Overclock.net › Forums › Graphics Cards › NVIDIA › Nvidia GTX 900 cards custom bios (upon request )
New Posts  All Forums:Forum Nav:

Nvidia GTX 900 cards custom bios (upon request ) - Page 681

post #6801 of 8701
Quote:
Originally Posted by Cloudstrife View Post

WOW! With ASIC 67,5% I get 1506 mhz on core clock for MSI gaming gtx 970. I thought more ASIC better OC.

That's right about where 67% ASIC should be....
post #6802 of 8701
Quote:
Originally Posted by kdgamer View Post

Originally Posted by Mr-Dark View Post

This the best i can do for yo

KDSTRIX----Dark.zip 147k .zip file

Core clock 1405mhz & 8ghz memory & 1.212v & higher TDP limit & boost off & No throttle

flash that bios and make sure its stable at the above setting then yo can push it farther from a


Hello, can anyone help me here? I flashed the above bios last night to my 980ti strix and it flashed fine, however it was not stable and would not make it through a pass of heaven. Now I have tried to flash my original bios back, and every time i get the:

BCRT Error Certificate 2.0 verification failed

ERROR: BIOS cert 2.0 Verification Error, Update failed.

Im using the latest version of NVFlash-All-Checks-Bypassed. any help would be appreciated
Thanks.
post #6803 of 8701
Quote:
Originally Posted by superkeest View Post

Hello, can anyone help me here? I flashed the above bios last night to my 980ti strix and it flashed fine, however it was not stable and would not make it through a pass of heaven. Now I have tried to flash my original bios back, and every time i get the:

BCRT Error Certificate 2.0 verification failed

ERROR: BIOS cert 2.0 Verification Error, Update failed.

Im using the latest version of NVFlash-All-Checks-Bypassed. any help would be appreciated
Thanks.

What flash command did you use?

This his how I done it, including going back to the original:

nvflash --protectoff

nvflash -6 romname.rom

nvflash --protecton

Make sure you disable the graphics card in device manager before hand though and reboot after the process.
post #6804 of 8701
Quote:
Originally Posted by kdgamer View Post

What flash command did you use?

This his how I done it, including going back to the original:

nvflash --protectoff

nvflash -6 romname.rom

nvflash --protecton

Make sure you disable the graphics card in device manager before hand though and reboot after the process.

Thanks i will try when i get home.
post #6805 of 8701
Hi can anyone modify the voltage on my 980 Ti G1? Even if i add +87 it always locks to 1,23V,i'd like it to be modified to 1,25V. Thanks.

GM200.zip 152k .zip file
post #6806 of 8701
Quote:
Originally Posted by Mr-Dark View Post

Hey there

here yo go

GM206----albmm----Dark.zip 149k .zip file

Core 1317mhz & stock memory & 1.218v & higher TDP limit & boost off..
Glad to hear that bro.. Enjoy it my pleasure smile.gif
Thank you very much, friend.

I have a question for you:

Reviews said that this card (GTX 950) doesn't need any voltage increase for overcloking.

Considering I´m not going to speed up the clock speed over those 1317 Mhz, Do you recommend any voltage increase to get better stability?


Thanks again.
post #6807 of 8701
Hi @Mr-Dark, would you mod my bios?

It's a Evga 960 ssc acx2.0 2gb

Actually i have a stable oc gpu 1500 mhz and 2000mhz memory. im reading 1.212-245 max volt at some situations, temps are fine, im on stock air. I leave it in your hands.

Mainly i want to:

-Is it possible to change p2state values to the most powerfull values?. This is because i maily use octane as gpu render, and i'm not getting my overclock over there, when i monitor the render, it uses "stock" evga speeds.

-150-200 tdp

-disable boost

- anything mr dark says.


GM206.zip 136k .zip file

Thnks in advance
Edited by patocr - 7/29/16 at 10:52pm
post #6808 of 8701
Question, can i overclock with the custom bios that dark sends ? if yes, it would be great dark if u can send one with this settings max voltage and power limit
also, does the card idle how it should ? does the card stay to 1177 mhz when i dont need all the power like on the default bios ? 980STRIX.zip 137k .zip file
post #6809 of 8701
Hello,

I have a GTX 970 KFA2 HOF.

I want to set these clocks: Core 1470MHZ, Memory: 7700MHZ.
Voltage: The more optimized for overclock.
Fan curve: fan is 10% faster than the temperature (ex: 50°C fan is 60%).

Thank you! biggrin.gif

970_hof.zip 136k .zip file
post #6810 of 8701
Hey I would like to have a custom voltage Bios made. I have a 980Ti Classified. I would like the voltages to be at 1.28V sonic.gif I'd like to do the actual overclocking myself if possible, I find it fun.biggrin.gif

STOCKUNLOCKEDGM200.rom.zip 147k .zip file

This Bios is MY stock Bios with the locked voltages unlocked
Edited by Night-Killer - 7/30/16 at 7:06pm
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: NVIDIA
Overclock.net › Forums › Graphics Cards › NVIDIA › Nvidia GTX 900 cards custom bios (upon request )