Overclock.net › Forums › Graphics Cards › NVIDIA › Nvidia GTX 900 cards custom bios (upon request )
New Posts  All Forums:Forum Nav:

Nvidia GTX 900 cards custom bios (upon request ) - Page 702

post #7011 of 8561
Quote:
Originally Posted by cyris69 View Post

Thanks a bunch Dark! Worked perfectly.

I did notice when changing to adaptive power after the computer restart that it still ran max settings. However, all I had to do was run CRU's restart64 to restart my graphics driver and all went to working properly.

For anyone who'd like this device restarter you can get it here: http://www.monitortests.com/forum/Thread-Custom-Resolution-Utility-CRU just use the restart64 exe in the zip.

Does you're voltage reduce when you are idle along with the core clock?
post #7012 of 8561
Quote:
Originally Posted by homingmystic View Post

Does you're voltage reduce when you are idle along with the core clock?

Yes the voltage drops to ~0.80v at idle and my core to around 125-145hz. Then it revs up to 1.27v and full clock or in-between in steps as needed. Memory just stays at 4001 at all times. However that is by request, otherwise it with previous bios everything is at said clock and voltage at all times.
Edited by cyris69 - 8/19/16 at 7:09am
post #7013 of 8561
Quote:
Originally Posted by cyris69 View Post

Yes the voltage drops to ~0.80v at idle and my core to around 125-145hz. Then it revs up to 1.27v and full clock or in-between in steps as needed. Memory just stays at 4001 at all times.

Damn thats what i would like my voltage to do. Do you just have your nvidia power mode to adaptive, or have you set something else for it to drop?

[EDIT] Ah what is it i would have to ask for to get the voltage to drop like you're setup?
Edited by homingmystic - 8/19/16 at 7:16am
post #7014 of 8561
Quote:
Originally Posted by homingmystic View Post

Damn thats what i would like my voltage to do. Do you just have your nvidia power mode to adaptive, or have you set something else for it to drop?

Unless you specify to Mr. Dark that you want throttling then it will otherwise your bios will be made to where it just stays at full specs always even when idle which is useful for benchmarking rather than a daily driver. Either way doesnt matter just one creates a lot more heat idling than the other way.

With throttling I see an idle of 28-29c vs without at idle 36-39c.
post #7015 of 8561
Quote:
Originally Posted by cyris69 View Post

Yes the voltage drops to ~0.80v at idle and my core to around 125-145hz. Then it revs up to 1.27v and full clock or in-between in steps as needed. Memory just stays at 4001 at all times. However that is by request, otherwise it with previous bios everything is at said clock and voltage at all times.
Quote:
Originally Posted by cyris69 View Post

Unless you specify to Mr. Dark that you want throttling then it will otherwise your bios will be made to where it just stays at full specs always even when idle which is useful for benchmarking rather than a daily driver. Either way doesnt matter just one creates a lot more heat idling than the other way.

With throttling I see an idle of 28-29c vs without at idle 36-39c.

Ok thanks for the info! i would like the throttling as im using it as my daily driver and not always using gpu intensive programs.
post #7016 of 8561
Quote:
Originally Posted by cyris69 View Post

Thanks a bunch Dark! Worked perfectly.

I did notice when changing to adaptive power after the computer restart that it still ran max settings. However, all I had to do was run CRU's restart64 to restart my graphics driver and all went to working properly.

For anyone who'd like this device restarter you can get it here: http://www.monitortests.com/forum/Thread-Custom-Resolution-Utility-CRU just use the restart64 exe in the zip.

I apologize for going off topic but what would you use this program for?
Is it not already possible to change different resolutions and refresh rates through either the control panel of the graphics card or through windows? Albeit there are not many options for screen resolution in windows but I never use anything but 1920x1080 (24 inch monitors).
The Dark Knight
(25 items)
 
  
CPUMotherboardGraphicsRAM
i7 4930k ASUS Rampage IV Black Ed EVGA GTX 1070 SC ACX 3.0 G.Skill Trident X Series 32GB (4 x 8GB) DDR3-2133 
Hard DriveHard DriveHard DriveHard Drive
Samsung 840 Pro Western Digital BLACK SERIES 7200RPM San Disk Ultra II Seagate 4TB Gaming SSHD 
Optical DriveCoolingCoolingCooling
LG Blu Ray 16x Multi Disc Swiftech H 240-X Watercool Heatkiller IV Pro Clean Acrylic Swiftech H 140-X 
CoolingOSMonitorMonitor
Watercool Heatkiller IV Pro Nickel/Black 1070 MS Windows 10 Pro Vizio 24" 1080p TV  AOC G2460PG 24" 1ms (GTG) 144 Hz Gaming Monito... 
KeyboardPowerCaseMouse
Corsair K95 RGB EVGA G2 1000w Gold Plus Phantom 820 Black Logitech G502 Proteus Core 
Mouse PadAudioAudioOther
None Logitech z906 5.1 surround speaker system Sound Blaster Zx NZXT Hue+  
Other
NZXT Grid+ V2 
  hide details  
Reply
The Dark Knight
(25 items)
 
  
CPUMotherboardGraphicsRAM
i7 4930k ASUS Rampage IV Black Ed EVGA GTX 1070 SC ACX 3.0 G.Skill Trident X Series 32GB (4 x 8GB) DDR3-2133 
Hard DriveHard DriveHard DriveHard Drive
Samsung 840 Pro Western Digital BLACK SERIES 7200RPM San Disk Ultra II Seagate 4TB Gaming SSHD 
Optical DriveCoolingCoolingCooling
LG Blu Ray 16x Multi Disc Swiftech H 240-X Watercool Heatkiller IV Pro Clean Acrylic Swiftech H 140-X 
CoolingOSMonitorMonitor
Watercool Heatkiller IV Pro Nickel/Black 1070 MS Windows 10 Pro Vizio 24" 1080p TV  AOC G2460PG 24" 1ms (GTG) 144 Hz Gaming Monito... 
KeyboardPowerCaseMouse
Corsair K95 RGB EVGA G2 1000w Gold Plus Phantom 820 Black Logitech G502 Proteus Core 
Mouse PadAudioAudioOther
None Logitech z906 5.1 surround speaker system Sound Blaster Zx NZXT Hue+  
Other
NZXT Grid+ V2 
  hide details  
Reply
post #7017 of 8561
Quote:
Originally Posted by Madmaxneo View Post

I apologize for going off topic but what would you use this program for?
Is it not already possible to change different resolutions and refresh rates through either the control panel of the graphics card or through windows? Albeit there are not many options for screen resolution in windows but I never use anything but 1920x1080 (24 inch monitors).
I do overclocking of my 1440p monitor as well. It's just a useful program to restart crashed display drivers. So after I flashed the revised BIOS then restarted PC I went and change power setting to adaptive but it didn't start throttling. So I just had an idea and ran the display driver reset tool and bam it started throttling. Granted another restart may have worked as well.
Edited by cyris69 - 8/19/16 at 7:31am
post #7018 of 8561
Hello again Mr-Dark

I have tried to test few of the custom bios you made but seem's this card can't handle 1500mhz core in all games. Sometimes I get driver crash and usually after first crash the card isn't stable before I reboot(continuously crashes). Even in CS:GO I get core clock dropping randomly. Could you edit bios to have 1450mhz core and 2000mhz memory? And do you think my card just can't handle higher clocks or is it something software related?

GM200original.zip 152k .zip file
post #7019 of 8561
Thread Starter 
Quote:
Originally Posted by jdkpe View Post

thank you for your reply mr dark here is the re uploaded file
GM204.zip 137k .zip file

Broo, are yo sure that stock bios ? rolleyes.gif


Quote:
Originally Posted by needyourhelp View Post

Hello Mr. Dark,

actually 1.199V works very well for me for 1460/2000. But I would like to know,if I can use these settings with less voltage.

And I want to know which settings I can use with 1.23V,so IF I can reach 1500 on GPU.

So is there no chance that I can change Voltage via Afterburner?

Or would it be better if there are 2 different Mod BIOS. One with 1460/2000@1.199V and One with 1.23V ?!?

Hello there

the only way to push the voltage is the bios.. here is 2 bios as yo request

GM200---needyourhelp-----Dark.zip 304k .zip file
Dark.zip (304k. zip file)

Quote:
Originally Posted by Lucifer1945 View Post

Mr. Dark. voltage slider is already unlocked in asus GPUtweak. As such im not voltage bound. I just need limit removed on clock and if possible that bump up in threshold to throttling, thanks.

1019-1044mv is the range. I have checked, and I can hit apply and the settings stick. That said thats the highest load I can get it to go since witcher 3 at 4k everything maxed out, the gpuz menu dissapears on my other monitor regardless of what settings for window borderless or fullscreen, so thats the most load I know how to put it under. CPU bound in alien isolation I think (DX11), and I dont think furmark is still a thing. Shouldnt be an issue considering I have some wiggle room in regards to voltage. The default voltage of 1019mv is stable at 1261. If I max out the voltage slider I should be able to hit with it unlocked a hair over 1300 stable which was my goal.

Edit:
Furmark still exists? God its old lol.
Gotit.gif 14k .gif file

100% load.

Okay, here is what i can do

1617-----Lucifer1945----Dark.zip 139k .zip file
Lucifer1945----Dark.zip (139k. zip file)

Core 1266mhz & 1.043v & boost off..

don't use Furmark on mobile card.. the vrm cooling not enough for that thumb.gif
Quote:
Originally Posted by cyris69 View Post

Thanks a bunch Dark! Worked perfectly.

I did notice when changing to adaptive power after the computer restart that it still ran max settings. However, all I had to do was run CRU's restart64 to restart my graphics driver and all went to working properly.

For anyone who'd like this device restarter you can get it here: http://www.monitortests.com/forum/Thread-Custom-Resolution-Utility-CRU just use the restart64 exe in the zip.

Glad to hear that.. I do clean install for the driver after flashing the final OC bios to keep it smooth wink.gif
Quote:
Originally Posted by KillerBee33 View Post

Latency huh rolleyes.gif My new obsession is Need for Speed which runs perfectly. I'm not even in the mood for OC , running stock in games, havent seen a single issue so far thumb.gif Some 4K shots biggrin.gif


this ? biggrin.gif

http://www.overclock.net/t/1605618/ongoing-pascal-latency-problems-hotfix-doesnt-work-for-everyone
Quote:
Originally Posted by homingmystic View Post

Thank you for the Bios Dark!

Is Is there any chance you could set the core and memory clocks to stock so i can edit them within AB as i like the control? Also does having boost off make the card run at its highest speed all the time? as mine is always running at 1506, which isn't a major problem, but would like to ramp down when not in use, this also means the voltage is at 1.2550 constant. Voltage bump seems to have helped me though! how would i have access to the voltage slider, within AB if enabled?



Thanks again! I will link both Bios stock and edited encase it is easier for you to use one or the other.

Stock 980ti Bios:

GM200Stock.zip 152k .zip file

Custom 980ti Bios:

GM200Stock----homingmystic----Dark.zip 152k .zip file

[EDIT] After using adaptive in Nvidia control panel the core clock drops to 1215 when idle, but the VDDC doesn't. Not too sure if after using a custom bios it is suppose to drop or not tongue.gif I have attached a image to show:

Hello

A clean install for the driver should fix the high IDLE clock thumb.gif

boost off is the way to go... trust me boost ON and Aircooled Ti is bad idea smile.gif
Quote:
Originally Posted by SPeRii View Post

Ok man. Disable boost. Sry for quote. Im on my phone. 1450 8400. all maxed out on strix

Here yo go bro

GM204----SPeRii----Dark.zip 137k .zip file

As per your request wink.gif
Quote:
Originally Posted by Philippk View Post

I think that could be an good start to begin with smile.gif

Here yo go

GM204-------Philippk---------Dark.zip 136k .zip file
Philippk
Dark.zip (136k. zip file)

Core clock 1405mhz & stock memory & 1.275v & higher TDP limit & boost off
Quote:
Originally Posted by zajiz View Post

Hi again Mr-Dark,
That custom bios didn't work any better redface.gif 1405MHz seems to be the limit for this chip, no matter what. My card can actually run 1405MHz @1.1875V, and increasing voltage to the GPU doesn't seem to make any difference. Games and benchmarks freeze in a few seconds, and I have to ctrl+alt+del to desktop. GPU-Z shows that there is no perfcaps.

Any more ideas or do I just have to deal with the fact that 1405 is the best my card can go?

Its known problem with Maxwell card's.. once yo hit the wall nothing can help to pass rolleyes.gif

the best is flash the stock bios again and make sure if 1405mhz is full stable at 1.187v ? so maybe we can make custom bios for that to avoid throttle ?
Quote:
Originally Posted by cyris69 View Post

Unless you specify to Mr. Dark that you want throttling then it will otherwise your bios will be made to where it just stays at full specs always even when idle which is useful for benchmarking rather than a daily driver. Either way doesnt matter just one creates a lot more heat idling than the other way.

With throttling I see an idle of 28-29c vs without at idle 36-39c.

All custom's bios allow the card to downclock while in IDLE..

just make sure Nvidia power setting at Adaptive or a clean install for the driver is the best to fix that thumb.gif
Quote:
Originally Posted by puuhapeku View Post

Hello again Mr-Dark

I have tried to test few of the custom bios you made but seem's this card can't handle 1500mhz core in all games. Sometimes I get driver crash and usually after first crash the card isn't stable before I reboot(continuously crashes). Even in CS:GO I get core clock dropping randomly. Could you edit bios to have 1450mhz core and 2000mhz memory? And do you think my card just can't handle higher clocks or is it something software related?

GM200original.zip 152k .zip file

Hello there

what about the voltage ? did yo try an 1.275v bios ? how your temp ? ASIC ?
   
The White Dark
(16 items)
 
CPUMotherboardGraphicsRAM
Intel Core I7 7700k Quad Core OC 5.1Ghz 1.344v Asus Z270 IX Code Nvidia GTX Titan-X Pascal 12GB Corsair Vengeance RGB 16GB 3000/C15 
Hard DriveHard DriveCoolingOS
Samsung Nvme 960 Evo 500GB Pny CS1311 480GB ThermalTake Water 3.0 Extreme 360m + Triple Rin... Windows 10 Pro 64Bit 
MonitorKeyboardPowerCase
Asus VG24QE 1080p 144Hz Razer Blackwidow Chroma  Evga SuperNova 850 B2 Corsair 780T White + Asus Front Base  
Mouse
Steelseries Rival 100  
CPUMotherboardGraphicsGraphics
Intel Core i7-5960X Haswell-E 8-Core 3.0GHz LGA... MSI X99A GODlike Gaming Extreme Gaming Intel X99 MSI GTX 1070 Gaming-X 8GB SLI MSI GTX 1070 Gaming-X 8GB SLI 
RAMHard DriveHard DriveHard Drive
Corsair Vengeance led 64GB 8*8GB 2666Mhz Samsung 950 Pro 256GB ( Boot )  Samsung 850 Evo 1TB  Samsung 850 Evo 1TB  
CoolingOSMonitorKeyboard
Corsair H110i + SP140 Push/Pull Windows 10 Pro 64Bit Asus PG278Q 2560*1440p 144hz Gsync Razer BlackWidow Chroma Clicky Mechanical Gamin... 
PowerCaseMouseMouse Pad
Evga SuperNova 1300G + Red Sleeved Cabel's Corsair 780T Black + Nzxt HUe +  Razer Mamba Tournament Edition - Professional G... Corsair Extended pad 
Audio
Creative Sound Blaster-Z 
CPUMotherboardGraphicsRAM
Intel Core I7 6700k Skylake @4.7Ghz 1.320v  Gigabyte Z170X-Gaming 7 Evga GTX 1070 8GB Superclocked ACX 3.0  Corsair 16GB 3200Mhz 
Hard DriveHard DriveHard DriveHard Drive
Samsung 950 Pro 256GB in Raid 0 Samsung 950 Pro 256GB in Raid 0 Samsung 850 Evo 1TB  Samsung 850 Evo 1TB  
CoolingOSMonitorKeyboard
Corsair H110i + SP140 white fan's Microsoft Windows 10 Pro 64bit Asus PG278Q 2560X1440p 144hz Gsync Razer BlackWidow Chroma RGB Mechanical Gaming 
PowerCaseMouseMouse Pad
Evga SuperNova 1300 G2 Nzxt H440 Plus white  Razer Mamba Tournament Edition XXXL Pad 
  hide details  
Reply
   
The White Dark
(16 items)
 
CPUMotherboardGraphicsRAM
Intel Core I7 7700k Quad Core OC 5.1Ghz 1.344v Asus Z270 IX Code Nvidia GTX Titan-X Pascal 12GB Corsair Vengeance RGB 16GB 3000/C15 
Hard DriveHard DriveCoolingOS
Samsung Nvme 960 Evo 500GB Pny CS1311 480GB ThermalTake Water 3.0 Extreme 360m + Triple Rin... Windows 10 Pro 64Bit 
MonitorKeyboardPowerCase
Asus VG24QE 1080p 144Hz Razer Blackwidow Chroma  Evga SuperNova 850 B2 Corsair 780T White + Asus Front Base  
Mouse
Steelseries Rival 100  
CPUMotherboardGraphicsGraphics
Intel Core i7-5960X Haswell-E 8-Core 3.0GHz LGA... MSI X99A GODlike Gaming Extreme Gaming Intel X99 MSI GTX 1070 Gaming-X 8GB SLI MSI GTX 1070 Gaming-X 8GB SLI 
RAMHard DriveHard DriveHard Drive
Corsair Vengeance led 64GB 8*8GB 2666Mhz Samsung 950 Pro 256GB ( Boot )  Samsung 850 Evo 1TB  Samsung 850 Evo 1TB  
CoolingOSMonitorKeyboard
Corsair H110i + SP140 Push/Pull Windows 10 Pro 64Bit Asus PG278Q 2560*1440p 144hz Gsync Razer BlackWidow Chroma Clicky Mechanical Gamin... 
PowerCaseMouseMouse Pad
Evga SuperNova 1300G + Red Sleeved Cabel's Corsair 780T Black + Nzxt HUe +  Razer Mamba Tournament Edition - Professional G... Corsair Extended pad 
Audio
Creative Sound Blaster-Z 
CPUMotherboardGraphicsRAM
Intel Core I7 6700k Skylake @4.7Ghz 1.320v  Gigabyte Z170X-Gaming 7 Evga GTX 1070 8GB Superclocked ACX 3.0  Corsair 16GB 3200Mhz 
Hard DriveHard DriveHard DriveHard Drive
Samsung 950 Pro 256GB in Raid 0 Samsung 950 Pro 256GB in Raid 0 Samsung 850 Evo 1TB  Samsung 850 Evo 1TB  
CoolingOSMonitorKeyboard
Corsair H110i + SP140 white fan's Microsoft Windows 10 Pro 64bit Asus PG278Q 2560X1440p 144hz Gsync Razer BlackWidow Chroma RGB Mechanical Gaming 
PowerCaseMouseMouse Pad
Evga SuperNova 1300 G2 Nzxt H440 Plus white  Razer Mamba Tournament Edition XXXL Pad 
  hide details  
Reply
post #7020 of 8561
Quote:
Originally Posted by Mr-Dark View Post


what about the voltage ? did yo try an 1.275v bios ? how your temp ? ASIC ?

Running custom loop( temps under 50celsius), and ye 1.275v bios. Asic only 61%. Here is one of the bios you made.
custom1.zip 152k .zip file
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: NVIDIA
Overclock.net › Forums › Graphics Cards › NVIDIA › Nvidia GTX 900 cards custom bios (upon request )