Overclock.net › Forums › Graphics Cards › NVIDIA › Nvidia GTX 900 cards custom bios (upon request )
New Posts  All Forums:Forum Nav:

Nvidia GTX 900 cards custom bios (upon request ) - Page 619

post #6181 of 8545
Quote:
Originally Posted by Madmaxneo View Post

Haha, Awesome!!

Question:
Is it safe to assume that as a general rule of thumb when ones intention is to mod the bios for the best OC is to get the least expensive version of the particular card?

Well if you wan't the max potential for oc you shouldn't go with the cheapest model, you should get one with no hard voltage limit, in gtx 970 for example msi twin frozer, gigabyte g1 or evga classified . Most cheapest versions usually have hard lock on voltage control which you can't bypass with modding bios.
post #6182 of 8545
Quote:
Originally Posted by Mr-Dark View Post

Here yo go

GM200---MSI---Dark.zip 152k .zip file

Core clock 1506mhz & 8ghz memory & 1.275v & higher TDP limit & boost off

Rest all OC software and flash that bios and let me know how yo go thumb.gif


Hey thank heaps for your mod!

I can get 3D Mark to pass with one card but find its slightly unstable, slight artefacts maybe? Noticed more when running SLI.

Using after burning and lowering gpu -90 (Max I can lower it) improves it but am getting slight odd stutters, normal bios fixes issue. should the custom bios only be used on watercooling? My blocks are still on their way
Edited by jord06 - 6/26/16 at 8:22am
post #6183 of 8545
Quote:
Originally Posted by Mr-Dark View Post


Sure, here yo go

Hybrid---Ti---1.200v--1506--3700.zip 152k .zip file

Btw, that bios was Super Ugly... Its look way better now smile.gif

Thank you Mr-Dark! I appreciate the cleanup of the mess on the bios as well! +rep

Congrats on your new toys too!
Jesktop
(19 items)
 
  
CPUMotherboardGraphicsRAM
i7 5820k Asus X99 Pro USB 3.1 EVGA GTX 1080 Ti SC2 Hydrocopper  Corsair Vengeance LPX 3000mhz 16gb 
Hard DriveOptical DriveCoolingCooling
Samsung 850 EVO Lite ON 24x EK-CoolStream PE 360 (Triple) EK-CoolStream PE 240 (Dual) 
CoolingCoolingOSMonitor
EK-CoolStream PE 120 (Single) EK-Supremacy EVO CPU Water Block White Edition ... Windows 10 Home 64bit Asus PG279Q 
KeyboardPowerCaseMouse
Logitech K800 Corsair AX860 Phanteks Enthoo Luxe Tempered Glass Logitech G502 
Mouse PadAudioOther
steelseries Boston Kaze Scythe 12x Fan Controller 
  hide details  
Reply
Jesktop
(19 items)
 
  
CPUMotherboardGraphicsRAM
i7 5820k Asus X99 Pro USB 3.1 EVGA GTX 1080 Ti SC2 Hydrocopper  Corsair Vengeance LPX 3000mhz 16gb 
Hard DriveOptical DriveCoolingCooling
Samsung 850 EVO Lite ON 24x EK-CoolStream PE 360 (Triple) EK-CoolStream PE 240 (Dual) 
CoolingCoolingOSMonitor
EK-CoolStream PE 120 (Single) EK-Supremacy EVO CPU Water Block White Edition ... Windows 10 Home 64bit Asus PG279Q 
KeyboardPowerCaseMouse
Logitech K800 Corsair AX860 Phanteks Enthoo Luxe Tempered Glass Logitech G502 
Mouse PadAudioOther
steelseries Boston Kaze Scythe 12x Fan Controller 
  hide details  
Reply
post #6184 of 8545
Hello mr dark , my 1.3V custom bios for my xtreme windforce works still great with 1570/8000 with not a single crash or instability biggrin.gif , but i got some black screens in heavy gaming (remembered my 290x when ocing the memory had the same trouble) with new nvidia drivers release and just back off my memory from 8200->8000 also i am not longer able to benchmark my card higher when i could do that before some months , could my chip start degradating or they messed a bit the drivers? By the way , what power limit are you using for this bios 160%? rolleyes.gif

*I am getting really good bench scores , about 21.800 on firestrike which is a stock 1080!*
Spartan
(11 items)
 
  
CPUMotherboardGraphicsRAM
5820k X99-A/3.1USB 980TI XTREME WINDFORCE RIPJAWS IV 2400MHZ 
Hard DriveCoolingOSMonitor
WD 1TB Phobya 360lt kit WINDOWS 10 PRO Pg248q 
PowerCase
RM850I 780T 
  hide details  
Reply
Spartan
(11 items)
 
  
CPUMotherboardGraphicsRAM
5820k X99-A/3.1USB 980TI XTREME WINDFORCE RIPJAWS IV 2400MHZ 
Hard DriveCoolingOSMonitor
WD 1TB Phobya 360lt kit WINDOWS 10 PRO Pg248q 
PowerCase
RM850I 780T 
  hide details  
Reply
post #6185 of 8545
So I just flashed the BIOS found here: http://www.overclock.net/t/1514085/official-nvidia-gtx-970-owners-club/19520#post_24537064
Tested for about thirty seconds, saw a couple of artifacts, tabbed out. Tried to adjust GPU core/memory values. BSOD. Tried to adjust core frequency by 1mhz. BSOD. Why? Am I not able to adjust the values of custom BIOSs after they have been flashed?



EDIT: Figured it out. Perhaps it was an issue with that particular version of the modded bios but I tried another and changing values no longer causes problems.
Edited by Amblin - 6/26/16 at 3:28pm
post #6186 of 8545
@Mr-Dark, I decided to go with 1080 smile.gif
I hope you will hve the ability to mod the bios soon tongue.gif Well I will be buying 1080 in 1 month anyway so ..... thumb.gif

I'm not sure if it's worth to pay the premium for AIB cards or it's fine to go with reference design and much cheaper.....redface.gif
post #6187 of 8545
Hey Mr Dark. I requested earlier but you were busy so here I go again biggrin.gif Could you adjust mine it is a MSI 980ti 6G gaming on full cover block EKWD.

I currently can go 1471mhz max on 1.23V and 400+ on memory using afterburner. It is a hard limit. I have a pretty avarage card on air I could only reach 1441Mhz with stock voltages. Hope this helps ps if I can reach 1500 i'll be happy!

Can you make it go to 1.275v with no power limit and no boost. My temps are 60C max currently on 1.23V. my gpu has its own dedicated 360 rad but its running low fan speeds.

Thank you!

GM200.zip 152k .zip file
X99 Sabertooth
(0 items)
  
Reply
X99 Sabertooth
(0 items)
  
Reply
post #6188 of 8545
Quote:
Originally Posted by stephen427 View Post

Hey Mr Dark. I requested earlier but you were busy so here I go again biggrin.gif Could you adjust mine it is a MSI 980ti 6G gaming on full cover block EKWD.

I currently can go 1471mhz max on 1.23V and 400+ on memory using afterburner. It is a hard limit. I have a pretty avarage card on air I could only reach 1441Mhz with stock voltages. Hope this helps ps if I can reach 1500 i'll be happy!

Can you make it go to 1.275v with no power limit and no boost. My temps are 60C max currently on 1.23V. my gpu has its own dedicated 360 rad but its running low fan speeds.

Thank you!

GM200.zip 152k .zip file

Wait for his reply but he just did mine for the exact same card.

I also flashed it onto my second card with it with no problems, though its set for 1507 on the gpu, I'm waiting for my EK blocks to arrive
Edited by jord06 - 6/26/16 at 5:16pm
post #6189 of 8545
Hello Mr-Dark

Thanks again for all your help. Everything has been great with the EVGA Hybrid 980 Ti at 1519 up until I played Tomb Raider. For some reason I get little artifacts right on the main character during high action. If I turn down the core clock they go away. No other game has any problem ever though!

So I wonder, is it maybe possible to crank up the voltage a bit on this bios? The core just seems to need a tiny bit of help from more power maybe? Or do you think the answer is just lower the clock?

Here is the bios:

EVGAHybrid----1519---3900.zip 146k .zip file
post #6190 of 8545
Installed the Accelero Hybrid III-140 turn on pc.. and badammm no picture did, i just broke my ******* expensive 1070? tried pluggin the old coolers fans in the gpu:s slot with no success, tried loosening and tightening the heatsink for gpu.. no help there either.. Is anyone familiar with this cooler, haven't tried with the stock cooler yet since it's a ******* nightmare to put back on
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: NVIDIA
Overclock.net › Forums › Graphics Cards › NVIDIA › Nvidia GTX 900 cards custom bios (upon request )