Overclock.net › Forums › Cooling › Water Cooling › Is my temps normal???
New Posts  All Forums:Forum Nav:

Is my temps normal??? - Page 2

post #11 of 131
Have you tried a more aggressive fan profile? Could also be a bubble in the rad. I'd turn the pump to 5 and give it a shake.
Hot n Bothered
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 4690k Asus Sabertooth Z97 MkII 2 EVGA GTX 980 FTW PNY 
RAMHard DriveHard DriveOptical Drive
Kingston 2x Kingston v300 120gb RAID 0 WD Blue ASUS 
CoolingOSMonitorPower
Cooler Master 212 Evo Windows 7 HP w2408h NZXT HALE82 V2 
CaseOther
Corsair 450D I have pretty lights.  
  hide details  
Reply
Hot n Bothered
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 4690k Asus Sabertooth Z97 MkII 2 EVGA GTX 980 FTW PNY 
RAMHard DriveHard DriveOptical Drive
Kingston 2x Kingston v300 120gb RAID 0 WD Blue ASUS 
CoolingOSMonitorPower
Cooler Master 212 Evo Windows 7 HP w2408h NZXT HALE82 V2 
CaseOther
Corsair 450D I have pretty lights.  
  hide details  
Reply
post #12 of 131
is your 980ti at the msi factory over clock or have you raised the core clock more?
I'm finding quite a few 970 980 and 980 ti gpu's running 55c to 65c running the Witcher 3 water cooled.
Old X58
(17 items)
 
  
CPUMotherboardGraphicsRAM
i7 970 6 core ASUS Sabertooth X58 MSI GTX 1070 Gaming X GSkill 24 gigs 
Hard DriveHard DriveHard DriveCooling
Crucial MX100 256 gig Crucial M500 120gig WD VelociRaptor 1TB Noctua 
OSMonitorMonitorKeyboard
Windows 7 Pro 64bit LG 29inch widescreen DP LG 29inch widescreen DP Corsair K65 
PowerCaseMouseAudio
EVGA SuperNova G2 1000w Corsair C70 Corsair M65 Sound Blaster Z 
Other
Custom sleeved psu cables 
  hide details  
Reply
Old X58
(17 items)
 
  
CPUMotherboardGraphicsRAM
i7 970 6 core ASUS Sabertooth X58 MSI GTX 1070 Gaming X GSkill 24 gigs 
Hard DriveHard DriveHard DriveCooling
Crucial MX100 256 gig Crucial M500 120gig WD VelociRaptor 1TB Noctua 
OSMonitorMonitorKeyboard
Windows 7 Pro 64bit LG 29inch widescreen DP LG 29inch widescreen DP Corsair K65 
PowerCaseMouseAudio
EVGA SuperNova G2 1000w Corsair C70 Corsair M65 Sound Blaster Z 
Other
Custom sleeved psu cables 
  hide details  
Reply
post #13 of 131
Thread Starter 
It's factory overclocked none refrence GTX 980 Ti, boosts to around 1354Mhz, I just turned the pump to speed 5 and heard some bubbles pass and now tested again and temps stay around 64c-65c so a mere 2-3c drop, my fans are also all turned to low btw
    
CPUMotherboardGraphicsRAM
i7 6700K Asus Maximus VIII Hero MSI GTX 980 Ti G.Skill Trident Z 
Hard DriveHard DriveHard DriveOS
Samsing 850 Pro Samsung 850 Pro Samsung 850 Evo Windows 10 Pro 
PowerCase
EVGA Supernova 1000w P2 Phanteks Enthoo Evolve ATX 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 6700K Asus Maximus VIII Hero MSI GTX 980 Ti G.Skill Trident Z 
Hard DriveHard DriveHard DriveOS
Samsing 850 Pro Samsung 850 Pro Samsung 850 Evo Windows 10 Pro 
PowerCase
EVGA Supernova 1000w P2 Phanteks Enthoo Evolve ATX 
  hide details  
Reply
post #14 of 131
Quote:
Originally Posted by I-Siamak-I View Post

It's factory overclocked none refrence GTX 980 Ti, boosts to around 1354Mhz, I just turned the pump to speed 5 and heard some bubbles pass and now tested again and temps stay around 64c-65c so a mere 2-3c drop, my fans are also all turned to low btw

I'm seeing users having to run the fans a little higher in your situation, try higher fan speed and post back.
I think you are making progress, and keep listening for the air bubbles.
Old X58
(17 items)
 
  
CPUMotherboardGraphicsRAM
i7 970 6 core ASUS Sabertooth X58 MSI GTX 1070 Gaming X GSkill 24 gigs 
Hard DriveHard DriveHard DriveCooling
Crucial MX100 256 gig Crucial M500 120gig WD VelociRaptor 1TB Noctua 
OSMonitorMonitorKeyboard
Windows 7 Pro 64bit LG 29inch widescreen DP LG 29inch widescreen DP Corsair K65 
PowerCaseMouseAudio
EVGA SuperNova G2 1000w Corsair C70 Corsair M65 Sound Blaster Z 
Other
Custom sleeved psu cables 
  hide details  
Reply
Old X58
(17 items)
 
  
CPUMotherboardGraphicsRAM
i7 970 6 core ASUS Sabertooth X58 MSI GTX 1070 Gaming X GSkill 24 gigs 
Hard DriveHard DriveHard DriveCooling
Crucial MX100 256 gig Crucial M500 120gig WD VelociRaptor 1TB Noctua 
OSMonitorMonitorKeyboard
Windows 7 Pro 64bit LG 29inch widescreen DP LG 29inch widescreen DP Corsair K65 
PowerCaseMouseAudio
EVGA SuperNova G2 1000w Corsair C70 Corsair M65 Sound Blaster Z 
Other
Custom sleeved psu cables 
  hide details  
Reply
post #15 of 131
Thread Starter 
Ok, progress, left the case tilted a bit and left the fans at 50%, pump at speed 5 and I hear a lot of bubble sound, also inside my reservoir sidewall is filled with microbubles, is this normal? I just finished the build last night and never done this, now after 25min of Witcher 3 while doing all this my temp does not go above 62c. it just goes between 61-62c
    
CPUMotherboardGraphicsRAM
i7 6700K Asus Maximus VIII Hero MSI GTX 980 Ti G.Skill Trident Z 
Hard DriveHard DriveHard DriveOS
Samsing 850 Pro Samsung 850 Pro Samsung 850 Evo Windows 10 Pro 
PowerCase
EVGA Supernova 1000w P2 Phanteks Enthoo Evolve ATX 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 6700K Asus Maximus VIII Hero MSI GTX 980 Ti G.Skill Trident Z 
Hard DriveHard DriveHard DriveOS
Samsing 850 Pro Samsung 850 Pro Samsung 850 Evo Windows 10 Pro 
PowerCase
EVGA Supernova 1000w P2 Phanteks Enthoo Evolve ATX 
  hide details  
Reply
post #16 of 131
Thread Starter 
Ok Im hearing even more gurgling sounds and the wierdest thing is my temp started going down 1c at a time, I am now at 59-60c, should Open the little G 1/4 stop fitting at the top of my reservoir while bleeding air?
    
CPUMotherboardGraphicsRAM
i7 6700K Asus Maximus VIII Hero MSI GTX 980 Ti G.Skill Trident Z 
Hard DriveHard DriveHard DriveOS
Samsing 850 Pro Samsung 850 Pro Samsung 850 Evo Windows 10 Pro 
PowerCase
EVGA Supernova 1000w P2 Phanteks Enthoo Evolve ATX 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 6700K Asus Maximus VIII Hero MSI GTX 980 Ti G.Skill Trident Z 
Hard DriveHard DriveHard DriveOS
Samsing 850 Pro Samsung 850 Pro Samsung 850 Evo Windows 10 Pro 
PowerCase
EVGA Supernova 1000w P2 Phanteks Enthoo Evolve ATX 
  hide details  
Reply
post #17 of 131
Quote:
Originally Posted by I-Siamak-I View Post

Ok, progress, left the case tilted a bit and left the fans at 50%, pump at speed 5 and I hear a lot of bubble sound, also inside my reservoir sidewall is filled with microbubles, is this normal? I just finished the build last night and never done this, now after 25min of Witcher 3 while doing all this my temp does not go above 62c. it just goes between 61-62c

I have read and seen pics of users lay their computer on it's side and the temps dropped, after they did research to find out why the temps were better this way it was due to air in the liquid cooling system.
maybe just run it for awhile longer and see if it get's better, if not then I would purge the cooling system again.
Old X58
(17 items)
 
  
CPUMotherboardGraphicsRAM
i7 970 6 core ASUS Sabertooth X58 MSI GTX 1070 Gaming X GSkill 24 gigs 
Hard DriveHard DriveHard DriveCooling
Crucial MX100 256 gig Crucial M500 120gig WD VelociRaptor 1TB Noctua 
OSMonitorMonitorKeyboard
Windows 7 Pro 64bit LG 29inch widescreen DP LG 29inch widescreen DP Corsair K65 
PowerCaseMouseAudio
EVGA SuperNova G2 1000w Corsair C70 Corsair M65 Sound Blaster Z 
Other
Custom sleeved psu cables 
  hide details  
Reply
Old X58
(17 items)
 
  
CPUMotherboardGraphicsRAM
i7 970 6 core ASUS Sabertooth X58 MSI GTX 1070 Gaming X GSkill 24 gigs 
Hard DriveHard DriveHard DriveCooling
Crucial MX100 256 gig Crucial M500 120gig WD VelociRaptor 1TB Noctua 
OSMonitorMonitorKeyboard
Windows 7 Pro 64bit LG 29inch widescreen DP LG 29inch widescreen DP Corsair K65 
PowerCaseMouseAudio
EVGA SuperNova G2 1000w Corsair C70 Corsair M65 Sound Blaster Z 
Other
Custom sleeved psu cables 
  hide details  
Reply
post #18 of 131
Thread Starter 
I am now at 58c with Witcher 3 still running for the past 50min and my case being on the desk in normal orientation thumb.gif, should Open the little G 1/4 stop fitting at the top of my reservoir while bleeding air?

Is the Microbubbles inside my Reservoir sidewall normal? there are all around the sidewall
    
CPUMotherboardGraphicsRAM
i7 6700K Asus Maximus VIII Hero MSI GTX 980 Ti G.Skill Trident Z 
Hard DriveHard DriveHard DriveOS
Samsing 850 Pro Samsung 850 Pro Samsung 850 Evo Windows 10 Pro 
PowerCase
EVGA Supernova 1000w P2 Phanteks Enthoo Evolve ATX 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 6700K Asus Maximus VIII Hero MSI GTX 980 Ti G.Skill Trident Z 
Hard DriveHard DriveHard DriveOS
Samsing 850 Pro Samsung 850 Pro Samsung 850 Evo Windows 10 Pro 
PowerCase
EVGA Supernova 1000w P2 Phanteks Enthoo Evolve ATX 
  hide details  
Reply
post #19 of 131
Quote:
Originally Posted by I-Siamak-I View Post

I am now at 58c with Witcher 3 still running for the past 50min and my case being on the desk in normal orientation thumb.gif, should Open the little G 1/4 stop fitting at the top of my reservoir while bleeding air?

Is the Microbubbles inside my Reservoir sidewall normal? there are all around the sidewall

if it was me yes I would try and purge/bleed some more air out.
from my experience the micro bubbles are not normal, although I have only seen them in one system in all my years and the guy had high temp issue's until he finally got them out.
Old X58
(17 items)
 
  
CPUMotherboardGraphicsRAM
i7 970 6 core ASUS Sabertooth X58 MSI GTX 1070 Gaming X GSkill 24 gigs 
Hard DriveHard DriveHard DriveCooling
Crucial MX100 256 gig Crucial M500 120gig WD VelociRaptor 1TB Noctua 
OSMonitorMonitorKeyboard
Windows 7 Pro 64bit LG 29inch widescreen DP LG 29inch widescreen DP Corsair K65 
PowerCaseMouseAudio
EVGA SuperNova G2 1000w Corsair C70 Corsair M65 Sound Blaster Z 
Other
Custom sleeved psu cables 
  hide details  
Reply
Old X58
(17 items)
 
  
CPUMotherboardGraphicsRAM
i7 970 6 core ASUS Sabertooth X58 MSI GTX 1070 Gaming X GSkill 24 gigs 
Hard DriveHard DriveHard DriveCooling
Crucial MX100 256 gig Crucial M500 120gig WD VelociRaptor 1TB Noctua 
OSMonitorMonitorKeyboard
Windows 7 Pro 64bit LG 29inch widescreen DP LG 29inch widescreen DP Corsair K65 
PowerCaseMouseAudio
EVGA SuperNova G2 1000w Corsair C70 Corsair M65 Sound Blaster Z 
Other
Custom sleeved psu cables 
  hide details  
Reply
post #20 of 131
Thread Starter 
Quote:
Originally Posted by jlhawn View Post

if it was me yes I would try and purge/bleed some more air out.
from my experience the micro bubbles are not normal, although I have only seen them in one system in all my years and the guy had high temp issue's until he finally got them out.
Ok by purging/bleeding you mean empty the water from the whole system and put new liquid in? or just open the top of the Reservoir and leave the system as is till bubbles are out?
    
CPUMotherboardGraphicsRAM
i7 6700K Asus Maximus VIII Hero MSI GTX 980 Ti G.Skill Trident Z 
Hard DriveHard DriveHard DriveOS
Samsing 850 Pro Samsung 850 Pro Samsung 850 Evo Windows 10 Pro 
PowerCase
EVGA Supernova 1000w P2 Phanteks Enthoo Evolve ATX 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 6700K Asus Maximus VIII Hero MSI GTX 980 Ti G.Skill Trident Z 
Hard DriveHard DriveHard DriveOS
Samsing 850 Pro Samsung 850 Pro Samsung 850 Evo Windows 10 Pro 
PowerCase
EVGA Supernova 1000w P2 Phanteks Enthoo Evolve ATX 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › Is my temps normal???