Overclock.net › Forums › Cooling › Water Cooling › [Build Log] The Martian - 900D Mod, Dual loop, Custom paint (Version 2)
New Posts  All Forums:Forum Nav:

[Build Log] The Martian - 900D Mod, Dual loop, Custom paint (Version 2)

post #1 of 4
Thread Starter 
This is my second attempt at this build for the Corsair 900D build. I finished the first build last week and not quite happy with it so here I'm at the second attempt for this case. My goals is to share informations,mistakes and to take input to make my build better.

[Main Components]:
  • ASUS Rampage IV Extreme
  • Intel Core i7-4930k
  • Corsair Dominator 24GB (6 x 4GB) DDR3
  • 2x MSI GTX 780TI
  • SilverStone ST1000-G Evolution (1000w)
  • Corsair 900D Case
  • 2x 256 GB SSD ADATA Premier Pro, SATA 3 (6.0 GB/s) Read/Write 550 MB/s
  • Samsung 512 850 Pro SSD
  • 5 TB WD External HHD
  • NZXT SEN-001 LX dual bay fan controller.

[Cooling Components]
Water Blocks and main components:
  • EK ASUS Rampage IV Extreme full board cooling block (EK-FB KIT RE4)
  • EK Monarch Series X4 Ram liquid cooling block
  • EK Monarch Series X6 Ram liquid cooling block
  • Bitspower Water Tank Z-Multi 150 inline Reservoir
  • EK-Supremacy CPU Water Block
  • Bitspower G 1/4 Thread Dual D5 Mod Top - POM Version (BP-2D5TOPP-BK)
  • 2x MCP655-PWM Pump
  • XSPC RX360 V3 Triple 120mm Radiator (G1/4)
  • EK-CoolStream XE 480 (Quad) Radiator (G1/4)
  • Mayhem pastel Red coolant
  • 2x Bitspower 250 reservoir.

Fittings and acrylic tubing:
  • Bitspower G1/4 Deluxe White Enhance Multi-link for OD 16MM (BP-DWEML16)
  • Bitspower G1/4 Deluxe White Multi-Link For OD 16MM (BP-DWWP-C89)
  • Bitspower G1/4 Male to Female Extender 30mm- White
  • Bitspower G1/4 Male to Female Extender 10mm- White
  • Bitspower G1/4 Thread 90-Degree Rotary Adapter - White (BP-DW90R)
  • Bitspower BP-MVV-DWBK Mini-Valve - Deluxe White With Black Handle (BP-MVV-DWBK)
  • Bitspower SLI / Crossfire Multi-Link Adapter Pair - White (BP-BSWP-C47)
  • Bitspower 3-way split connector
  • Bitspower stop fittings
  • Bitspower SLI / Crossfire Crystal Link Tube Set
  • Bitspower Non-champher Crystal Link 16mm OD - Acrylic tubing (BP-NCCLT16AC)
* And some other Bitspower fitting
[Fans, Lights, Cable Sleevings and Misc/Toys]
  • DarkSide CONNECT Dimmable Modular LED Strip - White and Red
  • ModMyToys HELIOS - Premium LED Spotlight - White
  • ModMyToys 4-Pin Power Distribution PCB - 5-Way Block
  • ModMyToys 4-Pin Power Distribution PCB - 8-Way Block
  • ModMyToys 4-Pin Power Distribution PCB - 8 x PWM/3-Pin & 2x Molex Output, 1x SATA & 1xMolex Inputs
  • Corsair SP120 High Performance fan. (And other Corsair fans)
  • EVGA Pro SLI Bridge V2, 2-Way Long (100-2W-0023-LR)
  • NZXT SEN-001 LX dual bay fan controller.
  • LC Teleios Sleeve (White and Red)
  • LC custom cables and sleeving tool (http://mainframecustom.com/)
  • E22 cable combs
  • 6mm thick White Arylic and Black/White Carbon Fiber Vinyl
  • Arctic Silver 5 Thermal Compound

[Peripherals]
  • Razer Blackwidow Ultimate 2013 Full Mechanical Gaming keyboard
  • Razer Naga Epic gaming mouse.
  • Astro A50 wireless headset.
  • Steelseries QCK mousepad.
  • 2x ASUS 144hz 1ms 24” monitor VG248QE black.

My first build (finished last week)






Because this is a second attempt of the first build, some of the works and components are done. For this second build, I will have to use more fittings instead of bending tubing and changing some components.
Edited by TPham - 10/23/15 at 11:28am
post #2 of 4
Thread Starter 
Old photos, but here is the process of making custom cables and sleeving.





At first I was thinking to get the Black Ice Nemesis GTX but after seen the reviews I decided to buy the EK coolstream xe - 480 radiator.
Reviews: http://www.xtremerigs.net/2015/05/31/ek-coolstream-xe-360mm-radiator-review/5/



At first I was thinking to get the Black Ice Nemesis GTX but after seen the reviews I decided to buy the EK coolstream xe - 480 radiator.
Reviews: http://www.xtremerigs.net/2015/05/31/ek-coolstream-xe-360mm-radiator-review/5/
Edited by TPham - 10/23/15 at 11:25am
post #3 of 4
Thread Starter 




post #4 of 4
Thread Starter 
This is my current idea of this build. Sorry these pictures was taken late at night so it kind of dark







Edited by TPham - 10/23/15 at 11:29am
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › [Build Log] The Martian - 900D Mod, Dual loop, Custom paint (Version 2)