got on making the acrylic mount for the reservoir, being it i still have to print out the other rez mount. Gonna bolt them down with 3mm screws to the acrylic.
started work on the GPU mount.
will use the hole in the PSB where the I/O shield of the GPU was secured to and a hole right up against the 6 pin connector to keep the GPU in place. Ill put acrylic "shelfs" just under the GPU so it also rest on that and not only on the 2 screws as it quite a heavy beast this GTX 285
I should really change my name from S7 design to Raised from the dead Mods as how much old stuff i gave life to again it just seems fitting
any ways marked out and tapped holes for the mobo offsets ill be using here to lift the GPU of the acrylic to give it some more air circulation, also am thinking of drilling a few holes in the acrylic for a better air flow
only the top two mounts will hold the GPU the bottom ones are just to keep the distance
still need to put on the acrylic "shelfs" for safety but the 2 screws do hold the GPU on the board