Overclock.net › Forums › Intel › Intel CPUs › Skylake Overclocking Guide [With Statistics]
New Posts  All Forums:Forum Nav:

Skylake Overclocking Guide [With Statistics] - Page 784

post #7831 of 11361
I am not wanting to be argumentative, but I am certain HWinfo is incorrect.

I am confident AIDA64 is much more accurate than HWinfo.



hwinfo%20vs.%20aida64%206-27-16.jpg

VCore in BIOS is set at 1.335V.

EDIT: picture text is too small, damn resizing.

HWinfo says 1.252V. AIDA64 says 1.3221V.
Edited by Arctucas - 6/27/16 at 3:47pm
PC
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-6700K eVGA Classified K eVGA GTX970SSC G.Skill F4-3600C16-16GTZ 
Hard DriveOptical DriveCoolingOS
2x Samsung 960 EVO M.2 RAID0 Samsung SH-S223L Custom Loop D5 Vario, Thermochill PA140.3, Heat... W7 U SP1 x64 
MonitorKeyboardPowerCase
Viewsonic VX2770 Logitech Corsair AX1200, APC RS1500 LCD Thermaltake VG4000SNA  
Mouse
Logitech 
  hide details  
Reply
PC
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-6700K eVGA Classified K eVGA GTX970SSC G.Skill F4-3600C16-16GTZ 
Hard DriveOptical DriveCoolingOS
2x Samsung 960 EVO M.2 RAID0 Samsung SH-S223L Custom Loop D5 Vario, Thermochill PA140.3, Heat... W7 U SP1 x64 
MonitorKeyboardPowerCase
Viewsonic VX2770 Logitech Corsair AX1200, APC RS1500 LCD Thermaltake VG4000SNA  
Mouse
Logitech 
  hide details  
Reply
post #7832 of 11361
Quote:
Originally Posted by Arctucas View Post

I am not wanting to be argumentative, but I am certain HWinfo is incorrect.

I am confident AIDA64 is much more accurate than HWinfo.


Warning: Spoiler! (Click to show)
hwinfo%20vs.%20aida64%206-27-16.jpg

VCore in BIOS is set at 1.335V.

EDIT: picture text is too small, damn resizing.

HWinfo says 1.250V. AIDA64 says 1.3280V.
It's not unusual for two programs polling temps/voltages at the same time to not be in sync.
Having said that, I've never had any problems with HWINFO showing correct values. If there is a problem, contact the author, he's quick to fix any discrepancies that show up for various motherboards.
post #7833 of 11361
anyone familiar with bsod 7f? I encountered it 45 mins into realbench stress test

temps under 70c
Code55
(14 items)
 
  
CPUMotherboardGraphicsRAM
i7-6700k 4.8 Asus Impact VIII / EK M8i Monoblock SeaHawk EK X 1080 Ti G.Skill Ripjaw V 2 x 16GB 3733CL15 1T 
Hard DriveHard DriveCoolingMonitor
INTEL 750 400GB U.2 SanDisk Extreme Pro 960GB EK D5 PWM Acer X34A 
KeyboardPowerCaseAudio
Logitech G810 EVGA 750 G2 In-Win D-Frame Mini Meridian Explorer 
  hide details  
Reply
Code55
(14 items)
 
  
CPUMotherboardGraphicsRAM
i7-6700k 4.8 Asus Impact VIII / EK M8i Monoblock SeaHawk EK X 1080 Ti G.Skill Ripjaw V 2 x 16GB 3733CL15 1T 
Hard DriveHard DriveCoolingMonitor
INTEL 750 400GB U.2 SanDisk Extreme Pro 960GB EK D5 PWM Acer X34A 
KeyboardPowerCaseAudio
Logitech G810 EVGA 750 G2 In-Win D-Frame Mini Meridian Explorer 
  hide details  
Reply
post #7834 of 11361
Quote:
Originally Posted by superkyle1721 View Post

You can leave the power settings enabled just increase Vcore and multiplier.


Always destroying exergy

Thanks - from what I've read so far:

- Just adjust vcore and multiplier
- Leave CPU power settings as default
- What about the turbo ? Do I disable Turbo if I'm overclocking to 4.6 Ghz ? Coz right now it's fluctuating from 4.0 - 4.2 Ghz at stock

I hope my batch L606F380 is good for OC/Volts. Will report back

As far as I understand, usually the first batches (for example 2015) are the more "sought" after ones, or is that not true ? Mine's from 2016 week 6
Edited by chiggah - 6/27/16 at 5:09pm
Skylake i7
(14 items)
 
  
CPUMotherboardGraphicsRAM
i7 6700K @ 4.6 Ghz 1.35v Asus Z170 Pro Gaming ASUS GTX 980 Ti STRIX Gaming 6 GB Kingston HyperX Fury 16GB (2 x 8GB) DDR4 2400MHz 
Hard DriveCoolingPowerCase
Samsung 850 PRO 250GB Corsair H110 EVGA SuperNova G2 1000W Fractal R5 
  hide details  
Reply
Skylake i7
(14 items)
 
  
CPUMotherboardGraphicsRAM
i7 6700K @ 4.6 Ghz 1.35v Asus Z170 Pro Gaming ASUS GTX 980 Ti STRIX Gaming 6 GB Kingston HyperX Fury 16GB (2 x 8GB) DDR4 2400MHz 
Hard DriveCoolingPowerCase
Samsung 850 PRO 250GB Corsair H110 EVGA SuperNova G2 1000W Fractal R5 
  hide details  
Reply
post #7835 of 11361
Quote:
Originally Posted by chiggah View Post

Thanks - from what I've read so far:

- Just adjust vcore and multiplier
- Leave CPU power settings as default
- What about the turbo ? Do I disable Turbo if I'm overclocking to 4.6 Ghz ? Coz right now it's fluctuating from 4.0 - 4.2 Ghz at stock

I hope my batch L606F380 is good for OC/Volts. Will report back

As far as I understand, usually the first batches (for example 2015) are the more "sought" after ones, or is that not true ? Mine's from 2016 week 6


only one way to find out smile.gif
Code55
(14 items)
 
  
CPUMotherboardGraphicsRAM
i7-6700k 4.8 Asus Impact VIII / EK M8i Monoblock SeaHawk EK X 1080 Ti G.Skill Ripjaw V 2 x 16GB 3733CL15 1T 
Hard DriveHard DriveCoolingMonitor
INTEL 750 400GB U.2 SanDisk Extreme Pro 960GB EK D5 PWM Acer X34A 
KeyboardPowerCaseAudio
Logitech G810 EVGA 750 G2 In-Win D-Frame Mini Meridian Explorer 
  hide details  
Reply
Code55
(14 items)
 
  
CPUMotherboardGraphicsRAM
i7-6700k 4.8 Asus Impact VIII / EK M8i Monoblock SeaHawk EK X 1080 Ti G.Skill Ripjaw V 2 x 16GB 3733CL15 1T 
Hard DriveHard DriveCoolingMonitor
INTEL 750 400GB U.2 SanDisk Extreme Pro 960GB EK D5 PWM Acer X34A 
KeyboardPowerCaseAudio
Logitech G810 EVGA 750 G2 In-Win D-Frame Mini Meridian Explorer 
  hide details  
Reply
post #7836 of 11361
Quote:
Originally Posted by mandrix View Post

It's not unusual for two programs polling temps/voltages at the same time to not be in sync.
Having said that, I've never had any problems with HWINFO showing correct values. If there is a problem, contact the author, he's quick to fix any discrepancies that show up for various motherboards.

I understand the thing about possible issues when using two polling applications simultaneously, but HWinfo always reports the wrong voltage, even when it is used by itself.

I had to submit sensor dumps to FinalWire to get AIDA64 updated to correctly read the voltage. Out-of-the-box, only ELEET would read the voltage correctly.

However, if HWinfo is the only acceptable option...I suppose I can try to contact the author to get HWinfo updated, but frankly, I like AIDA64 so much better.
Edited by Arctucas - 7/1/16 at 4:45pm
PC
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-6700K eVGA Classified K eVGA GTX970SSC G.Skill F4-3600C16-16GTZ 
Hard DriveOptical DriveCoolingOS
2x Samsung 960 EVO M.2 RAID0 Samsung SH-S223L Custom Loop D5 Vario, Thermochill PA140.3, Heat... W7 U SP1 x64 
MonitorKeyboardPowerCase
Viewsonic VX2770 Logitech Corsair AX1200, APC RS1500 LCD Thermaltake VG4000SNA  
Mouse
Logitech 
  hide details  
Reply
PC
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-6700K eVGA Classified K eVGA GTX970SSC G.Skill F4-3600C16-16GTZ 
Hard DriveOptical DriveCoolingOS
2x Samsung 960 EVO M.2 RAID0 Samsung SH-S223L Custom Loop D5 Vario, Thermochill PA140.3, Heat... W7 U SP1 x64 
MonitorKeyboardPowerCase
Viewsonic VX2770 Logitech Corsair AX1200, APC RS1500 LCD Thermaltake VG4000SNA  
Mouse
Logitech 
  hide details  
Reply
post #7837 of 11361
Quote:
Originally Posted by Asus11 View Post

anyone familiar with bsod 7f? I encountered it 45 mins into realbench stress test

temps under 70c

STOP 0x0000007F: UNEXPECTED_KERNEL_MODE_TRAP

Usual causes: Memory corruption, Hardware (memory in particular), Overclocking failure, Installing a faulty or mismatched hardware (especially memory) or a failure after installing it, 3rd party firewall, Device drivers, SCSI/network/BIOS updates needed, Improperly seated cards, Incompatible storage devices, Overclocking, Virus scanner, Backup tool, Bad motherboard, Missing Service Pack

Excerpted from BSOD Index @ carrona.org.
Edited by Arctucas - 6/28/16 at 6:51am
PC
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-6700K eVGA Classified K eVGA GTX970SSC G.Skill F4-3600C16-16GTZ 
Hard DriveOptical DriveCoolingOS
2x Samsung 960 EVO M.2 RAID0 Samsung SH-S223L Custom Loop D5 Vario, Thermochill PA140.3, Heat... W7 U SP1 x64 
MonitorKeyboardPowerCase
Viewsonic VX2770 Logitech Corsair AX1200, APC RS1500 LCD Thermaltake VG4000SNA  
Mouse
Logitech 
  hide details  
Reply
PC
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-6700K eVGA Classified K eVGA GTX970SSC G.Skill F4-3600C16-16GTZ 
Hard DriveOptical DriveCoolingOS
2x Samsung 960 EVO M.2 RAID0 Samsung SH-S223L Custom Loop D5 Vario, Thermochill PA140.3, Heat... W7 U SP1 x64 
MonitorKeyboardPowerCase
Viewsonic VX2770 Logitech Corsair AX1200, APC RS1500 LCD Thermaltake VG4000SNA  
Mouse
Logitech 
  hide details  
Reply
post #7838 of 11361
Quote:
Originally Posted by Asus11 View Post

anyone familiar with bsod 7f? I encountered it 45 mins into realbench stress test

temps under 70c

Yep, more vcore!
X9969X
(7 items)
 
  
CPUMotherboardGraphicsRAM
6950X @ 4.5GHz (Silicon Lottery 4.4 delid) Asus Rampage V Extreme  Nvidia Titan X Pascal Corsair Dominator Platinum 16GB DDR4 @ 3200MHz 
Hard DrivePowerCase
Intel 750 1.2TB SSD Corsair AX1200i Corsair Obsidian Series 900D 
  hide details  
Reply
X9969X
(7 items)
 
  
CPUMotherboardGraphicsRAM
6950X @ 4.5GHz (Silicon Lottery 4.4 delid) Asus Rampage V Extreme  Nvidia Titan X Pascal Corsair Dominator Platinum 16GB DDR4 @ 3200MHz 
Hard DrivePowerCase
Intel 750 1.2TB SSD Corsair AX1200i Corsair Obsidian Series 900D 
  hide details  
Reply
post #7839 of 11361
First attempt - set to 1.35V in BIOS but showing up as 1.376V in CPU-Z and HWmonitor? Is that normal?

Anyways, I managed to boot and RealBench stress at 4.6 GHz @ 1.35V, 74 degrees Celsius. How are my temps? Using H110 with a room temp of around 20 Celsius

What should I attempt next ? Up to 4.7 GHz or just decrease the volt to 1.3V?
Edited by chiggah - 6/28/16 at 12:54am
Skylake i7
(14 items)
 
  
CPUMotherboardGraphicsRAM
i7 6700K @ 4.6 Ghz 1.35v Asus Z170 Pro Gaming ASUS GTX 980 Ti STRIX Gaming 6 GB Kingston HyperX Fury 16GB (2 x 8GB) DDR4 2400MHz 
Hard DriveCoolingPowerCase
Samsung 850 PRO 250GB Corsair H110 EVGA SuperNova G2 1000W Fractal R5 
  hide details  
Reply
Skylake i7
(14 items)
 
  
CPUMotherboardGraphicsRAM
i7 6700K @ 4.6 Ghz 1.35v Asus Z170 Pro Gaming ASUS GTX 980 Ti STRIX Gaming 6 GB Kingston HyperX Fury 16GB (2 x 8GB) DDR4 2400MHz 
Hard DriveCoolingPowerCase
Samsung 850 PRO 250GB Corsair H110 EVGA SuperNova G2 1000W Fractal R5 
  hide details  
Reply
post #7840 of 11361
Quote:
Originally Posted by Arctucas View Post

STOP 0x0000007F: UNEXPECTED_KERNEL_MODE_TRAP

Usual causes: Memory corruption, Hardware (memory in particular), Overclocking failure, Installing a faulty or mismatched hardware (especially memory) or a failure after installing it, 3rd party firewall, Device drivers, SCSI/network/BIOS updates needed, Improperly seated cards, Incompatible storage devices, Overclocking, Virus scanner, Backup tool, Bad motherboard, Missing Service Pack

Excerpted from BSOD Index @ corrona.org.

its 0x0000008 for me

Quote:
Originally Posted by Yuhfhrh View Post

Yep, more vcore!

ahh maybe so, 1.43v then.. don't feel like giving it anymore tongue.gif
Code55
(14 items)
 
  
CPUMotherboardGraphicsRAM
i7-6700k 4.8 Asus Impact VIII / EK M8i Monoblock SeaHawk EK X 1080 Ti G.Skill Ripjaw V 2 x 16GB 3733CL15 1T 
Hard DriveHard DriveCoolingMonitor
INTEL 750 400GB U.2 SanDisk Extreme Pro 960GB EK D5 PWM Acer X34A 
KeyboardPowerCaseAudio
Logitech G810 EVGA 750 G2 In-Win D-Frame Mini Meridian Explorer 
  hide details  
Reply
Code55
(14 items)
 
  
CPUMotherboardGraphicsRAM
i7-6700k 4.8 Asus Impact VIII / EK M8i Monoblock SeaHawk EK X 1080 Ti G.Skill Ripjaw V 2 x 16GB 3733CL15 1T 
Hard DriveHard DriveCoolingMonitor
INTEL 750 400GB U.2 SanDisk Extreme Pro 960GB EK D5 PWM Acer X34A 
KeyboardPowerCaseAudio
Logitech G810 EVGA 750 G2 In-Win D-Frame Mini Meridian Explorer 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Skylake Overclocking Guide [With Statistics]