Originally Posted by WIGILOCO
Will let prime run overnight I guess.
Put cache to 4Ghz.
Why..? Do you search for Prime numbers, you've already done a fairly good stress test with BF3/BF4 and as long as you've thrown in the latest x264 from here and/or RealBench then you're good to go. Don't drop cache now, you don't want to raise it higher than it naturally wants to run as then you'll just compensate via vcore. eg, anything over x45 for me wants more vcore, I'm happy to leave it there instead of raising vcore.
Originally Posted by ChilledNineball
If I set adaptive voltage at 1.35v+0.01 and run Prime95 (small FFT), my VID hangs around 1.4 and my temperatures are about 8 degrees higher than when I run in manual voltage mode.
You don't mention you setting LLC here, did you? LLC5 should raise it ~0.02v while if you used LLC4 it should be similar to what you set, eg; 1.35v (hwinfo vcore reading, not VID).