Originally Posted by goffemannen
yeah really strange. Haven't checked the fan on the gpu itself, just the rad fan. The rad fan is connected to the gpu tho. So it's that fan speed that is showed in afterburner etc. At least I think it is
. The speed on the rad fan follows the settings made in afterburner.
When I say I've checked a fan, I've looked at it and see that it's spinning, not just the speed in windows
Good to know that bro, i'm getting those card soon
yup . high performance was the issue.
i want to change voltage to 1,22v
first slider should stay 1250-1250
sliders 2-4 shoud have 1220 - 1220 ?
slider 5-6 should be 725-1220 ?
am i right?
for 1.22v change all value from 1.250v to 1.22v that's it as the picture. and scroll down there is another value to change
Can you please when you get the chance make me 2 custom Bios for my GTX 980 Ti? My card is also under custom EK watercooling
1. Voltage of 1.2, Core Clock: 1350Mhz, Memory clock of 3600Mhz, higher TDP and power limit, Boost off.
2. Voltage of 1.25, Core Clock: 1500Mhz, Memory clock of 3700Mhz, higher TDP and power limit, Boost off.
I appreciate your work and time thumb.gif
GM200.zip 152k .zip file
here is what you ask for
980Ti--MSI---Dark.zip 304k .zip file
Hello MR-DARK. I tryed to unlock voltage first with kepler bios tweaker and then saved and then i opened bios with MBT, i noticed that now thete in the bios has more lines what can adjust. I watch those pictures from page 370 and try to copy them but i have 4 lines instead 3? Voltage do not raise over 1.2740 v.
my card is this: http://www.techpowerup.com/gpudb/b3312/asus-gtx-980-ti.html
and this is my stock bios vakio.zip 152k .zip file
Card runs with stock bios 1400 mzh clock and 2000 mzh memory and i have it evgas hybrid aio water cooler. In hard test tempperature is under 55 C.
asic is 61.8.
If you can do the whole bios to me i would very gratefull, thank you.
With some experimentation what i did with bios i get best results only 1480 mzh clock and that 1.2740 voltage. I think that if i want more clock i need raise voltage?
Is this card bossible go over 1500 mzh ? If can, could you do it in to the bios please.
Give this a try
980Ti--Refernce---Dark.zip 152k .zip file
Core clock 1506mhz & 8Ghz memory (equal to 2000mhz ) & higher TDP limit & 1.275v & boost off
I have solved my temp issue on card 2. I removed the radiator from it's original position and placed it outside the chassi. When I did that I got the same temps as card 1. So I figured that the motherboard heatsink and the rams is warming the radiator where it was placed. The radiator and the tubes were really close and those heatsinks and the rams and they got really warm.
I then placed the radiator for card 2 in the front at the bottom behind one of the 140mm intake fans. Now card 2 runs 4-5 degrees colder than card 1 smile.gif.
It could have something to do with that I overclocked my cpu more last weekend. More hz and volts, could have made the motherboard and rams warmer. I don't know. But my issue is fixed.
Good to hear that, and yes Intake for any Rad is the best for the temp but remember the Air on the case will be warmer as the hot air stay inside the case not
Yo bro can u work your magic on my bios ( Gainward gtx 970 phoenix )
core clock 1500mhz & 3.5ghz memory @ 1.275v & Boost OFF
here is the bios
GM204.zip 151k .zip file
here is what you ask for
Gainward970---Dark.zip 151k .zip file