Overclock.net › Forums › Intel › Intel Motherboards › Intel BIOS › Guide: How to update the CPU Microcode on the X99 AMI bios
New Posts  All Forums:Forum Nav:

Guide: How to update the CPU Microcode on the X99 AMI bios - Page 2

post #11 of 13
I am trying to update an ASUS X99-E WS microcode to support BRW-E, but also an ES CPU that is HSW-E. The same ES HSW-E CPU boots without any problems on an ASUS X99 Deluxe & X99-A USB3.1.

I have extracted, edited, and replaced the 1BA0062E-C779-4582-8566-336AE8F78F09 per LordKag's instructions, but where the heck is the E7883IMS.110 file?

I assume these are still necessary with UBU? I tried just running UBU, but it does not seem like it is patching the microcode and I have been hesitant to flash it until I know I have completed the steps.
post #12 of 13
Messing around trying to get bw-ep to work on my X99 sabertooth board.

Asus hasn't added support for any of the Xeon V4s to their X99 boards, but they do support bw-e i7s.
Is it possible to nab the microcode from their X99 workstation (supports Xeon v4) and just swap it into the sabertooth bios?



I'm a bit confused as to why there are two sets of each microcode update, the earlier bios revisions don't have that.
post #13 of 13
Hello i understand the proces.... but.... how to delete the microcode?
I want to delete my microcode with UEFITool but i don't know how.
Can i just delete the whole body of that microcode?
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel BIOS
Overclock.net › Forums › Intel › Intel Motherboards › Intel BIOS › Guide: How to update the CPU Microcode on the X99 AMI bios