Overclock.net › Forums › Components › Mice › Mouse causing fps drops
New Posts  All Forums:Forum Nav:

Mouse causing fps drops

post #1 of 7
Thread Starter 
My Logitech G502 recently caused fps drops in my games such as CS:GO and Bioshock
It apparently works fine if I put my polling rate 125hz and 250hz but if I put it on 1000hz or 500hz I get like 20 fps in CS:GO (even in themenu!!!)
Another thing to note is if I keep my mouse still my fps is normal (around 300 fps) but when I move it **** goes down.
I checked my computer, drivers, firmware, LGS and everything but found nothing which can solve it.
Does anybody have a solution ? Because I found nothing in the interwebz either and I dont really want to play with 125hz either biggrin.gif
post #2 of 7
Your CPU could be quite weak...specs?
post #3 of 7
Thread Starter 
not really I have an AMD FX 6300 and a AMD Radeon R9 200 Series
it worked perfectly fine before but now its unbearable
i had the g502 for nearly a year now
post #4 of 7
Was your last mouse 1000hz?
post #5 of 7
Check to make sure you're not running it in a USB 3.0 port. There are some USB 2.0/3.0 bridge issues that can cause what you describe, whereas running the mouse in USB 2.0 native mode might give better results. If you're already in a USB 2.0 jack, I can't help ya.

For what it's worth, I can't tell the difference between 125 Hz and 250 Hz polling rate, I know I couldn't tell with 500+ Hz. But, I also don't yank my mouse around like a rabid ape either. =)

Greg
post #6 of 7
Thread Starter 
it was some weird sharkoon gaming mouse that i got for free so probably not
i used the g502 on 1000hz without any problems for a year as i said before but dunno why its acting up now
post #7 of 7
Thread Starter 
Quote:
Originally Posted by hammong View Post

Check to make sure you're not running it in a USB 3.0 port. There are some USB 2.0/3.0 bridge issues that can cause what you describe, whereas running the mouse in USB 2.0 native mode might give better results. If you're already in a USB 2.0 jack, I can't help ya.

For what it's worth, I can't tell the difference between 125 Hz and 250 Hz polling rate, I know I couldn't tell with 500+ Hz. But, I also don't yank my mouse around like a rabid ape either. =)

Greg

had it plugged in a usb 2.0 already, just now i tried to plug it in a usb 3.0 but it made no difference
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Mice
Overclock.net › Forums › Components › Mice › Mouse causing fps drops