Overclock.net › Forums › Graphics Cards › NVIDIA › Nvidia GTX 900 cards custom bios (upon request )
New Posts  All Forums:Forum Nav:

Nvidia GTX 900 cards custom bios (upon request ) - Page 44

post #431 of 8708
Quote:
Originally Posted by seithan View Post

Hello Mr.D,

i posted a few days earlier after updating my GPU with your modded BIOS - which seems to provides the GPU stability it was lacking, thank you - and i mentioned that my card doesnt clock down, which you responded it should.

What can i do to enable my card to clock down and volt down. Its running 50c+ at idle, which is unwanted by any way you see it.

Thanx in advance!
thats Mr.Prof.Dr. to you and thats how the cards that have the zero decibel come they idle high for some reason
things for now
(17 items)
 
  
CPUMotherboardGraphicsRAM
i5 4590k at 4.4GHZ asrock extreme 4  msi 970 gaming 4g something i dont remember 
Hard DriveHard DriveHard DriveHard Drive
western digital 4tb black samsung 850 pro smasung 940 evo kingston hyperX 
CoolingOSMonitorKeyboard
H100i win10 asus one of the 1440p ones razer black widow ultimate 2013 
PowerCaseMouseMouse Pad
corsair rm 750 corsair air 540 corsair saber RGB that one from office depo 
Audio
audio technica ath m50 
  hide details  
Reply
things for now
(17 items)
 
  
CPUMotherboardGraphicsRAM
i5 4590k at 4.4GHZ asrock extreme 4  msi 970 gaming 4g something i dont remember 
Hard DriveHard DriveHard DriveHard Drive
western digital 4tb black samsung 850 pro smasung 940 evo kingston hyperX 
CoolingOSMonitorKeyboard
H100i win10 asus one of the 1440p ones razer black widow ultimate 2013 
PowerCaseMouseMouse Pad
corsair rm 750 corsair air 540 corsair saber RGB that one from office depo 
Audio
audio technica ath m50 
  hide details  
Reply
post #432 of 8708
Quote:
Originally Posted by Mr-Dark View Post

Hello there

as the title say its ( Upon request ) wink.gif

Sure i can change anything you want from the bios biggrin.gif

tell me which clock / voltage you like ? & the card will IDLE @low clock/voltage also increasing the voltage depend on how the modded bios made

or a bios with boost off and 1405mhz core clock & voltage unlocked & higher TDP will work fine for you ?

Thanks.

1500core, not sure which voltage is fine rolleyes.gif if it can be adjusted ( Volts ) then from stock volts to what can be done ?
Core X9
(16 items)
 
  
CPUMotherboardGraphicsRAM
3930k ASUS RAMPAGE IV EXTREME GTX980 Gaming G.Skill F3-2400C10D-16GTX 
Hard DriveHard DriveHard DriveCooling
Western Digital Caviar Black Samsung 850Evo Western Digital Green Custom Loop 
MonitorKeyboardPowerCase
QNIX 2710 cooler master quickfire pro EVGA Supernova G2 1300W Thermaltake Core X9 
MouseMouse PadAudioAudio
G502 qck heavy Asus STX DT 990 
  hide details  
Reply
Core X9
(16 items)
 
  
CPUMotherboardGraphicsRAM
3930k ASUS RAMPAGE IV EXTREME GTX980 Gaming G.Skill F3-2400C10D-16GTX 
Hard DriveHard DriveHard DriveCooling
Western Digital Caviar Black Samsung 850Evo Western Digital Green Custom Loop 
MonitorKeyboardPowerCase
QNIX 2710 cooler master quickfire pro EVGA Supernova G2 1300W Thermaltake Core X9 
MouseMouse PadAudioAudio
G502 qck heavy Asus STX DT 990 
  hide details  
Reply
post #433 of 8708
Quote:
Originally Posted by Cannonkill View Post

thats Mr.Prof.Dr. to you and thats how the cards that have the zero decibel come they idle high for some reason
Hi, there!

No its the G1 980 and its stuck at 1.25v 1506/8000Mhz.

So far looks rock stable but it doesnt downclock. Any clue?
post #434 of 8708
Go back into the bios and just double check everything
things for now
(17 items)
 
  
CPUMotherboardGraphicsRAM
i5 4590k at 4.4GHZ asrock extreme 4  msi 970 gaming 4g something i dont remember 
Hard DriveHard DriveHard DriveHard Drive
western digital 4tb black samsung 850 pro smasung 940 evo kingston hyperX 
CoolingOSMonitorKeyboard
H100i win10 asus one of the 1440p ones razer black widow ultimate 2013 
PowerCaseMouseMouse Pad
corsair rm 750 corsair air 540 corsair saber RGB that one from office depo 
Audio
audio technica ath m50 
  hide details  
Reply
things for now
(17 items)
 
  
CPUMotherboardGraphicsRAM
i5 4590k at 4.4GHZ asrock extreme 4  msi 970 gaming 4g something i dont remember 
Hard DriveHard DriveHard DriveHard Drive
western digital 4tb black samsung 850 pro smasung 940 evo kingston hyperX 
CoolingOSMonitorKeyboard
H100i win10 asus one of the 1440p ones razer black widow ultimate 2013 
PowerCaseMouseMouse Pad
corsair rm 750 corsair air 540 corsair saber RGB that one from office depo 
Audio
audio technica ath m50 
  hide details  
Reply
post #435 of 8708
drivers, GeForce experience, another 3d app running the background? could be any number of things? tried setting adaptive power in NVidia control panel?
     
CPUMotherboardGraphicsGraphics
Intel Core i7 7820X 4.5GHz/3200MHz mesh @ 1.1v Asus STRIX X299-E GAMING  eVGa 1080 Ti 11GB FTW3 HYBRID 2037/12000MHz PhysX Card: eVGA 1070 SC2 2037/9000 
RAMRAMHard DriveHard Drive
Corsair Vengeance RGB 32GB DDR4-3200 Corsair Vengeance LPX Black 32GB DDR4-3200 Samsung 960 EVO 250GB M.2-NVMe SSD - Windows/Boot OCZ TRION 150 480GB 2.5" SSD - Games(RAID0) 
Hard DriveCoolingOSMonitor
OCZ TRION 150 480GB 2.5" SSD - Games(RAID0) Thermaltake Water 3.0 Riing RGB 360 AIO LCS Windows 7 SP1 Ultimate 64-bit LG 47LN5400 47in. HDTV @ 120Hz 
KeyboardPowerCaseMouse
Razer Ornato Chroma Thermaltake Toughpower DPS G RGB Titanium 1000W... Thermaltake Core X31 RGB Razer Deathadder Chroma 
Mouse PadAudio
Razer Firefly Chroma Samsung K360 Soundbar+Subwoofer 
CPUMotherboardGraphicsRAM
AMD A6-7310 2.00GHz Dual-core HP POS AMD Radeon R4 4GB  
Hard DriveOptical DriveCoolingOS
Some POS 240GB SSD More HP junk Stock Windows 7 SP1 Ultimate x64 
OSMonitorKeyboardPower
Linux Mint 18.2 Sonya x64 Samsung 40 in. Insignia wireless HP garbage PS 
MouseAudioAudio
Insignia wireless Realtek something Onkyo HT-R592 7.1 
  hide details  
Reply
     
CPUMotherboardGraphicsGraphics
Intel Core i7 7820X 4.5GHz/3200MHz mesh @ 1.1v Asus STRIX X299-E GAMING  eVGa 1080 Ti 11GB FTW3 HYBRID 2037/12000MHz PhysX Card: eVGA 1070 SC2 2037/9000 
RAMRAMHard DriveHard Drive
Corsair Vengeance RGB 32GB DDR4-3200 Corsair Vengeance LPX Black 32GB DDR4-3200 Samsung 960 EVO 250GB M.2-NVMe SSD - Windows/Boot OCZ TRION 150 480GB 2.5" SSD - Games(RAID0) 
Hard DriveCoolingOSMonitor
OCZ TRION 150 480GB 2.5" SSD - Games(RAID0) Thermaltake Water 3.0 Riing RGB 360 AIO LCS Windows 7 SP1 Ultimate 64-bit LG 47LN5400 47in. HDTV @ 120Hz 
KeyboardPowerCaseMouse
Razer Ornato Chroma Thermaltake Toughpower DPS G RGB Titanium 1000W... Thermaltake Core X31 RGB Razer Deathadder Chroma 
Mouse PadAudio
Razer Firefly Chroma Samsung K360 Soundbar+Subwoofer 
CPUMotherboardGraphicsRAM
AMD A6-7310 2.00GHz Dual-core HP POS AMD Radeon R4 4GB  
Hard DriveOptical DriveCoolingOS
Some POS 240GB SSD More HP junk Stock Windows 7 SP1 Ultimate x64 
OSMonitorKeyboardPower
Linux Mint 18.2 Sonya x64 Samsung 40 in. Insignia wireless HP garbage PS 
MouseAudioAudio
Insignia wireless Realtek something Onkyo HT-R592 7.1 
  hide details  
Reply
post #436 of 8708
Quote:
Originally Posted by seithan View Post

Hi, there!

No its the G1 980 and its stuck at 1.25v 1506/8000Mhz.

So far looks rock stable but it doesnt downclock. Any clue?

NVIDIA control panel. Make sure power management mode is set to "adaptive" and not "prefer maximum performance".
post #437 of 8708
Thread Starter 
Quote:
Originally Posted by seithan View Post

Hello Mr.D,

i posted a few days earlier after updating my GPU with your modded BIOS - which seems to provides the GPU stability it was lacking, thank you - and i mentioned that my card doesnt clock down, which you responded it should.

What can i do to enable my card to clock down and volt down. Its running 50c+ at idle, which is unwanted by any way you see it.

Thanx in advance!

Hello there a clean install for the driver will do the trick for you thumb.gif the latest driver sometime push the gpu to the 3D clock in IDLE

+1
Quote:
thats Mr.Prof.Dr. to you and thats how the cards that have the zero decibel come they idle high for some reason
Quote:
drivers, GeForce experience, another 3d app running the background? could be any number of things? tried setting adaptive power in NVidia control panel?
Quote:
NVIDIA control panel. Make sure power management mode is set to "adaptive" and not "prefer maximum performance".

Quote:
Thanks.

1500core, not sure which voltage is fine rolleyes.gif if it can be adjusted ( Volts ) then from stock volts to what can be done ?

Give this a try

MSI980Dark.zip 136k .zip file

Core clock 1506mhz & 3.7ghz memory & 1.24v ( you can push this to 1.28v from oc software ) & 360W TDP & boost off

flash and report back!
    
CPUMotherboardGraphicsRAM
Intel Core I7 8700k 6 Core OC 4.7Ghz Gigabyte Z370 Gaming 5 AORUS Asus GTX 1060 GB Strix Corsair Vengeance RGB 16GB 3ghz 
Hard DriveHard DriveHard DriveCooling
Samsung 960 Evo 250GB + EK heatsink  Samsung 960 Evo 250GB + EK heatsink  PNY CS480 480GB SSD NZXT Kraken X61 + Corsair HD140 Fan's 
OSMonitorKeyboardPower
Windows 10 Pro 64BIt Asus VG248QE Razer blackwidow chroma  Corsair RM850i 850W 
CaseMouse
phanteks enthoo luxe tempered glass + HD140 Fan... Razer Elite 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel Core I7 8700k 6 Core OC 4.7Ghz Gigabyte Z370 Gaming 5 AORUS Asus GTX 1060 GB Strix Corsair Vengeance RGB 16GB 3ghz 
Hard DriveHard DriveHard DriveCooling
Samsung 960 Evo 250GB + EK heatsink  Samsung 960 Evo 250GB + EK heatsink  PNY CS480 480GB SSD NZXT Kraken X61 + Corsair HD140 Fan's 
OSMonitorKeyboardPower
Windows 10 Pro 64BIt Asus VG248QE Razer blackwidow chroma  Corsair RM850i 850W 
CaseMouse
phanteks enthoo luxe tempered glass + HD140 Fan... Razer Elite 
  hide details  
Reply
post #438 of 8708
Quote:
Originally Posted by Mr-Dark View Post

Hello there a clean install for the driver will do the trick for you thumb.gif the latest driver sometime push the gpu to the 3D clock in IDLE

+1



Give this a try

MSI980Dark.zip 136k .zip file

Core clock 1506mhz & 3.7ghz memory & 1.24v ( you can push this to 1.28v from oc software ) & 360W TDP & boost off

flash and report back!

Thanks. Will test when i get home. I'm using MSI Afterburner. Should i just Max the Power and Temp target ( Does that matter? ) and which slider should i use to adjust the voltage?

+REP thumb.gif
Core X9
(16 items)
 
  
CPUMotherboardGraphicsRAM
3930k ASUS RAMPAGE IV EXTREME GTX980 Gaming G.Skill F3-2400C10D-16GTX 
Hard DriveHard DriveHard DriveCooling
Western Digital Caviar Black Samsung 850Evo Western Digital Green Custom Loop 
MonitorKeyboardPowerCase
QNIX 2710 cooler master quickfire pro EVGA Supernova G2 1300W Thermaltake Core X9 
MouseMouse PadAudioAudio
G502 qck heavy Asus STX DT 990 
  hide details  
Reply
Core X9
(16 items)
 
  
CPUMotherboardGraphicsRAM
3930k ASUS RAMPAGE IV EXTREME GTX980 Gaming G.Skill F3-2400C10D-16GTX 
Hard DriveHard DriveHard DriveCooling
Western Digital Caviar Black Samsung 850Evo Western Digital Green Custom Loop 
MonitorKeyboardPowerCase
QNIX 2710 cooler master quickfire pro EVGA Supernova G2 1300W Thermaltake Core X9 
MouseMouse PadAudioAudio
G502 qck heavy Asus STX DT 990 
  hide details  
Reply
post #439 of 8708
Thread Starter 
Quote:
Originally Posted by SeekerZA View Post

Thanks. Will test when i get home. I'm using MSI Afterburner. Should i just Max the Power and Temp target ( Does that matter? ) and which slider should i use to adjust the voltage?

+REP thumb.gif

the Power/Temp adjusted from the bios no need to touch anything.. just push the clock farther + the voltage

if you have no voltage slider go to the setting (general table ) and enable voltage monitoring + voltage control thumb.gif
    
CPUMotherboardGraphicsRAM
Intel Core I7 8700k 6 Core OC 4.7Ghz Gigabyte Z370 Gaming 5 AORUS Asus GTX 1060 GB Strix Corsair Vengeance RGB 16GB 3ghz 
Hard DriveHard DriveHard DriveCooling
Samsung 960 Evo 250GB + EK heatsink  Samsung 960 Evo 250GB + EK heatsink  PNY CS480 480GB SSD NZXT Kraken X61 + Corsair HD140 Fan's 
OSMonitorKeyboardPower
Windows 10 Pro 64BIt Asus VG248QE Razer blackwidow chroma  Corsair RM850i 850W 
CaseMouse
phanteks enthoo luxe tempered glass + HD140 Fan... Razer Elite 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel Core I7 8700k 6 Core OC 4.7Ghz Gigabyte Z370 Gaming 5 AORUS Asus GTX 1060 GB Strix Corsair Vengeance RGB 16GB 3ghz 
Hard DriveHard DriveHard DriveCooling
Samsung 960 Evo 250GB + EK heatsink  Samsung 960 Evo 250GB + EK heatsink  PNY CS480 480GB SSD NZXT Kraken X61 + Corsair HD140 Fan's 
OSMonitorKeyboardPower
Windows 10 Pro 64BIt Asus VG248QE Razer blackwidow chroma  Corsair RM850i 850W 
CaseMouse
phanteks enthoo luxe tempered glass + HD140 Fan... Razer Elite 
  hide details  
Reply
post #440 of 8708
Hi

I have Asus Strix 960

Orginal Bios https://drive.google.com/file/d/0B2O9YSOpBdRUSUczMEo0aVA1Um8/view?usp=sharing

Max stable oc

Gpu - 1492 - orinal vcore 1,200
Mem - 2000

I nide:
1. Disable boost clock - boost OFF smile.gif
2. locked the voltage
3. TDP - MAX smile.gif ~ 120% ?
4. Vcore 1,28



you help me?
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: NVIDIA
Overclock.net › Forums › Graphics Cards › NVIDIA › Nvidia GTX 900 cards custom bios (upon request )