Overclock.net › Forums › Intel › Intel CPUs › Skylake Overclocking Guide [With Statistics]
New Posts  All Forums:Forum Nav:

Skylake Overclocking Guide [With Statistics] - Page 804

post #8031 of 11364
Quote:
Originally Posted by Jpmboy View Post

Just use EZ flash from within bios. It's very solid and has never borked a flash for me.

Thats the way i try and do it, and every other way possible, still no go.
post #8032 of 11364
Quote:
Originally Posted by PMPG View Post

Hi, i get crashes regardless of OC... i think its my mobo thats different somehow

Specs:
i5 6600K + NH-D15 Noctua
Gigabyte Z170XP-SLI with the latest bios
EVGA G2 750W
DDR4 Corsair Vengeance 16gb
GTX 1070 MSI Gaming X


Stock = Stable

Temperatures always fine, never above 60 degrees.

Ingame crashes with temps lower than 50 degrees.

Tried the following:
4.2 GHZ @ Auto Vcore = Crash
4.2 GHZ @ 1.35 Vcore = Crash
4.2 @ 1.4 Vcore = Crash
4.0 @ 1.4 Vcore = Crash
4.0 @ 1.4 Vcore + Loadline Calibration Set to high High + Turbo Boost OFF = Crash

What am i doing wrong? I have read reviews on newegg and some people has the same problem with my mobo. I bet theres some setting out there that i have forgotten to change...
Do i have to change C-states? I actually like having power saving features in idle mode so the system runs cool


Same problem i had, some post about it "a few" pages back. i had 6700k tho and gigabyte gaming k3. I had the same issues and they all went away with a new motherboard. However i returned
the gigabyte motherboard and today i found out that a few pins on the board (where the cpu sits) are bent frown.gif
Probably a long shot but worth a look for you maybe ?
High roll'a
(14 items)
 
  
CPUMotherboardGraphicsHard Drive
6700k Gigabyte z170gaming-k3 Gigabyte 980ti g1 gaming 2xssd 3-4 3'5 disks 
CoolingOSMonitorPower
H110gt Win10 pro 40" philips pc monitor Corsair hx1050w silver 
Case
Lian-Li PC-D600 
  hide details  
Reply
High roll'a
(14 items)
 
  
CPUMotherboardGraphicsHard Drive
6700k Gigabyte z170gaming-k3 Gigabyte 980ti g1 gaming 2xssd 3-4 3'5 disks 
CoolingOSMonitorPower
H110gt Win10 pro 40" philips pc monitor Corsair hx1050w silver 
Case
Lian-Li PC-D600 
  hide details  
Reply
post #8033 of 11364
Quote:
Originally Posted by Ottesen View Post

Same problem i had, some post about it "a few" pages back. i had 6700k tho and gigabyte gaming k3. I had the same issues and they all went away with a new motherboard. However i returned
the gigabyte motherboard and today i found out that a few pins on the board (where the cpu sits) are bent frown.gif
Probably a long shot but worth a look for you maybe ?

so was the MOBO at fault or the bent pins?

thank you
post #8034 of 11364
Quote:
Originally Posted by PMPG View Post

so was the MOBO at fault or the bent pins?

thank you

Don't know 100% yet, havent gotten the board back from the shop...
High roll'a
(14 items)
 
  
CPUMotherboardGraphicsHard Drive
6700k Gigabyte z170gaming-k3 Gigabyte 980ti g1 gaming 2xssd 3-4 3'5 disks 
CoolingOSMonitorPower
H110gt Win10 pro 40" philips pc monitor Corsair hx1050w silver 
Case
Lian-Li PC-D600 
  hide details  
Reply
High roll'a
(14 items)
 
  
CPUMotherboardGraphicsHard Drive
6700k Gigabyte z170gaming-k3 Gigabyte 980ti g1 gaming 2xssd 3-4 3'5 disks 
CoolingOSMonitorPower
H110gt Win10 pro 40" philips pc monitor Corsair hx1050w silver 
Case
Lian-Li PC-D600 
  hide details  
Reply
post #8035 of 11364
So I have a 6600k at 4.4 with 1.2v running at 50c full load. Been using it for games for more than a week with no issues, could probably get it to 4.5 with no further voltage.

Is that considered decent?
post #8036 of 11364
I have some question about non-K OC and Memory OC. Please help.

My setup is
i5-6500 delided
ASUS Z170-A official 1801 BIOS / non official 0050 BIOS
G.Skill Trident Z 3600Mhz CL17-18-18-38 (2x8GB)
Custom Water Cooling (240mm.+360mm.)

I can OC my i5-6500 to 5Ghz (156.25x32) at 1.49V with my previous RAM (G.Skill Ripjaws 4 3000Mhz 2x8GB) at 3333Mhz.
But I feel that memory doesn't OC like I expect so I sold it and got my new Trident Z 3600Mhz.

Then I try playing new RAM with 1801 BIOS (lastest official BIOS from ASUS) my RAM can OC to 3733Mhz CL15-15-15-28 with these setting.
- DRAM Voltage 1.45V
- VCCIO 1.15V
- VCCSA 1.15V
- VCCIO Boot Voltage 1.15V
- VCCSA Boot Voltage 1.25V
- DMI Voltage 1.3V

However when I try 0050 BIOS (non-K OC BIOS) I can't boot at anything higher than 3333Mhz memory no matter how much voltage or loosening timing even at stock 100Mhz BCLK.
Anything I can do ? or will there be a new BIOS for non-K OC.

Sorry for my bad English.
post #8037 of 11364
Quote:
Originally Posted by Crimson Flam3s View Post

So I have a 6600k at 4.4 with 1.2v running at 50c full load. Been using it for games for more than a week with no issues, could probably get it to 4.5 with no further voltage.

Is that considered decent?

I'd say its decent but don't be surprised if you need to raise the vcore to get stability.
Deadpool
(16 items)
 
   
CPUMotherboardGraphicsRAM
Intel i7-6700k at 4.7 GHz Asus Sabertooth Z170 EVGA GTX 1080 FTW Corsair Dominator Platinum DDR4-3000 16 GB 
Hard DriveHard DriveOptical DriveCooling
Samsung 850 Pro 512 GB SSD Western Digital Caviar Blue 1 TB HDD Asus Blu Ray Drive Corsair H115i 
CoolingCoolingOSKeyboard
2 Noctua NF-A14 Radiator Fans 3 Noctua NF-S12A PWM Airflow Fans Windows 10 64-bit Corsair Vengeance K70 
PowerCaseMouseAudio
EVGA SuperNova P2 750W Corsair Vengeance C70 Corsair M95 Corsair Vengeance 1500 v2 
  hide details  
Reply
Deadpool
(16 items)
 
   
CPUMotherboardGraphicsRAM
Intel i7-6700k at 4.7 GHz Asus Sabertooth Z170 EVGA GTX 1080 FTW Corsair Dominator Platinum DDR4-3000 16 GB 
Hard DriveHard DriveOptical DriveCooling
Samsung 850 Pro 512 GB SSD Western Digital Caviar Blue 1 TB HDD Asus Blu Ray Drive Corsair H115i 
CoolingCoolingOSKeyboard
2 Noctua NF-A14 Radiator Fans 3 Noctua NF-S12A PWM Airflow Fans Windows 10 64-bit Corsair Vengeance K70 
PowerCaseMouseAudio
EVGA SuperNova P2 750W Corsair Vengeance C70 Corsair M95 Corsair Vengeance 1500 v2 
  hide details  
Reply
post #8038 of 11364
Quote:
Originally Posted by Enterprise24 View Post

I have some question about non-K OC and Memory OC. Please help.

My setup is
i5-6500 delided
ASUS Z170-A official 1801 BIOS / non official 0050 BIOS
G.Skill Trident Z 3600Mhz CL17-18-18-38 (2x8GB)
Custom Water Cooling (240mm.+360mm.)

I can OC my i5-6500 to 5Ghz (156.25x32) at 1.49V with my previous RAM (G.Skill Ripjaws 4 3000Mhz 2x8GB) at 3333Mhz.
But I feel that memory doesn't OC like I expect so I sold it and got my new Trident Z 3600Mhz.

Then I try playing new RAM with 1801 BIOS (lastest official BIOS from ASUS) my RAM can OC to 3733Mhz CL15-15-15-28 with these setting.
- DRAM Voltage 1.45V
- VCCIO 1.15V
- VCCSA 1.15V
- VCCIO Boot Voltage 1.15V
- VCCSA Boot Voltage 1.25V
- DMI Voltage 1.3V

However when I try 0050 BIOS (non-K OC BIOS) I can't boot at anything higher than 3333Mhz memory no matter how much voltage or loosening timing even at stock 100Mhz BCLK.
Anything I can do ? or will there be a new BIOS for non-K OC.

Sorry for my bad English.

This might not be relevant to your case but... My 6600k that is delidded when I run it @ 4.9 or 5.0... I tend to run into issues with running memory over a certain speed. Sometimes I can but its not really "stable". I have on TZ 3400 kit that runs flawless on it but some of my other kits and anything over 3400 I have issues with.

Personally I just assumed it was due to the speed I was running combined with the IMC of my cpu. My 6700k @ 4.9... can run my TZ 3600 "low latency" kit without issue. Along with any other DDR4 memory kit I have. Well... the TZ 4266 kit I had never really did as well as I thought it should.. but I sold that a while ago.
post #8039 of 11364
Quote:
Originally Posted by Enterprise24 View Post

I have some question about non-K OC and Memory OC. Please help.

My setup is
i5-6500 delided
ASUS Z170-A official 1801 BIOS / non official 0050 BIOS
G.Skill Trident Z 3600Mhz CL17-18-18-38 (2x8GB)
Custom Water Cooling (240mm.+360mm.)

I can OC my i5-6500 to 5Ghz (156.25x32) at 1.49V with my previous RAM (G.Skill Ripjaws 4 3000Mhz 2x8GB) at 3333Mhz.
But I feel that memory doesn't OC like I expect so I sold it and got my new Trident Z 3600Mhz.

Then I try playing new RAM with 1801 BIOS (lastest official BIOS from ASUS) my RAM can OC to 3733Mhz CL15-15-15-28 with these setting.
- DRAM Voltage 1.45V
- VCCIO 1.15V
- VCCSA 1.15V
- VCCIO Boot Voltage 1.15V
- VCCSA Boot Voltage 1.25V
- DMI Voltage 1.3V

However when I try 0050 BIOS (non-K OC BIOS) I can't boot at anything higher than 3333Mhz memory no matter how much voltage or loosening timing even at stock 100Mhz BCLK.
Anything I can do ? or will there be a new BIOS for non-K OC.

Sorry for my bad English.

So, it is unlikely that Elmor will invest more time into the non-K unlocks. These are, of course, not official and not supported by ASUS. I can;t say I've experienced this problem running my 6320 at 4.875 to 4.990 using 4x8GB of 3200c14 at speeds up to 3600c13 (1.7V vdimm). I have a 2x4GB 4000c19 ram kit that will run 3900+ with the unlock bios for this Max8E.
You probably need to increase vccsa to near 1.3 for boot, and may need 1.275V eventual (run voltage) for 0050 to hold 3600+ ram frequencies.

What Stand-by voltage are you running, and does that MB have PLL bandwidth adjustment?
x99
(22 items)
 
Z370
(8 items)
 
x299
(18 items)
 
CPUCPUMotherboardGraphics
i7 5960X i7 6950X Asus Rampage V Extreme 10 2 GTX Titan X Pascal 
RAMHard DriveHard DriveHard Drive
GSkill 3200c14 TZs 8x8GB @ 3400c13 Intel 750 NVMe 400GB 2x Plextor SSD 256 Raid 0 (Win 7) Samsung NVMe 950 Pro M.2 
Optical DriveCoolingCoolingCooling
Plextor 810 2x XSPC RX360 Koolance 380i D5 
CoolingOSOSOS
Aquaero 6 Windows 10 x64  Windows 7 Pro Linux Mint 
MonitorKeyboardPowerCase
Seiki 50" 4K monitor (720P-2160i) 240-30Hz Das Keyboard Model S Pro Corsair AX1200 Case Labs SM8 
MouseAudio
Steelseries Rival Ultimate Ears TF10 
CPUMotherboardGraphicsRAM
8700K ASUS Maximus X Apex GTX 1080 2x8 GB G.Skill 4400c19 
Hard DriveCoolingOSCase
Samsung 960 Pro 360Rad + Chiller Win 10 HWBOT OBT 
CPUCPUMotherboardGraphics
7740X 7980XE ASUS Rampage Vi Apex 2x Nvidia Titan Xp SLi 
RAMHard DriveHard DriveHard Drive
G.Skill 3600c15 2x8GB kits Intel 900p WD Raptor 1T Plextor SSDs Raid 0 
Optical DriveCoolingOSOS
Plextor DVD/BR R/W (very) Custom Water Windows 10 Pro Windows 7 Pro 
MonitorKeyboardPowerCase
ASUS 144Hz Ducky Corsair 1500i Microcool Benchetto 101 
MouseAudio
Steelseries Rival Ultimate ears TF10s (IEMs) 
  hide details  
Reply
x99
(22 items)
 
Z370
(8 items)
 
x299
(18 items)
 
CPUCPUMotherboardGraphics
i7 5960X i7 6950X Asus Rampage V Extreme 10 2 GTX Titan X Pascal 
RAMHard DriveHard DriveHard Drive
GSkill 3200c14 TZs 8x8GB @ 3400c13 Intel 750 NVMe 400GB 2x Plextor SSD 256 Raid 0 (Win 7) Samsung NVMe 950 Pro M.2 
Optical DriveCoolingCoolingCooling
Plextor 810 2x XSPC RX360 Koolance 380i D5 
CoolingOSOSOS
Aquaero 6 Windows 10 x64  Windows 7 Pro Linux Mint 
MonitorKeyboardPowerCase
Seiki 50" 4K monitor (720P-2160i) 240-30Hz Das Keyboard Model S Pro Corsair AX1200 Case Labs SM8 
MouseAudio
Steelseries Rival Ultimate Ears TF10 
CPUMotherboardGraphicsRAM
8700K ASUS Maximus X Apex GTX 1080 2x8 GB G.Skill 4400c19 
Hard DriveCoolingOSCase
Samsung 960 Pro 360Rad + Chiller Win 10 HWBOT OBT 
CPUCPUMotherboardGraphics
7740X 7980XE ASUS Rampage Vi Apex 2x Nvidia Titan Xp SLi 
RAMHard DriveHard DriveHard Drive
G.Skill 3600c15 2x8GB kits Intel 900p WD Raptor 1T Plextor SSDs Raid 0 
Optical DriveCoolingOSOS
Plextor DVD/BR R/W (very) Custom Water Windows 10 Pro Windows 7 Pro 
MonitorKeyboardPowerCase
ASUS 144Hz Ducky Corsair 1500i Microcool Benchetto 101 
MouseAudio
Steelseries Rival Ultimate ears TF10s (IEMs) 
  hide details  
Reply
post #8040 of 11364
Quote:
Originally Posted by tashcz View Post

Just take a screenshot like you did on stock so we can see what happens when you're on load at overclock smile.gif

Hi again

I usually just freeze when i OC, no BSOD. But today i got BSOD twice when i tried again.

HWINFO @ 4,2GHZ + 1,35Vcore and also a picture of BSOD http://imgur.com/a/E5CbO

Can u guys see anything wrong with my settings? (problem is that i freeze regardless of OC, stock works fine, only freeze in games)
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Skylake Overclocking Guide [With Statistics]