Overclock.net › Forums › Cooling › Water Cooling › 3D Printed Waterfall Reservoir Concept
New Posts  All Forums:Forum Nav:

3D Printed Waterfall Reservoir Concept - Page 2

post #11 of 37
Thread Starter 
For sure right off the printer it will probably be a leaky mess. I'll have to acetone smooth or cover with sealant or some other form of post processing.
And of course it's not going right into my PC.. Gonna bench test it first.
Quote:
Originally Posted by Jakusonfire View Post

I wouldn't risk it. A g1/4 tap is not expensive. I got one for 6 bucks and because it only has to cut plastic it'll be fine and doesn't need to be HSS or anything. Just print the right size of smooth holes.

If you are printing it I would totally rather use an oring seal on the front. Just design in an oring groove and you can bolt the front on. Then you end up with a res you can dismantle for proper cleaning. Glued or otherwise sealed res suck major nuts.

ah yeah this makes much more sense lol.
Whered you get your tap? I'm looking on amazon
    
CPUMotherboardGraphicsRAM
Core i7 5930k MSI X99S SLI GTX 1080 32GB Crucial DDR4 
Hard DriveHard DriveCoolingCooling
(3x) Crucial 256GB (768gb RAID0) WD 3TB EK Supremacy EVO + D5 Vario GT-AP15 
CoolingMonitorMonitorKeyboard
2X HWLABS GTX360 (2x) 1440p QHD PLS MicroBoard 40" 4k MVA Corsair K70 RGB 
PowerCaseMouseAudio
Corsair RM1000 Custom Build Logitech G900 Yamaha RX-V465 + 5.1 Surround 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Core i7 5930k MSI X99S SLI GTX 1080 32GB Crucial DDR4 
Hard DriveHard DriveCoolingCooling
(3x) Crucial 256GB (768gb RAID0) WD 3TB EK Supremacy EVO + D5 Vario GT-AP15 
CoolingMonitorMonitorKeyboard
2X HWLABS GTX360 (2x) 1440p QHD PLS MicroBoard 40" 4k MVA Corsair K70 RGB 
PowerCaseMouseAudio
Corsair RM1000 Custom Build Logitech G900 Yamaha RX-V465 + 5.1 Surround 
  hide details  
Reply
post #12 of 37
Bro... this is along the same lines of what I did with eNVy....

If you need help with how we did it then give me a shout but be prepared for it to be a huge PITA
eNVy
(13 items)
 
"47"
(8 items)
 
 
CPUMotherboardGraphicsGraphics
Intel i7-5960x EVGA X99 Micro EVGA GTX Titan X EVGA GTX Titan X 
RAMHard DriveCoolingCooling
Corsair LPX 2400mhz DDR4 Samsung Evo 1TB BItspower CPU block 2 Aquacomputer GTX Titan X Nickel and Glass 
CoolingCoolingOSPower
3 Dazmode ultra slim 240mm Parvum F1 Black Fans Windows 10 Corsair AX1200i 
Case
Custom Parvum 
CPUMotherboardGraphicsCooling
Intel i5-6500 EVGA Z170 Stinger Visiontek R9 Fury X Fully watercooled by EK Waterblocks 
OSMonitorPowerCase
Windows 10 Nixeus VUE24A EVGA 650 GS NZXZT Manta - Matte White 
  hide details  
Reply
eNVy
(13 items)
 
"47"
(8 items)
 
 
CPUMotherboardGraphicsGraphics
Intel i7-5960x EVGA X99 Micro EVGA GTX Titan X EVGA GTX Titan X 
RAMHard DriveCoolingCooling
Corsair LPX 2400mhz DDR4 Samsung Evo 1TB BItspower CPU block 2 Aquacomputer GTX Titan X Nickel and Glass 
CoolingCoolingOSPower
3 Dazmode ultra slim 240mm Parvum F1 Black Fans Windows 10 Corsair AX1200i 
Case
Custom Parvum 
CPUMotherboardGraphicsCooling
Intel i5-6500 EVGA Z170 Stinger Visiontek R9 Fury X Fully watercooled by EK Waterblocks 
OSMonitorPowerCase
Windows 10 Nixeus VUE24A EVGA 650 GS NZXZT Manta - Matte White 
  hide details  
Reply
post #13 of 37
Thread Starter 
Quote:
Originally Posted by MunneY View Post

Bro... this is along the same lines of what I did with eNVy....

If you need help with how we did it then give me a shout but be prepared for it to be a huge PITA


do you have some pics of it? I saw this but i don't see the res

iTjyV9e.jpg
    
CPUMotherboardGraphicsRAM
Core i7 5930k MSI X99S SLI GTX 1080 32GB Crucial DDR4 
Hard DriveHard DriveCoolingCooling
(3x) Crucial 256GB (768gb RAID0) WD 3TB EK Supremacy EVO + D5 Vario GT-AP15 
CoolingMonitorMonitorKeyboard
2X HWLABS GTX360 (2x) 1440p QHD PLS MicroBoard 40" 4k MVA Corsair K70 RGB 
PowerCaseMouseAudio
Corsair RM1000 Custom Build Logitech G900 Yamaha RX-V465 + 5.1 Surround 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Core i7 5930k MSI X99S SLI GTX 1080 32GB Crucial DDR4 
Hard DriveHard DriveCoolingCooling
(3x) Crucial 256GB (768gb RAID0) WD 3TB EK Supremacy EVO + D5 Vario GT-AP15 
CoolingMonitorMonitorKeyboard
2X HWLABS GTX360 (2x) 1440p QHD PLS MicroBoard 40" 4k MVA Corsair K70 RGB 
PowerCaseMouseAudio
Corsair RM1000 Custom Build Logitech G900 Yamaha RX-V465 + 5.1 Surround 
  hide details  
Reply
post #14 of 37









eNVy
(13 items)
 
"47"
(8 items)
 
 
CPUMotherboardGraphicsGraphics
Intel i7-5960x EVGA X99 Micro EVGA GTX Titan X EVGA GTX Titan X 
RAMHard DriveCoolingCooling
Corsair LPX 2400mhz DDR4 Samsung Evo 1TB BItspower CPU block 2 Aquacomputer GTX Titan X Nickel and Glass 
CoolingCoolingOSPower
3 Dazmode ultra slim 240mm Parvum F1 Black Fans Windows 10 Corsair AX1200i 
Case
Custom Parvum 
CPUMotherboardGraphicsCooling
Intel i5-6500 EVGA Z170 Stinger Visiontek R9 Fury X Fully watercooled by EK Waterblocks 
OSMonitorPowerCase
Windows 10 Nixeus VUE24A EVGA 650 GS NZXZT Manta - Matte White 
  hide details  
Reply
eNVy
(13 items)
 
"47"
(8 items)
 
 
CPUMotherboardGraphicsGraphics
Intel i7-5960x EVGA X99 Micro EVGA GTX Titan X EVGA GTX Titan X 
RAMHard DriveCoolingCooling
Corsair LPX 2400mhz DDR4 Samsung Evo 1TB BItspower CPU block 2 Aquacomputer GTX Titan X Nickel and Glass 
CoolingCoolingOSPower
3 Dazmode ultra slim 240mm Parvum F1 Black Fans Windows 10 Corsair AX1200i 
Case
Custom Parvum 
CPUMotherboardGraphicsCooling
Intel i5-6500 EVGA Z170 Stinger Visiontek R9 Fury X Fully watercooled by EK Waterblocks 
OSMonitorPowerCase
Windows 10 Nixeus VUE24A EVGA 650 GS NZXZT Manta - Matte White 
  hide details  
Reply
post #15 of 37
Thread Starter 
Holy crap I didn't realize that whole panel was a reservoir. Amazing thumb.gif
    
CPUMotherboardGraphicsRAM
Core i7 5930k MSI X99S SLI GTX 1080 32GB Crucial DDR4 
Hard DriveHard DriveCoolingCooling
(3x) Crucial 256GB (768gb RAID0) WD 3TB EK Supremacy EVO + D5 Vario GT-AP15 
CoolingMonitorMonitorKeyboard
2X HWLABS GTX360 (2x) 1440p QHD PLS MicroBoard 40" 4k MVA Corsair K70 RGB 
PowerCaseMouseAudio
Corsair RM1000 Custom Build Logitech G900 Yamaha RX-V465 + 5.1 Surround 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Core i7 5930k MSI X99S SLI GTX 1080 32GB Crucial DDR4 
Hard DriveHard DriveCoolingCooling
(3x) Crucial 256GB (768gb RAID0) WD 3TB EK Supremacy EVO + D5 Vario GT-AP15 
CoolingMonitorMonitorKeyboard
2X HWLABS GTX360 (2x) 1440p QHD PLS MicroBoard 40" 4k MVA Corsair K70 RGB 
PowerCaseMouseAudio
Corsair RM1000 Custom Build Logitech G900 Yamaha RX-V465 + 5.1 Surround 
  hide details  
Reply
post #16 of 37
Quote:
Originally Posted by iCrap View Post

Holy crap I didn't realize that whole panel was a reservoir. Amazing thumb.gif

Yeah... its a little deceiving in the case.

here is a better shot filled.

eNVy
(13 items)
 
"47"
(8 items)
 
 
CPUMotherboardGraphicsGraphics
Intel i7-5960x EVGA X99 Micro EVGA GTX Titan X EVGA GTX Titan X 
RAMHard DriveCoolingCooling
Corsair LPX 2400mhz DDR4 Samsung Evo 1TB BItspower CPU block 2 Aquacomputer GTX Titan X Nickel and Glass 
CoolingCoolingOSPower
3 Dazmode ultra slim 240mm Parvum F1 Black Fans Windows 10 Corsair AX1200i 
Case
Custom Parvum 
CPUMotherboardGraphicsCooling
Intel i5-6500 EVGA Z170 Stinger Visiontek R9 Fury X Fully watercooled by EK Waterblocks 
OSMonitorPowerCase
Windows 10 Nixeus VUE24A EVGA 650 GS NZXZT Manta - Matte White 
  hide details  
Reply
eNVy
(13 items)
 
"47"
(8 items)
 
 
CPUMotherboardGraphicsGraphics
Intel i7-5960x EVGA X99 Micro EVGA GTX Titan X EVGA GTX Titan X 
RAMHard DriveCoolingCooling
Corsair LPX 2400mhz DDR4 Samsung Evo 1TB BItspower CPU block 2 Aquacomputer GTX Titan X Nickel and Glass 
CoolingCoolingOSPower
3 Dazmode ultra slim 240mm Parvum F1 Black Fans Windows 10 Corsair AX1200i 
Case
Custom Parvum 
CPUMotherboardGraphicsCooling
Intel i5-6500 EVGA Z170 Stinger Visiontek R9 Fury X Fully watercooled by EK Waterblocks 
OSMonitorPowerCase
Windows 10 Nixeus VUE24A EVGA 650 GS NZXZT Manta - Matte White 
  hide details  
Reply
post #17 of 37
Quote:
Originally Posted by iCrap View Post

Quote:
Originally Posted by josepi View Post

Well this will most definetly work haha tongue.gif

IMHO I think in solidworks there is a easy way to add the G 1/4 Threads, but sadly i dont know how to use that software frown.gif. Being said, I do think that could be 3D printed without any issues. rolleyes.gif

Ah yeah your right. I found it now.
Hopefully the threads can print correctly.

If your using the threads from the toolbox those arent "real" threads, they are just a JPG that overlays an image to visual the thread, and they wont save with the STL file to 3D print. you usually have to use a helix an extrude cut feature to create an actual thread on the face so it is part of the model and will get saved to the STL file.
 
Spare Parts
(8 items)
 
 
CPUMotherboardGraphicsRAM
intel i5 750 Lynnfield Gigabyte GA-P55-USB3 ASUS Strix GTX 960 G.SKILL Ripjaws X Series 16GB (2 x 8GB) 240-Pin... 
Hard DriveCoolingCoolingCooling
Crucial BX100 SSD 500GB EKWB EK-KIT L120 Corsair SP120 Koolance 2x140mm Radiator HX-CU1402V 
CoolingCoolingOSMonitor
Corsair AF140 Bitspower VG-NGTX960 Windows 7 Ultimate 64 bit Samsung Curved 27" S27D590C 
KeyboardPowerCaseMouse
Corsair Strafe RGB Apevia Iceburg 680 watts Apevia X-Sniper 2 EVGA Torq X3 Laser 
CPUMotherboardGraphicsRAM
AMD Phenom 9750 ASUS M3A78-CM PNY XLR8 GTX 460 Corsair XMS2 (4 x 1GB) 
Hard DriveCoolingCoolingPower
Hitachi 5K500 Silenx 92mm EFFIZIO Corsair SP 120 Red LED Antec 500watt 
CPUMotherboardGraphicsRAM
Intel Core i5-6400 Skylake ASRock A170A-X1/3.1 Gigabye G1 Gaming GTX 970 Windforce CORSAIR Vengeance LPX 16GB (4 x 4GB) 288-Pin DD... 
CoolingCoolingCoolingCooling
Bykski CPU-XPR-A High Performance Acrylic Nicke... EKWB Acrylic Nickel GPU Block Monsoon MMRS Reservoir Bykski BY-PUMP-XPH-PA Water Cooling Pump 
CoolingCoolingCoolingCooling
Koolance 240 30 FPI Radiator Magicool 280 14 FPI Radiator Bitfenix Spectre PWM 120mm Fan ML140 140mm PWM Premium Magnetic Levitation Fan 
OSPowerCase
Windows 10 Pro Corsair RM Series 850 Thermaltake Suppressor F31 
  hide details  
Reply
 
Spare Parts
(8 items)
 
 
CPUMotherboardGraphicsRAM
intel i5 750 Lynnfield Gigabyte GA-P55-USB3 ASUS Strix GTX 960 G.SKILL Ripjaws X Series 16GB (2 x 8GB) 240-Pin... 
Hard DriveCoolingCoolingCooling
Crucial BX100 SSD 500GB EKWB EK-KIT L120 Corsair SP120 Koolance 2x140mm Radiator HX-CU1402V 
CoolingCoolingOSMonitor
Corsair AF140 Bitspower VG-NGTX960 Windows 7 Ultimate 64 bit Samsung Curved 27" S27D590C 
KeyboardPowerCaseMouse
Corsair Strafe RGB Apevia Iceburg 680 watts Apevia X-Sniper 2 EVGA Torq X3 Laser 
CPUMotherboardGraphicsRAM
AMD Phenom 9750 ASUS M3A78-CM PNY XLR8 GTX 460 Corsair XMS2 (4 x 1GB) 
Hard DriveCoolingCoolingPower
Hitachi 5K500 Silenx 92mm EFFIZIO Corsair SP 120 Red LED Antec 500watt 
CPUMotherboardGraphicsRAM
Intel Core i5-6400 Skylake ASRock A170A-X1/3.1 Gigabye G1 Gaming GTX 970 Windforce CORSAIR Vengeance LPX 16GB (4 x 4GB) 288-Pin DD... 
CoolingCoolingCoolingCooling
Bykski CPU-XPR-A High Performance Acrylic Nicke... EKWB Acrylic Nickel GPU Block Monsoon MMRS Reservoir Bykski BY-PUMP-XPH-PA Water Cooling Pump 
CoolingCoolingCoolingCooling
Koolance 240 30 FPI Radiator Magicool 280 14 FPI Radiator Bitfenix Spectre PWM 120mm Fan ML140 140mm PWM Premium Magnetic Levitation Fan 
OSPowerCase
Windows 10 Pro Corsair RM Series 850 Thermaltake Suppressor F31 
  hide details  
Reply
post #18 of 37
Thread Starter 
Quote:
Originally Posted by Radnad View Post

If your using the threads from the toolbox those arent "real" threads, they are just a JPG that overlays an image to visual the thread, and they wont save with the STL file to 3D print. you usually have to use a helix an extrude cut feature to create an actual thread on the face so it is part of the model and will get saved to the STL file.

Nah, i'm using the hole wizard. Those should save into the STL right?
    
CPUMotherboardGraphicsRAM
Core i7 5930k MSI X99S SLI GTX 1080 32GB Crucial DDR4 
Hard DriveHard DriveCoolingCooling
(3x) Crucial 256GB (768gb RAID0) WD 3TB EK Supremacy EVO + D5 Vario GT-AP15 
CoolingMonitorMonitorKeyboard
2X HWLABS GTX360 (2x) 1440p QHD PLS MicroBoard 40" 4k MVA Corsair K70 RGB 
PowerCaseMouseAudio
Corsair RM1000 Custom Build Logitech G900 Yamaha RX-V465 + 5.1 Surround 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Core i7 5930k MSI X99S SLI GTX 1080 32GB Crucial DDR4 
Hard DriveHard DriveCoolingCooling
(3x) Crucial 256GB (768gb RAID0) WD 3TB EK Supremacy EVO + D5 Vario GT-AP15 
CoolingMonitorMonitorKeyboard
2X HWLABS GTX360 (2x) 1440p QHD PLS MicroBoard 40" 4k MVA Corsair K70 RGB 
PowerCaseMouseAudio
Corsair RM1000 Custom Build Logitech G900 Yamaha RX-V465 + 5.1 Surround 
  hide details  
Reply
post #19 of 37
Quote:
Originally Posted by iCrap View Post

Quote:
Originally Posted by Radnad View Post

If your using the threads from the toolbox those arent "real" threads, they are just a JPG that overlays an image to visual the thread, and they wont save with the STL file to 3D print. you usually have to use a helix an extrude cut feature to create an actual thread on the face so it is part of the model and will get saved to the STL file.

Nah, i'm using the hole wizard. Those should save into the STL right?

i dont think so. its been a few years since i used solidworks, but never worked in the past versions.
 
Spare Parts
(8 items)
 
 
CPUMotherboardGraphicsRAM
intel i5 750 Lynnfield Gigabyte GA-P55-USB3 ASUS Strix GTX 960 G.SKILL Ripjaws X Series 16GB (2 x 8GB) 240-Pin... 
Hard DriveCoolingCoolingCooling
Crucial BX100 SSD 500GB EKWB EK-KIT L120 Corsair SP120 Koolance 2x140mm Radiator HX-CU1402V 
CoolingCoolingOSMonitor
Corsair AF140 Bitspower VG-NGTX960 Windows 7 Ultimate 64 bit Samsung Curved 27" S27D590C 
KeyboardPowerCaseMouse
Corsair Strafe RGB Apevia Iceburg 680 watts Apevia X-Sniper 2 EVGA Torq X3 Laser 
CPUMotherboardGraphicsRAM
AMD Phenom 9750 ASUS M3A78-CM PNY XLR8 GTX 460 Corsair XMS2 (4 x 1GB) 
Hard DriveCoolingCoolingPower
Hitachi 5K500 Silenx 92mm EFFIZIO Corsair SP 120 Red LED Antec 500watt 
CPUMotherboardGraphicsRAM
Intel Core i5-6400 Skylake ASRock A170A-X1/3.1 Gigabye G1 Gaming GTX 970 Windforce CORSAIR Vengeance LPX 16GB (4 x 4GB) 288-Pin DD... 
CoolingCoolingCoolingCooling
Bykski CPU-XPR-A High Performance Acrylic Nicke... EKWB Acrylic Nickel GPU Block Monsoon MMRS Reservoir Bykski BY-PUMP-XPH-PA Water Cooling Pump 
CoolingCoolingCoolingCooling
Koolance 240 30 FPI Radiator Magicool 280 14 FPI Radiator Bitfenix Spectre PWM 120mm Fan ML140 140mm PWM Premium Magnetic Levitation Fan 
OSPowerCase
Windows 10 Pro Corsair RM Series 850 Thermaltake Suppressor F31 
  hide details  
Reply
 
Spare Parts
(8 items)
 
 
CPUMotherboardGraphicsRAM
intel i5 750 Lynnfield Gigabyte GA-P55-USB3 ASUS Strix GTX 960 G.SKILL Ripjaws X Series 16GB (2 x 8GB) 240-Pin... 
Hard DriveCoolingCoolingCooling
Crucial BX100 SSD 500GB EKWB EK-KIT L120 Corsair SP120 Koolance 2x140mm Radiator HX-CU1402V 
CoolingCoolingOSMonitor
Corsair AF140 Bitspower VG-NGTX960 Windows 7 Ultimate 64 bit Samsung Curved 27" S27D590C 
KeyboardPowerCaseMouse
Corsair Strafe RGB Apevia Iceburg 680 watts Apevia X-Sniper 2 EVGA Torq X3 Laser 
CPUMotherboardGraphicsRAM
AMD Phenom 9750 ASUS M3A78-CM PNY XLR8 GTX 460 Corsair XMS2 (4 x 1GB) 
Hard DriveCoolingCoolingPower
Hitachi 5K500 Silenx 92mm EFFIZIO Corsair SP 120 Red LED Antec 500watt 
CPUMotherboardGraphicsRAM
Intel Core i5-6400 Skylake ASRock A170A-X1/3.1 Gigabye G1 Gaming GTX 970 Windforce CORSAIR Vengeance LPX 16GB (4 x 4GB) 288-Pin DD... 
CoolingCoolingCoolingCooling
Bykski CPU-XPR-A High Performance Acrylic Nicke... EKWB Acrylic Nickel GPU Block Monsoon MMRS Reservoir Bykski BY-PUMP-XPH-PA Water Cooling Pump 
CoolingCoolingCoolingCooling
Koolance 240 30 FPI Radiator Magicool 280 14 FPI Radiator Bitfenix Spectre PWM 120mm Fan ML140 140mm PWM Premium Magnetic Levitation Fan 
OSPowerCase
Windows 10 Pro Corsair RM Series 850 Thermaltake Suppressor F31 
  hide details  
Reply
post #20 of 37
Thread Starter 
Quote:
Originally Posted by Radnad View Post

i dont think so. its been a few years since i used solidworks, but never worked in the past versions.

Oh weird. Ok i'll try what you said then.
    
CPUMotherboardGraphicsRAM
Core i7 5930k MSI X99S SLI GTX 1080 32GB Crucial DDR4 
Hard DriveHard DriveCoolingCooling
(3x) Crucial 256GB (768gb RAID0) WD 3TB EK Supremacy EVO + D5 Vario GT-AP15 
CoolingMonitorMonitorKeyboard
2X HWLABS GTX360 (2x) 1440p QHD PLS MicroBoard 40" 4k MVA Corsair K70 RGB 
PowerCaseMouseAudio
Corsair RM1000 Custom Build Logitech G900 Yamaha RX-V465 + 5.1 Surround 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Core i7 5930k MSI X99S SLI GTX 1080 32GB Crucial DDR4 
Hard DriveHard DriveCoolingCooling
(3x) Crucial 256GB (768gb RAID0) WD 3TB EK Supremacy EVO + D5 Vario GT-AP15 
CoolingMonitorMonitorKeyboard
2X HWLABS GTX360 (2x) 1440p QHD PLS MicroBoard 40" 4k MVA Corsair K70 RGB 
PowerCaseMouseAudio
Corsair RM1000 Custom Build Logitech G900 Yamaha RX-V465 + 5.1 Surround 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › 3D Printed Waterfall Reservoir Concept