Originally Posted by seikon23
MR-Dark thank you , now its 100% solid none of the benchmarks and game's that i had problems before with driver crashing do that now , its working like a charm , have a beer from me
Glad to hear that bro
Beer is very good specially on weekend with babe
Originally Posted by fjordiales @Mr-Dark
, thank you for the bios. I was experimenting prior to your bios. I was wondering if this looks ok to you. Curious about low volts with 425w TDP. Basically I want it to be efficient in SLI and worried about temps but I'm about to try something else on my case.
1175.zip 146k .zip file
I'm still researching the significance of high ASIC. Also, the vid you have in OP is helpful. I will definitely keep your bios as a baseline. Again, thank you for your time.
As i had 4 * MSI 980 Ti Golden.. that card is good but the stock cooler is garbage.. not enough for SLI setup...
i can see good bios there.. 1455mhz @1.18v not bad at all as that still low volt
how your temp under load ?
Originally Posted by OhSleeper
Yo, dark i have gtx 970 ssc 2.0+ 3975KR, the highest boost clock i can get is 1518, that's with 113 on the core clock, at 115 i start to artifact at 117 i crash no matter what (all ran in firestrike btw).
I believe i'm having voltage issues, my max tdp is set to 115% i'm only hitting 105%, not quite sure if that's good or bad. Anyways would you mind bumping my voltage up so i can do some more testing? I'm on air with the acx 2.0+ cooler so nothing crazy just what you see fit. Thanks!
970ssc2.0.zip 136k .zip file
Sure, here yo go
970ssc2.0---OhSleeper-------Dark.zip 136k .zip file
Dark.zip (136k. zip file)
Core clock 1519mhz & 3.7ghz memory & 1.275v & higher TDP limit & boost off..
the ACX cooler can keep the card under 80c even at 1.275v.. no worry
Originally Posted by dippadui
could it be possible to modify my current bios so that speed without boost is 1450mhz,and litle more power so there is no perfcaps... other settings like it is.
thank you very much.
this is current bios that i use --->
970F51DP-MAX-UNLEASHED-REL1.1.ROM.zip 136k .zip file
Here yo go
GTX970---dippadui----Dark.zip 136k .zip file
Core clock 1455mhz & 3.7ghz memory & 1.275v & higher TDP limit & boost off..
yo can push the core farther as the voltage capable for that now..
Originally Posted by hajvan
I'm stuck at 1366 boost with my inno3d ichill ultra x3
if I increase the clock by just a little it chrashes in benchmarks.
could you take a look at the voltages and the tdp limit.
It would be nice if I could hit around 1490 ish on core and a decent mem clock.
inno3d.zip 152k .zip file
give this a try
inno3d------hajvan-----Dark.zip 152k .zip file
Dark.zip (152k. zip file)
Core clock 1405mhz & 3.8ghz memory & 1.255v & higher TDP limit & boost off..
flash that bios and use any OC software to push the core farther.. once yo find the limit report back so i can adjust the bios for the daily profile
Originally Posted by brandon02852
Do you have a 221Kb bios of this? Apparently it's not safe to flash my TITAN X (purchased directly from nVidia on launch day) with anything other than a 221Kb bios. Thank you!!!
Upload your bios and i will be more than happy to help yo
Originally Posted by Grimz Reeper
Hi Mr Dark!
I currently have a Gigabyte 980Ti Xtreme at stock clocks (1241/1342 GPU Clock and 7202 Memory Clock)
what are the maximum clocks i can go? what voltage needs to be applied? what power target?
I am looking for a decent overclock, but not too sure what power target and voltage to apply to the memory clock and gpu clocks i set.
No one can tell yo the max oc.. its the silicon and the luck all the time
on the stock bios Max out the voltage/TDP slider's and push the core clock until yo crash.. then do the same for the memory..
Aim for + 500mhz on the memory and around 1500mhz on the core.. the voltage should be 1.24v when yo max the slider.. also yo can drop the stock bios here so i can help yo better
Originally Posted by tretijrebenok
@Mr-Dark i need help, for flashing a new clean bios for my Inno 3d gtx 980 herculez x3, i just know the commands for flash, i put off write protection, from dos( Windows) and from dos(usb key bios)
and nothing happened, i flash a lot of time, in gpuz when i flash the serial number of the bios appears, after a reboot, i don t see nothing, im using a dual gpu solution, so in the main slot im using an old ati 5750, and in the secondary slot pci e x4 im using the gtx 980, please help, i don t want to lost 500 dollars of videocard.
Use Nvflash from windows..-- this version
Use this command
nvflash -- list yo should see the AMD card as Card 0 and Nvidia card as card 1 use this command
nvflash --index=1 GM204.rom assuming the stock bios name is GM204.rom...
that should revive the card without any problem..
if Nvflash didn't see both card try different version from that thread
If no go, I can join yo via Teamviewer to help yo no worry
let me know if yo need anything