yep pls, my original bios with mod powerlimit/throttle fix for 67°
my original bios is with 1.187v and is good for my oc 1500/2000 (i dont go for record tongue.gif), but i want avoid -13mhz throttle ^^
i have another question, i see my card on windows startup with low core/mem like low pstate (135/405) and soon i do something them go up to 1404/4001 and never go down again.
same for the voltage go up from 0.862 to 1.212 and never go down.
this is needed to avoid throttle 67°?
Here yo go
Strix980Ti----Dark.zip 147k .zip file
1506/2000 1.187v and no throttle
the card should IDLE just fine, make sure nvidia power plan set to Adaptive not High Performance..
Hello, i am using MSI AB..but i have closed MSI AB before flashing bios. Now I boot into safe mode & flashed my stock bios..then resume normal. Is it related to my driver? The version of driver is 361.75
Make sure MSI AB at the stock setting ( no oc from that ) as the new bios has the max stable clock.. so if msi AB still has the OC setting the core clock will be very high and the card will crash.
no men, when he install the bios, and try to enable device, the system crash and cant installa the driver
Are you sure MSI AB at stock setting ? NO OC from that ?
Simply the card will not accept the bios if the bios for MSI and you have Gigabyte
Hi Mr Dark, been following this thread for a while. Great work.
Would like to flash my own GPU Zotac 980ti AMP!, just a standard stable overclock will do. My ASIC is 75.0%. Best I have been able to get in MSI Afterburner without increasing core voltage is 110% power Limit, +220 Core Clock, +50 Memory Clock (watercooled)
EfnitaGPUorgbios.zip 152k .zip file
Thanks in advance!
I can help but i need a little more info. how much the core clock under load ? you want stock voltage or 1.255v or the max ?