Overclock.net › Forums › Cooling › Water Cooling › Adequate cooling?
New Posts  All Forums:Forum Nav:

Adequate cooling? - Page 3

post #21 of 24
Thread Starter 
Quote:
Originally Posted by Elyminator View Post

Pardon me im on my phone but it looks like you could probably put a 120 rad between the 2 rads

No, the PSU is standing on edge between the rads. May be 4 inches between them. I might be able to mount a pair of little 80mm rads at the rear where the 80mm exhaust fans are going to go. Are those little things even worth the trouble?
post #22 of 24
Nope skip um
post #23 of 24
I don't know if you were planning to run the two 290x's like that, but i would get a EK-FC Bridge Dual Parallel block top for the gpu blocks so they both get the same amount of cold water, that way you could avoid having a hotter second card and raising the water temp slightly more.
Quote:
Originally Posted by Retrosmith View Post




This was is just a optional idea, and you would probably be fine without it.
post #24 of 24
Thread Starter 
A month and a half and several changes later and I'm running external cooling. Have two Black Ice 420 radiators mounted on a base plate hidden next to the stand the PC is on, tubing runs out the back of the case and straight down, invisible as it sits.

Cooling has been handled.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › Adequate cooling?