Overclock.net › Forums › Graphics Cards › NVIDIA › Nvidia GTX 900 cards custom bios (upon request )
New Posts  All Forums:Forum Nav:

Nvidia GTX 900 cards custom bios (upon request ) - Page 642

post #6411 of 8701
Quote:
Originally Posted by Mr-Dark View Post


Use Gpu-Z or MSI AB to measure the volt.. yo can push the core clock farther as the voltage capable for that..

Hi Mr Dark,

I flashed back to the stock. I've installed MSI Afterburner and I'll get more info on what my cards can achieve and give that to you to make another custom bios if that's okay? Had a lot of extra heat on the GPU's (the main card was hitting 83c) for not much performance gain.

p.s. you're a champion for doing this smile.gif

EDIT: Mr Dark informed me I was looking at the wrong score. I'm an idiot haha. Performance increase is much better then I thought on the bios!!
Edited by Randomstar - 7/6/16 at 6:27pm
post #6412 of 8701
Can i ask whats the video clock?

post #6413 of 8701

Mr-Dark,

 

   Thanks for helping me with this BIOS.

 

   Per your recommendation, the Nvidia driver is set to Adaptive.

 

   If you can make only the changes that will help mitigate the Perfcap Reason = "VRel.VOp", that should be enough. The Core and Memory speeds can be left at the OEM default.

 

   In GPU-Z, while running Heaven 4.0, the following results occur:

 

      Power Consumption varies from 88 - 97

 

      VDDC is steady at 1.243V

 

     

 

      GM204.zip 136k .zip file

post #6414 of 8701
Hi Mr Dark,

I modified my BIOS a bit, but I'm stumped on voltage. Can you take a look?

GPU-Z Only reports a max voltage of 1.237V. I'm looking to get to 1.25V.

Was hoping my card isn't hardware limited... But I guess you can tell if so.

Thank you!

MSI980TI.zip 152k .zip file
post #6415 of 8701
Quote:
Originally Posted by bigblueshock View Post

Hi Mr Dark,

I modified my BIOS a bit, but I'm stumped on voltage. Can you take a look?

GPU-Z Only reports a max voltage of 1.237V. I'm looking to get to 1.25V.

Was hoping my card isn't hardware limited... But I guess you can tell if so.

Thank you!

MSI980TI.zip 152k .zip file

Which GPU is it, exactly? Model #, please. Are you using GPUz sensors tab? What's it reporting? Are you getting a power limit perf cap in the PerfCap Reason line of GPUz sensors tab? What kind of cooling? Ambient temps? Clocks? Core temp under load?
post #6416 of 8701
Getting
Quote:
Originally Posted by Vellinious View Post

Which GPU is it, exactly? Model #, please. Are you using GPUz sensors tab? What's it reporting? Are you getting a power limit perf cap in the PerfCap Reason line of GPUz sensors tab? What kind of cooling? Ambient temps? Clocks? Core temp under load?

Thanks for quick reply.

GPU Model: MSI GeForce GTX 980 Ti 6GD5T
Using GPU Z Sensor Tab. It's reporting 1.2370V MSI Afterburner also reports 1.2370V
Not getting a Power Limit perf cap. I am getting a VRel, VOp however.

I am using a Corsair H90. Core is maxing out around 58C. Ambient temps in case are under 30 (unfortunately room isn't the coolest). With Boost i'm hitting 1504 MHz, and memory clock is 7,712 MHz

Edit: I have my power limit set to 120% - I just noticed under PerfCap, Pwr does come up, very rarely however. When I had it at 110% it used to come up all the time.
Edited by bigblueshock - 7/6/16 at 8:02pm
post #6417 of 8701
Quote:
Originally Posted by Mr-Dark View Post


OMG BRO!!! redface.gif server problem.. but here is again smile.gif

Hey Mr Dark,

I've now bench marked properly after we spoke and the OC is awesome! 35% increase in performance in Heaven and a great increase across the board. I'm so stoked! Thank you so much smile.gif !

I just wanted to double check my lower temps with you, the main card is idling around 51c and the second card is 35c with Nvidia power mode set to either optimal power/adaptive. In high performance mode they idle at 56-59c and 51c. With the custom fan profile turning the fan on at 45c is it fine for the first card to idle with the fan on at 8% and temp at 51c? I only ask as the stock MSI bios had the fans only turn on once the cards hit 60-65c so I'm used to the cards just sitting there silently with the fans off.

Would it be possible to grab another custom profile with the fan set to start at the same temp they did originally or a temp that will let them be off at idle and then have them climb as you did on the custom fan profile? I wouldn't mind comparing the idle temps and noise etc.. I liked having the fans not spinning when I was just web browsing, doing programming and other light work.

P.s. thanks so much for your work by the way, so impressed!
Edited by Randomstar - 7/7/16 at 2:50am
post #6418 of 8701
Quote:
Originally Posted by spyda123 View Post

Hello

Please make me a Custom Bios for my KFA 980TI HOF

Clock: 1450
Ram: ?
Fan Speed: 1000rpm

I Think voltage is ok at 1.218

Thanks for that ;-)

Greetz


Original.zip 152k .zip file

Fan Speed in Idle ;-)
post #6419 of 8701
Thread Starter 
Quote:
Originally Posted by Randomstar View Post

Hi Mr Dark,

I flashed back to the stock. I've installed MSI Afterburner and I'll get more info on what my cards can achieve and give that to you to make another custom bios if that's okay? Had a lot of extra heat on the GPU's (the main card was hitting 83c) for not much performance gain.

p.s. you're a champion for doing this smile.gif

EDIT: Mr Dark informed me I was looking at the wrong score. I'm an idiot haha. Performance increase is much better then I thought on the bios!!

Glad to hear that.. as i told yo.. try to push at stock bios and on my bios.. let me know which better for yo so i can help..

if the card's stable at 1506mhz and stock voltage (1.218v) i can adjust the bios for that, no problem thumb.gif
Quote:
Originally Posted by karserasl View Post

Can i ask whats the video clock?


No idea about that.. its something from Hwinfo64...
Quote:
Originally Posted by uihdff View Post

Mr-Dark,

   Thanks for helping me with this BIOS.

   Per your recommendation, the Nvidia driver is set to Adaptive.

   If you can make only the changes that will help mitigate the Perfcap Reason = "VRel.VOp", that should be enough. The Core and Memory speeds can be left at the OEM default.

   In GPU-Z, while running Heaven 4.0, the following results occur:

      Power Consumption varies from 88 - 97

      VDDC is steady at 1.243V

     

      GM204.ROM.zip 136k .zip file

Hey there

here yo go

GM204-----Dark.zip 136k .zip file
Dark.zip (136k. zip file)

Core clock 1405mhz & stock memory clock & 1.250v & higher TDP limit & boost off..

use any OC software to push the clock farther thumb.gif
Quote:
Originally Posted by bigblueshock View Post

Hi Mr Dark,

I modified my BIOS a bit, but I'm stumped on voltage. Can you take a look?

GPU-Z Only reports a max voltage of 1.237V. I'm looking to get to 1.25V.

Was hoping my card isn't hardware limited... But I guess you can tell if so.

Thank you!

MSI980TI.zip 152k .zip file

Here yo go brotha

MSI980TI----Dark.zip 152k .zip file

Core clock 1506mhz & 7700mhz memory & 1.250v & higher TDP limit & boost off..

rest ant OC software yo have there and flash my bios.. keep in mind my bios need Zero tweak from yo thumb.gif
Quote:
Originally Posted by Randomstar View Post

Hey Mr Dark,

I've now bench marked properly after we spoke and the OC is awesome! 35% increase in performance in Heaven and a great increase across the board. I'm so stoked! Thank you so much smile.gif !

I just wanted to double check my lower temps with you, the main card is idling around 51c and the second card is 35c with Nvidia power mode set to either optimal power/adaptive. In high performance mode they idle at 56-59c and 51c. With the custom fan profile turning the fan on at 45c is it fine for the first card to idle with the fan on at 8% and temp at 51c? I only ask as the stock MSI bios had the fans only turn on once the cards hit 60-65c so I'm used to the cards just sitting there silently with the fans off.

Would it be possible to grab another custom profile with the fan set to start at the same temp they did originally or a temp that will let them be off at idle and then have them climb as you did on the custom fan profile? I wouldn't mind comparing the idle temps and noise etc.. I liked having the fans not spinning when I was just web browsing, doing programming and other light work.

P.s. thanks so much for your work by the way, so impressed!

Hello there

That's normal as i adjust the fan start point from 65c to 45c.. no problem here is same bios but with 65c start point..

MSI970--SLI--Fan--Start--65c.zip 273k .zip file

did yo tried to push the core farther ? I think yo can push up to 1540 or 1550mhz as the ASIC is good on your card's.. smile.gif

let me know if yo need something
Quote:
Originally Posted by spyda123 View Post

Fan Speed in Idle ;-)

Sure, here yo go

980Ti--KFA---Darkl.zip 152k .zip file

Core clock 1455mhz & 3.7ghz memory & 1.212v & higher TDP limit & boost off & 1k fan rpm in IDLE..

btw that card is voltage locked at 1,212v from the bios rolleyes.gif
   
The White Dark
(16 items)
 
CPUMotherboardGraphicsRAM
Intel Core I7 7700k Quad Core OC 5.1Ghz 1.344v Asus Z270 IX Code Nvidia GTX Titan-X Pascal 12GB Corsair Vengeance RGB 16GB 3000/C15 
Hard DriveHard DriveCoolingOS
Samsung Nvme 960 Evo 500GB Pny CS1311 480GB ThermalTake Water 3.0 Extreme 360m + Triple Rin... Windows 10 Pro 64Bit 
MonitorKeyboardPowerCase
Asus VG24QE 1080p 144Hz Razer Blackwidow Chroma  Evga SuperNova 850 B2 Corsair 780T White + Asus Front Base  
Mouse
Steelseries Rival 100  
CPUMotherboardGraphicsGraphics
Intel Core i7-5960X Haswell-E 8-Core 3.0GHz LGA... MSI X99A GODlike Gaming Extreme Gaming Intel X99 MSI GTX 1070 Gaming-X 8GB SLI MSI GTX 1070 Gaming-X 8GB SLI 
RAMHard DriveHard DriveHard Drive
Corsair Vengeance led 64GB 8*8GB 2666Mhz Samsung 950 Pro 256GB ( Boot )  Samsung 850 Evo 1TB  Samsung 850 Evo 1TB  
CoolingOSMonitorKeyboard
Corsair H110i + SP140 Push/Pull Windows 10 Pro 64Bit Asus PG278Q 2560*1440p 144hz Gsync Razer BlackWidow Chroma Clicky Mechanical Gamin... 
PowerCaseMouseMouse Pad
Evga SuperNova 1300G + Red Sleeved Cabel's Corsair 780T Black + Nzxt HUe +  Razer Mamba Tournament Edition - Professional G... Corsair Extended pad 
Audio
Creative Sound Blaster-Z 
CPUMotherboardGraphicsRAM
Intel Core I7 6700k Skylake @4.7Ghz 1.320v  Gigabyte Z170X-Gaming 7 Evga GTX 1070 8GB Superclocked ACX 3.0  Corsair 16GB 3200Mhz 
Hard DriveHard DriveHard DriveHard Drive
Samsung 950 Pro 256GB in Raid 0 Samsung 950 Pro 256GB in Raid 0 Samsung 850 Evo 1TB  Samsung 850 Evo 1TB  
CoolingOSMonitorKeyboard
Corsair H110i + SP140 white fan's Microsoft Windows 10 Pro 64bit Asus PG278Q 2560X1440p 144hz Gsync Razer BlackWidow Chroma RGB Mechanical Gaming 
PowerCaseMouseMouse Pad
Evga SuperNova 1300 G2 Nzxt H440 Plus white  Razer Mamba Tournament Edition XXXL Pad 
  hide details  
Reply
   
The White Dark
(16 items)
 
CPUMotherboardGraphicsRAM
Intel Core I7 7700k Quad Core OC 5.1Ghz 1.344v Asus Z270 IX Code Nvidia GTX Titan-X Pascal 12GB Corsair Vengeance RGB 16GB 3000/C15 
Hard DriveHard DriveCoolingOS
Samsung Nvme 960 Evo 500GB Pny CS1311 480GB ThermalTake Water 3.0 Extreme 360m + Triple Rin... Windows 10 Pro 64Bit 
MonitorKeyboardPowerCase
Asus VG24QE 1080p 144Hz Razer Blackwidow Chroma  Evga SuperNova 850 B2 Corsair 780T White + Asus Front Base  
Mouse
Steelseries Rival 100  
CPUMotherboardGraphicsGraphics
Intel Core i7-5960X Haswell-E 8-Core 3.0GHz LGA... MSI X99A GODlike Gaming Extreme Gaming Intel X99 MSI GTX 1070 Gaming-X 8GB SLI MSI GTX 1070 Gaming-X 8GB SLI 
RAMHard DriveHard DriveHard Drive
Corsair Vengeance led 64GB 8*8GB 2666Mhz Samsung 950 Pro 256GB ( Boot )  Samsung 850 Evo 1TB  Samsung 850 Evo 1TB  
CoolingOSMonitorKeyboard
Corsair H110i + SP140 Push/Pull Windows 10 Pro 64Bit Asus PG278Q 2560*1440p 144hz Gsync Razer BlackWidow Chroma Clicky Mechanical Gamin... 
PowerCaseMouseMouse Pad
Evga SuperNova 1300G + Red Sleeved Cabel's Corsair 780T Black + Nzxt HUe +  Razer Mamba Tournament Edition - Professional G... Corsair Extended pad 
Audio
Creative Sound Blaster-Z 
CPUMotherboardGraphicsRAM
Intel Core I7 6700k Skylake @4.7Ghz 1.320v  Gigabyte Z170X-Gaming 7 Evga GTX 1070 8GB Superclocked ACX 3.0  Corsair 16GB 3200Mhz 
Hard DriveHard DriveHard DriveHard Drive
Samsung 950 Pro 256GB in Raid 0 Samsung 950 Pro 256GB in Raid 0 Samsung 850 Evo 1TB  Samsung 850 Evo 1TB  
CoolingOSMonitorKeyboard
Corsair H110i + SP140 white fan's Microsoft Windows 10 Pro 64bit Asus PG278Q 2560X1440p 144hz Gsync Razer BlackWidow Chroma RGB Mechanical Gaming 
PowerCaseMouseMouse Pad
Evga SuperNova 1300 G2 Nzxt H440 Plus white  Razer Mamba Tournament Edition XXXL Pad 
  hide details  
Reply
post #6420 of 8701
Hello all (& Mr Dark).

I posted a while back before doing any Bios modding - since then I managed to get a bios mod stable and working fine.

I've continued to try and get this "better" with no success (i'm not great at this)

Currently, I have a stable boost clock of 1,405 MHz and a memory clock of 1,823 MHz

Without "more bios tweaking" this is the best I've been able to get without instability.

Temps reach a max of 49 on both cards.

Both cards are "reference" 980ti's but modded using the EVGA Hydro cooler and a ASIC of 69%

Afterburner reports max voltage as just a shade under 1200

Bios I'm currently using is attached below.

Question is - have I hit the wall, or is there further tweaks / gains to be made?

BackupMOD.zip 152k .zip file

Thanks!
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: NVIDIA
Overclock.net › Forums › Graphics Cards › NVIDIA › Nvidia GTX 900 cards custom bios (upon request )