.6 and atomtool)