Overclock.net › Forums › Intel › Intel Motherboards › [Official] ASUS Z10PE-D8 WS Owner's thread
New Posts  All Forums:Forum Nav:

[Official] ASUS Z10PE-D8 WS Owner's thread - Page 41

post #401 of 670
Quote:
Originally Posted by smithft View Post

What kind of numbers are you getting?

With Valley at 3440x1440, no AA I got a score of 3,330.....
post #402 of 670
Thanks.
Quote:
Originally Posted by smithft View Post

This is what I am getting from disk mark for the samsung 950 m.2 through the M.2 connection. These are somewhat slower than other posted benchmarks than what I have seen posted. For example here
http://www.legitreviews.com/samsung-ssd-950-pro-512gb-nvme-pcie-ssd-review_174096/4

My results:
crystal
CrystalDiskMark 5.1.2 x64 (C) 2007-2016 hiyohiyo
Crystal Dew World : http://crystalmark.info/
* MB/s = 1,000,000 bytes/s [SATA/600 = 600,000,000 bytes/s]
* KB = 1000 bytes, KiB = 1024 bytes

Sequential Read (Q= 32,T= 1) : 1950.656 MB/s
Sequential Write (Q= 32,T= 1) : 936.303 MB/s
Random Read 4KiB (Q= 32,T= 1) : 515.441 MB/s [125840.1 IOPS]
Random Write 4KiB (Q= 32,T= 1) : 314.457 MB/s [ 76771.7 IOPS]
Sequential Read (T= 1) : 1710.766 MB/s
Sequential Write (T= 1) : 942.499 MB/s
Random Read 4KiB (Q= 1,T= 1) : 47.603 MB/s [ 11621.8 IOPS]
Random Write 4KiB (Q= 1,T= 1) : 154.355 MB/s [ 37684.3 IOPS]

Test : 1024 MiB [C: 72.5% (172.8/238.4 GiB)] (x5) [Interval=5 sec]
Date : 2016/07/18 10:17:25
OS : Windows 10 Enterprise [10.0 Build 10240] (x64)
post #403 of 670
I have z10pe-d16 + 2x xeon e5-2683 v3 es +32gb ddr4 ecc reg rams,
My problem in temperature of motherbord 104•c:mad:
CPUs temperature 35•c:)
Rams temperature 35•c:)

Why's the motherboard is 104•c !!!!!!mad.gif
Am using ((Speccy ))
And many programs same result.
Can anyone check this place?
post #404 of 670
Hello everyone. Just a question. When i run my CPU in a single socket board R5E i get 3.3Ghz but in this board i only get 3.1Ghz. Is there a way to set the multiplier in this board as i can't find the setting for it anywhere. Cpu is a E5-2666v3 BTW.

Is there any way to change the memory timming? Also i can't make the memory frequency stick. Always just goes back to default.
Edited by Heratic - 7/28/16 at 8:45pm
post #405 of 670
HI all.
I am recent owner of this board (actually the D16 WS model) along with dual Xeon E5-2630V4 cpus. Additionally I have installed an Intel 750 1.2TB SSD and a STRIX GTX1070.
My problem is that I cannot get normal 4K SSD performance.
In the previous motherboard that I had the Intel 750, I had around 33MB/s read and 170MB/s write 4K performance in AS SSD benchmark.
After moving the drive to the new motherboard with the dual Xeons, I only get 29MB/s read and 100MB/s write.
The OS is the same in both configurations (Windows 10 Enterprise) with the same firmware and driver for the Intel 750. I am pretty sure that this is because of a power feature in the BIOS (like C-states) but anything that I have changed didn't make any difference.

Any thoughts on which might be the settings for the CPU's in the BIOS that will boost the 4K performance back to normal?

Thanks in advance for your time.
post #406 of 670
Does anyone know if the Z9PE-D8 ek motherboard waterblocks will fit the Z10PE-D8
post #407 of 670
Quote:
Originally Posted by nullReal View Post

hi! I have just bought one of this fantastic motherboards (but in the d16 version) smile.gif but I cannot make the m.2 slot works at x4 speed with the Samsung 950 Pro 512gb :mad:I installed the nvme drivers from samsung's site and it´s still not working at x4, the read speed is about 860 only mad.gif Could you help me please? frown.gif

Thanks and sorry for my poor english
I don't know if you found and answer to your question yet or not, but the reason you are seeing slower speeds with an M.2 drive in the M.2 slot on the D16 version of this board is that it uses a slower PCIe interface. On this board (D8) the M.2 slot uses PCIe 3.0 x4 interface, whereas the D16 board uses PCIe 2.0 x2 - which is about half the speed. The only way to get the full speed out of that drive on the D16 board is to purchase a PCIe adapter and install it into one of the PCIe 3.0 x16 slots.
post #408 of 670
Does anyone know if I would be able to use DDR4-2666 (PC4-12800R) ECC/REG memory in this board? I know with typical desktop boards you can install RAM that is faster than what the motherboard or CPU is capable or (i.e. installing DDR3-1600 on a board which maxes out at DDR3-1333), and it will automatically downclock the RAM speed to match what the mobo and CPU(s) can handle. Is that the case with a server board like this, too? Looking at the specs of this board the highest memory speed is listed at 2133Mhz, yet in the QVL memory list there are several sticks listed which are DDR-2400 ECC/REG. I obviously realize that the DDR4-2666 sticks won't run at 2666Mhz, but I'm curious if they will still work and simply be downclocked to 2133Mhz?
post #409 of 670
Quote:
Originally Posted by jleonard711 View Post

Does anyone know if I would be able to use DDR4-2666 (PC4-12800R) ECC/REG memory in this board? I know with typical desktop boards you can install RAM that is faster than what the motherboard or CPU is capable or (i.e. installing DDR3-1600 on a board which maxes out at DDR3-1333), and it will automatically downclock the RAM speed to match what the mobo and CPU(s) can handle. Is that the case with a server board like this, too? Looking at the specs of this board the highest memory speed is listed at 2133Mhz, yet in the QVL memory list there are several sticks listed which are DDR-2400 ECC/REG. I obviously realize that the DDR4-2666 sticks won't run at 2666Mhz, but I'm curious if they will still work and simply be downclocked to 2133Mhz?


It will just run at the speed specified by the processor. 2133 for haswell and 2400 for broadwell.
post #410 of 670
Hi hi ! I have a quick, and certainly stupid question...

Is it possible/safe to power on the mobo without CPU ? And if so, will I have some interesting informations about its health ?

Here is why : I'm waiting for my CPUs to come for a month now, but I would like to test my mobo before to get my processors to avoid THE bad surprise...

Here is my setup : I only connected my PSU, my case fans and front panel, USB3, one DVD drive, and already installed my 2 RAM Sticks (one on slot A1, the other on slot E1, as the instruction says).

Thanks !

[EDIT] Nevermind, received my CPUs, everything works great.
Edited by KFix - 9/28/16 at 4:35am
3D Workstation
(18 items)
 
  
CPUCPUMotherboardGraphics
E5-2683 v3 E5-2683 v3 ASUS Z10PE-D8 WS nVidia Quadro K4000 
RAMRAMHard DriveOptical Drive
Kingston DDR4 2133Mhz ECC REG Kingston DDR4 2133Mhz ECC REG Samsung EVO PRO SSD Asus DVD 
CoolingCoolingOSMonitor
Noctua NH-U12S Noctua NH-U12S W10 pro Prolite XB2483HSU 
KeyboardPowerCaseMouse
Crap Corsair HXi850W Platinium  Phanteks Enthoo Luxe Corsair Sabre RGB 
Mouse PadAudio
Mionix Sargas M AKG K 272 HD 
  hide details  
Reply
3D Workstation
(18 items)
 
  
CPUCPUMotherboardGraphics
E5-2683 v3 E5-2683 v3 ASUS Z10PE-D8 WS nVidia Quadro K4000 
RAMRAMHard DriveOptical Drive
Kingston DDR4 2133Mhz ECC REG Kingston DDR4 2133Mhz ECC REG Samsung EVO PRO SSD Asus DVD 
CoolingCoolingOSMonitor
Noctua NH-U12S Noctua NH-U12S W10 pro Prolite XB2483HSU 
KeyboardPowerCaseMouse
Crap Corsair HXi850W Platinium  Phanteks Enthoo Luxe Corsair Sabre RGB 
Mouse PadAudio
Mionix Sargas M AKG K 272 HD 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › [Official] ASUS Z10PE-D8 WS Owner's thread