Overclock.net › Forums › Cooling › Water Cooling › Is my temps normal???
New Posts  All Forums:Forum Nav:

Is my temps normal??? - Page 3

post #21 of 131
Quote:
Originally Posted by I-Siamak-I View Post

Ok by purging/bleeding you mean empty the water from the whole system and put new liquid in? or just open the top of the Reservoir and leave the system as is till bubbles are out?

I power off the system and connect power to the pump only and then open the reservoir plug.
also tapping on the reservoir while the systems running and fill cap closed can get the micro bubbles to break free, after just run it for another 24 hours and it should not need any purging.
Edited by jlhawn - 11/6/15 at 9:15pm
Old X58
(17 items)
 
  
CPUMotherboardGraphicsRAM
i7 970 6 core ASUS Sabertooth X58 MSI GTX 1070 Gaming X GSkill 24 gigs 
Hard DriveHard DriveHard DriveCooling
Crucial MX100 256 gig Crucial M500 120gig WD VelociRaptor 1TB Noctua 
OSMonitorMonitorKeyboard
Windows 7 Pro 64bit LG 29inch widescreen DP LG 29inch widescreen DP Corsair K65 
PowerCaseMouseAudio
EVGA SuperNova G2 1000w Corsair C70 Corsair M65 Sound Blaster Z 
Other
Custom sleeved psu cables 
  hide details  
Reply
Old X58
(17 items)
 
  
CPUMotherboardGraphicsRAM
i7 970 6 core ASUS Sabertooth X58 MSI GTX 1070 Gaming X GSkill 24 gigs 
Hard DriveHard DriveHard DriveCooling
Crucial MX100 256 gig Crucial M500 120gig WD VelociRaptor 1TB Noctua 
OSMonitorMonitorKeyboard
Windows 7 Pro 64bit LG 29inch widescreen DP LG 29inch widescreen DP Corsair K65 
PowerCaseMouseAudio
EVGA SuperNova G2 1000w Corsair C70 Corsair M65 Sound Blaster Z 
Other
Custom sleeved psu cables 
  hide details  
Reply
post #22 of 131
Thread Starter 
Here is how my reservoir looks now
    
CPUMotherboardGraphicsRAM
i7 6700K Asus Maximus VIII Hero MSI GTX 980 Ti G.Skill Trident Z 
Hard DriveHard DriveHard DriveOS
Samsing 850 Pro Samsung 850 Pro Samsung 850 Evo Windows 10 Pro 
PowerCase
EVGA Supernova 1000w P2 Phanteks Enthoo Evolve ATX 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 6700K Asus Maximus VIII Hero MSI GTX 980 Ti G.Skill Trident Z 
Hard DriveHard DriveHard DriveOS
Samsing 850 Pro Samsung 850 Pro Samsung 850 Evo Windows 10 Pro 
PowerCase
EVGA Supernova 1000w P2 Phanteks Enthoo Evolve ATX 
  hide details  
Reply
post #23 of 131
Thread Starter 
Here is how my entire loop looks, tell me if you see anything wrong with it

    
CPUMotherboardGraphicsRAM
i7 6700K Asus Maximus VIII Hero MSI GTX 980 Ti G.Skill Trident Z 
Hard DriveHard DriveHard DriveOS
Samsing 850 Pro Samsung 850 Pro Samsung 850 Evo Windows 10 Pro 
PowerCase
EVGA Supernova 1000w P2 Phanteks Enthoo Evolve ATX 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 6700K Asus Maximus VIII Hero MSI GTX 980 Ti G.Skill Trident Z 
Hard DriveHard DriveHard DriveOS
Samsing 850 Pro Samsung 850 Pro Samsung 850 Evo Windows 10 Pro 
PowerCase
EVGA Supernova 1000w P2 Phanteks Enthoo Evolve ATX 
  hide details  
Reply
post #24 of 131
Quote:
Originally Posted by I-Siamak-I View Post

Here is how my reservoir looks now

yeah try tapping on it while it's running to get those bubbles to break free and then bleed it.
Old X58
(17 items)
 
  
CPUMotherboardGraphicsRAM
i7 970 6 core ASUS Sabertooth X58 MSI GTX 1070 Gaming X GSkill 24 gigs 
Hard DriveHard DriveHard DriveCooling
Crucial MX100 256 gig Crucial M500 120gig WD VelociRaptor 1TB Noctua 
OSMonitorMonitorKeyboard
Windows 7 Pro 64bit LG 29inch widescreen DP LG 29inch widescreen DP Corsair K65 
PowerCaseMouseAudio
EVGA SuperNova G2 1000w Corsair C70 Corsair M65 Sound Blaster Z 
Other
Custom sleeved psu cables 
  hide details  
Reply
Old X58
(17 items)
 
  
CPUMotherboardGraphicsRAM
i7 970 6 core ASUS Sabertooth X58 MSI GTX 1070 Gaming X GSkill 24 gigs 
Hard DriveHard DriveHard DriveCooling
Crucial MX100 256 gig Crucial M500 120gig WD VelociRaptor 1TB Noctua 
OSMonitorMonitorKeyboard
Windows 7 Pro 64bit LG 29inch widescreen DP LG 29inch widescreen DP Corsair K65 
PowerCaseMouseAudio
EVGA SuperNova G2 1000w Corsair C70 Corsair M65 Sound Blaster Z 
Other
Custom sleeved psu cables 
  hide details  
Reply
post #25 of 131
I like them to look like this. it's not mine, belongs to a friend. I put together liquid systems for friends but my personal systems are air cooled.
Old X58
(17 items)
 
  
CPUMotherboardGraphicsRAM
i7 970 6 core ASUS Sabertooth X58 MSI GTX 1070 Gaming X GSkill 24 gigs 
Hard DriveHard DriveHard DriveCooling
Crucial MX100 256 gig Crucial M500 120gig WD VelociRaptor 1TB Noctua 
OSMonitorMonitorKeyboard
Windows 7 Pro 64bit LG 29inch widescreen DP LG 29inch widescreen DP Corsair K65 
PowerCaseMouseAudio
EVGA SuperNova G2 1000w Corsair C70 Corsair M65 Sound Blaster Z 
Other
Custom sleeved psu cables 
  hide details  
Reply
Old X58
(17 items)
 
  
CPUMotherboardGraphicsRAM
i7 970 6 core ASUS Sabertooth X58 MSI GTX 1070 Gaming X GSkill 24 gigs 
Hard DriveHard DriveHard DriveCooling
Crucial MX100 256 gig Crucial M500 120gig WD VelociRaptor 1TB Noctua 
OSMonitorMonitorKeyboard
Windows 7 Pro 64bit LG 29inch widescreen DP LG 29inch widescreen DP Corsair K65 
PowerCaseMouseAudio
EVGA SuperNova G2 1000w Corsair C70 Corsair M65 Sound Blaster Z 
Other
Custom sleeved psu cables 
  hide details  
Reply
post #26 of 131
most users just run the system for another 24 to 48 hours and the air goes away, I just don't like waiting is the reason for what I do.
so if you want to try just run it longer and it should be good.
Old X58
(17 items)
 
  
CPUMotherboardGraphicsRAM
i7 970 6 core ASUS Sabertooth X58 MSI GTX 1070 Gaming X GSkill 24 gigs 
Hard DriveHard DriveHard DriveCooling
Crucial MX100 256 gig Crucial M500 120gig WD VelociRaptor 1TB Noctua 
OSMonitorMonitorKeyboard
Windows 7 Pro 64bit LG 29inch widescreen DP LG 29inch widescreen DP Corsair K65 
PowerCaseMouseAudio
EVGA SuperNova G2 1000w Corsair C70 Corsair M65 Sound Blaster Z 
Other
Custom sleeved psu cables 
  hide details  
Reply
Old X58
(17 items)
 
  
CPUMotherboardGraphicsRAM
i7 970 6 core ASUS Sabertooth X58 MSI GTX 1070 Gaming X GSkill 24 gigs 
Hard DriveHard DriveHard DriveCooling
Crucial MX100 256 gig Crucial M500 120gig WD VelociRaptor 1TB Noctua 
OSMonitorMonitorKeyboard
Windows 7 Pro 64bit LG 29inch widescreen DP LG 29inch widescreen DP Corsair K65 
PowerCaseMouseAudio
EVGA SuperNova G2 1000w Corsair C70 Corsair M65 Sound Blaster Z 
Other
Custom sleeved psu cables 
  hide details  
Reply
post #27 of 131
24 hours is enough to get most of the bubbles out. I've found though running at a slower speed (3 on the D5) helps to expel the stubborn bubbles. Also my GPU block seemed to be the gathering place for bubbles, as every time I heard my pump slosh all the bubbles would inevitably end up in the GPU block. Drove me crazy at first but after using the computer normally for 2 weeks the last few bubbles eventually worked their way out.

I probably could've made things go a lot faster if I tried tipping/shaking the case, but I'm way too lazy for that. tongue.gif
post #28 of 131
Quote:
Originally Posted by I-Siamak-I View Post

Here is how my entire loop looks, tell me if you see anything wrong with it


Since it looks pretty dang good, gonna have to get nit picky... sleeve those pump wires and maybe find some way to hide the mobo header wires?
 
Spare Parts
(8 items)
 
 
CPUMotherboardGraphicsRAM
intel i5 750 Lynnfield Gigabyte GA-P55-USB3 ASUS Strix GTX 960 G.SKILL Ripjaws X Series 16GB (2 x 8GB) 240-Pin... 
Hard DriveCoolingCoolingCooling
Crucial BX100 SSD 500GB EKWB EK-KIT L120 Corsair SP120 Koolance 2x140mm Radiator HX-CU1402V 
CoolingCoolingOSMonitor
Corsair AF140 Bitspower VG-NGTX960 Windows 7 Ultimate 64 bit Samsung Curved 27" S27D590C 
KeyboardPowerCaseMouse
Corsair Strafe RGB Apevia Iceburg 680 watts Apevia X-Sniper 2 EVGA Torq X3 Laser 
CPUMotherboardGraphicsRAM
AMD Phenom 9750 ASUS M3A78-CM PNY XLR8 GTX 460 Corsair XMS2 (4 x 1GB) 
Hard DriveCoolingCoolingPower
Hitachi 5K500 Silenx 92mm EFFIZIO Corsair SP 120 Red LED Antec 500watt 
CPUMotherboardGraphicsRAM
Intel Core i5-6400 Skylake ASRock A170A-X1/3.1 Gigabye G1 Gaming GTX 970 Windforce CORSAIR Vengeance LPX 16GB (4 x 4GB) 288-Pin DD... 
CoolingCoolingCoolingCooling
Bykski CPU-XPR-A High Performance Acrylic Nicke... EKWB Acrylic Nickel GPU Block Monsoon MMRS Reservoir Bykski BY-PUMP-XPH-PA Water Cooling Pump 
CoolingCoolingCoolingCooling
Koolance 240 30 FPI Radiator Magicool 280 14 FPI Radiator Bitfenix Spectre PWM 120mm Fan ML140 140mm PWM Premium Magnetic Levitation Fan 
OSPowerCase
Windows 10 Pro Corsair RM Series 850 Thermaltake Suppressor F31 
  hide details  
Reply
 
Spare Parts
(8 items)
 
 
CPUMotherboardGraphicsRAM
intel i5 750 Lynnfield Gigabyte GA-P55-USB3 ASUS Strix GTX 960 G.SKILL Ripjaws X Series 16GB (2 x 8GB) 240-Pin... 
Hard DriveCoolingCoolingCooling
Crucial BX100 SSD 500GB EKWB EK-KIT L120 Corsair SP120 Koolance 2x140mm Radiator HX-CU1402V 
CoolingCoolingOSMonitor
Corsair AF140 Bitspower VG-NGTX960 Windows 7 Ultimate 64 bit Samsung Curved 27" S27D590C 
KeyboardPowerCaseMouse
Corsair Strafe RGB Apevia Iceburg 680 watts Apevia X-Sniper 2 EVGA Torq X3 Laser 
CPUMotherboardGraphicsRAM
AMD Phenom 9750 ASUS M3A78-CM PNY XLR8 GTX 460 Corsair XMS2 (4 x 1GB) 
Hard DriveCoolingCoolingPower
Hitachi 5K500 Silenx 92mm EFFIZIO Corsair SP 120 Red LED Antec 500watt 
CPUMotherboardGraphicsRAM
Intel Core i5-6400 Skylake ASRock A170A-X1/3.1 Gigabye G1 Gaming GTX 970 Windforce CORSAIR Vengeance LPX 16GB (4 x 4GB) 288-Pin DD... 
CoolingCoolingCoolingCooling
Bykski CPU-XPR-A High Performance Acrylic Nicke... EKWB Acrylic Nickel GPU Block Monsoon MMRS Reservoir Bykski BY-PUMP-XPH-PA Water Cooling Pump 
CoolingCoolingCoolingCooling
Koolance 240 30 FPI Radiator Magicool 280 14 FPI Radiator Bitfenix Spectre PWM 120mm Fan ML140 140mm PWM Premium Magnetic Levitation Fan 
OSPowerCase
Windows 10 Pro Corsair RM Series 850 Thermaltake Suppressor F31 
  hide details  
Reply
post #29 of 131
Thread Starter 
Ok something bad happened last night, I have all 6 fans inside ny case connected to my case 6 channel fan controller, last night I tried to plug the fan controller PWM cable to my MB Fan_3 header ( originally was connected to CPU fan header per case manual ) and i did that while PC was running and then boom...... a small sparkle from the Fan_3 header or the fan hub PWM cable ( not so sure ), system works just fine and i inspected the entire ports and MB and cant see any sign of damage anywhere, my OCD is really bothering me, should I be worried? Would you replace the MB? Please advise....


Edit: Burn smell was coming from the Phantek 6 channel fan hub PWM cable
    
CPUMotherboardGraphicsRAM
i7 6700K Asus Maximus VIII Hero MSI GTX 980 Ti G.Skill Trident Z 
Hard DriveHard DriveHard DriveOS
Samsing 850 Pro Samsung 850 Pro Samsung 850 Evo Windows 10 Pro 
PowerCase
EVGA Supernova 1000w P2 Phanteks Enthoo Evolve ATX 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 6700K Asus Maximus VIII Hero MSI GTX 980 Ti G.Skill Trident Z 
Hard DriveHard DriveHard DriveOS
Samsing 850 Pro Samsung 850 Pro Samsung 850 Evo Windows 10 Pro 
PowerCase
EVGA Supernova 1000w P2 Phanteks Enthoo Evolve ATX 
  hide details  
Reply
post #30 of 131
you should always turn of all power before doing any work on your system, that being said 4 years ago with my current system I was installing a fan power extension cable while my system was running doh.gif, it was already connected to my mother boards NB fan header when I dropped the power cable and it landed in the bottom of my case and I had sparks and electrical burning smell. I turned everything off and connected the fan cable then powered up my system and it is still running as I type here today this with no problem. but now I never touch anything in my case until I power it down. in your case the spark was just from connecting an item to a live power source just like if you connect a battery in a car with the headlight switch on, you get a spark and a little smoke off the battery post and cable. I think it will be fine.
Edited by jlhawn - 11/7/15 at 11:51am
Old X58
(17 items)
 
  
CPUMotherboardGraphicsRAM
i7 970 6 core ASUS Sabertooth X58 MSI GTX 1070 Gaming X GSkill 24 gigs 
Hard DriveHard DriveHard DriveCooling
Crucial MX100 256 gig Crucial M500 120gig WD VelociRaptor 1TB Noctua 
OSMonitorMonitorKeyboard
Windows 7 Pro 64bit LG 29inch widescreen DP LG 29inch widescreen DP Corsair K65 
PowerCaseMouseAudio
EVGA SuperNova G2 1000w Corsair C70 Corsair M65 Sound Blaster Z 
Other
Custom sleeved psu cables 
  hide details  
Reply
Old X58
(17 items)
 
  
CPUMotherboardGraphicsRAM
i7 970 6 core ASUS Sabertooth X58 MSI GTX 1070 Gaming X GSkill 24 gigs 
Hard DriveHard DriveHard DriveCooling
Crucial MX100 256 gig Crucial M500 120gig WD VelociRaptor 1TB Noctua 
OSMonitorMonitorKeyboard
Windows 7 Pro 64bit LG 29inch widescreen DP LG 29inch widescreen DP Corsair K65 
PowerCaseMouseAudio
EVGA SuperNova G2 1000w Corsair C70 Corsair M65 Sound Blaster Z 
Other
Custom sleeved psu cables 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › Is my temps normal???