Overclock.net › Forums › AMD › AMD CPUs › 8350 OC question
New Posts  All Forums:Forum Nav:

8350 OC question

post #1 of 6
Thread Starter 
Hi! new to over clocking but jumped into it. Got an AMD 8350 and usually it turbos at 4.2 as u may know i decided to step it up to 4.4 and after doing all the required disabling and stock settings and so on been stressin it on prime and got this data in from voltage, frequency: http://puu.sh/kQUOQ/392b7c64fb.png
Can anyone tell me whether or not having the voltage jump around like that is really bad? i only turned up the voltage very slightly, from 1.325 to 1.375 on the vcore, runin on a medium llc and 22x.

Are those voltages indicating that with prime putting out a load on my system, that im running rather jolty? here is after 45 minutes: http://puu.sh/kQVjV/3b5cc9c538.png

Both these screenshot graphs are done under load


This is my rig:
http://www.overclock.net/lists/display/view/id/6352591
Edited by AidsAids - 10/20/15 at 9:18am
post #2 of 6
Thread Starter 
accidental double post soz
Edited by AidsAids - 10/20/15 at 3:37am
post #3 of 6
What motherboard are you using? You should fill out the RigBuilder, check the link to it at the upper right of your page.
Lil' Roy Taylor
(11 items)
 
  
Reply
Lil' Roy Taylor
(11 items)
 
  
Reply
post #4 of 6
Thread Starter 
Link to rig now in description thanks, I'm mostly just trying to get it the most stable I can and right now it seems stable but I can't tell due to my inexperience. My vcore is 1.375 llc is medium which I believe translates to high since there is no high setting only extreme after medium and I'm at 4.4 ghz and I think after 5 hours of testing it was kinda jolts but I'm not sure it seemed stable since the processor used to turbo at 4.2 anyways
post #5 of 6
You do have APM and turbo disabled, right? Also try enabling HPC.
Main
(16 items)
 
Dedicated Encoder
(15 items)
 
 
CPUMotherboardGraphicsRAM
FX-8320@4Ghz Gigabyte 970 UD3P rev2.1 Gainward GTX 750Ti Corsair XMS3 1600Mhz 16GB (4x4GB) 
Hard DriveHard DriveOptical DriveOptical Drive
Crucial BX100 250GB Western Digital Green 2TB LiteOn Blu-Ray Burner IHBS 112-2 LG BH16NS55 Blu-Ray Burner 
CoolingOSMonitorKeyboard
Scythe Katana 3 Windows 7 Pro 64bit ASUS 22" VS228HR Microsoft Wired Keyboard 600 
PowerCaseMouseAudio
EVGA 430W Sharkoon VG4-V Logitech M90 Onboard 
CPUMotherboardGraphicsRAM
FX-8300 Asrock 970 Extreme3 HIS 6570 Silence Corsair XMS3 1600Mhz 8GB (2x4GB) CAS9 
Hard DriveHard DriveOptical DriveCooling
Plextor M6S 128GB Toshiba 2TB SATAIII LiteOn Blu Ray burner IHBS 112-2 Xigmatek Balder 
OSMonitorKeyboardPower
Windows 7 Pro 64bit Samsung S22B350H Microsoft Wired 600 Corsair VS350 
CaseMouseAudio
Lepa LPC 306 Logitech M90 Onboard 
  hide details  
Reply
Main
(16 items)
 
Dedicated Encoder
(15 items)
 
 
CPUMotherboardGraphicsRAM
FX-8320@4Ghz Gigabyte 970 UD3P rev2.1 Gainward GTX 750Ti Corsair XMS3 1600Mhz 16GB (4x4GB) 
Hard DriveHard DriveOptical DriveOptical Drive
Crucial BX100 250GB Western Digital Green 2TB LiteOn Blu-Ray Burner IHBS 112-2 LG BH16NS55 Blu-Ray Burner 
CoolingOSMonitorKeyboard
Scythe Katana 3 Windows 7 Pro 64bit ASUS 22" VS228HR Microsoft Wired Keyboard 600 
PowerCaseMouseAudio
EVGA 430W Sharkoon VG4-V Logitech M90 Onboard 
CPUMotherboardGraphicsRAM
FX-8300 Asrock 970 Extreme3 HIS 6570 Silence Corsair XMS3 1600Mhz 8GB (2x4GB) CAS9 
Hard DriveHard DriveOptical DriveCooling
Plextor M6S 128GB Toshiba 2TB SATAIII LiteOn Blu Ray burner IHBS 112-2 Xigmatek Balder 
OSMonitorKeyboardPower
Windows 7 Pro 64bit Samsung S22B350H Microsoft Wired 600 Corsair VS350 
CaseMouseAudio
Lepa LPC 306 Logitech M90 Onboard 
  hide details  
Reply
post #6 of 6
Thread Starter 
Yea, i have followed a guide on what to and what not to disable,i have turbo disabled and all power saving features except apm in BIOS. Im jus curious that i would hurt my cpu too much with my rig if its a bit jolty.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD CPUs
Overclock.net › Forums › AMD › AMD CPUs › 8350 OC question