Originally Posted by sunnyhj
Yeah i'll try that, Currently i'm running stable at 1438 core and 1846 memory @1.212v.
My current bios is already attached in the first post
Sure, here yo go
BIOS1----sunnyhj-----Dark.zip 136k .zip file
Dark.zip (136k. zip file)
Core clock 1443mhz & 3.7ghz memory & 1.212v & higher TDP limit & boost off..
Originally Posted by fat4l
Ugh...I'm tempted to do the hard volt mod. Der8auer will be uploading 1080 FE mod video soon.
Do you personally think 1.2-1.25V is safe voltage for the chip for daily use and under water ~40C load ?
Do you think increasing voltage to 1.25v helps with OC ?
I'm sure, Pascal wont scale with voltage.. even worse than Maxwell
stock voltage on Pascal is 1.050v while increasing that to 1.08v give 10-30mhz not more.. but we should try higher volt and higher TDP limit...
1.250v should be fine if the temp under control..
Originally Posted by steveTA1983
you modded a 970m bios for me a few days ago and it works great, but i was wondering if you could mod this one and only modify the core clock so it runs at 1260mhz (or around it) instead of 1037mhz and do nothing with the voltage. i tried to mod it myself, but it just wouldnt flash (your bios's have the magic touch
). here is GPU-Z and the zipped file if you can get around to it. thanks again man!!
scc.gif 21k .gif file
GM204.zip 66k .zip file
Sure bro, here yo go
GM204---steveTA1983-----Dark.zip 66k .zip file
Dark.zip (66k. zip file)
Core 1253mhz @0.993v...
Originally Posted by asport
Now I have got no idea whats going on. This bios made it even worse, I have noticed you have put the same voltage for all states which in theory should sort out the problem but for some reason now is crashing in idle but also when I run any program which stress the card it looks like clocks stays on the lower level - 135MHz for core and 324 for memory.
Well I think this must be a hardware issue and I might just need a new card.
Hmmm, its not bios problem as i force the card to stay at 1.212v all time... same problem happen at stock bios ? If yes yo can RMA that card as something wrong there..
Originally Posted by Cloudstrife
Then I can give from msi afterburner +87 without problems? For you, what is best overvolt for daily use?
No, once we set specific voltage on the bios no way to change that from any OC software...
For Maxwell card's up to 1.275v is fine, if yo can keep it under 80c
Originally Posted by Kaltenbrunner
My MSI 980 ti costs so much too me that I don't OC it all. I'm not sure what of the many games I have would get a help from trying to OC a 980 Ti. But compared to the last few crossfire problems, a 980ti is simple. And IDK programming/etc.........but yeah, whatever the reasons, I've had way less hassle since going from 290 CF to a 980 TI. Its sad when games I replay still aren't what I wish they were, like some levels of StarCraft2 that get super slow
OC is extra performance for free.. AMD CF is very bad.. as one coming from 280X CF and some HD 7770 & 7870 & 7950 & 7970 & 290...
No AMD anymore.... its garbage company...