Overclock.net › Forums › Components › Monitors and Displays › Acer XB271HU- share your experience and show pics!
New Posts  All Forums:Forum Nav:

Acer XB271HU- share your experience and show pics! - Page 365

post #3641 of 7668
Quote:
Originally Posted by atomicus View Post

FFS, this now really adds an extra layer of complexity to the lottery that you enter in to buying this monitor in the first place! Now you can't even trust what you see when you first turn it on!! When will this torture end, I just want to buy a monitor that works properly [sob] ARRGGGHHHHH!!! mad.gif

Is this the ACER's beta project for 27' IPS panel at 144hz/165hz , 2,560 x 1,440 resolution, 16:9 with g-sync ? biggrin.gif
I want to participate in it but i want a beta price thumb.gif
Edited by ToKuten - 2/13/16 at 5:00am
post #3642 of 7668
Just received my first XB271HU after 3-4 failed PG279Qs. It's not good.... found a speck of dust in the middle of the panel close to the center and to top it off the monitor actually went out of sync before and after calibrating it.


Sorry for the really bad camera quality if you look closely there is a line in the middle where the two halves of the display leave a gap. Better luck next time wink.gif
post #3643 of 7668
FUUUUCKKKKKKKK frown.gif

JACKPOT with 3 Dust particles FUUUUCK frown.gif

0 BLB FUUUUCKKK frown.gif





plz plz plz help me how i can clean this Dust particles ?
post #3644 of 7668
Quote:
Originally Posted by Lotty View Post

FUUUUCKKKKKKKK frown.gif

JACKPOT with 3 Dust particles FUUUUCK frown.gif

0 BLB FUUUUCKKK frown.gif





plz plz plz help me how i can clean this Dust particles ?


Don't be too sad I've hit the **** jackpot too smile.gif

just take a look at the idiotic issues with this monitor lol. I have 3 for surround and there all going back smile.gif


#1) Can we say hello to insane uniformity issues? My middle screen is yellow my side ones are totally different.
#2) Dead pixels or dust yay!
#3) Bezels don't align flush leaving this nasty gap because of the monitors design ROFL smile.gif
#4) Got some God Ray type BLB from the predator logo shining upwards

Needless to say there all going back and I'm going to try my luck with PG279Q's. I know there retention method is different but atleast I can align the bezels for a surround setup to leave no gap.

<- TRolololololo Seriously AU optronics?? LIke this is QC?



I'll just say this I'll NEVER USE a 60hz panel again my god the insane difference. Was using HP ZR30W's before. Now this is the sad part it's either Ultrawide 100hz issues and or the panel lottery from these AU panels.
Edited by nyxagamemnon - 2/13/16 at 2:13pm
post #3645 of 7668
Quote:
Originally Posted by nyxagamemnon View Post

Needless to say there all going back and I'm going to try my luck with PG279Q's. I know there retention method is different but atleast I can align the bezels for a surround setup to leave no gap.

<- TRolololololo Seriously AU optronics?? LIke this is QC?

That picture is just RIDICULOUS... man these panels really can suck! Is there such a thing as a good PG279Q though? I genuinely thought they were all bad, and only people who are registered blind or who think these faults are normal on a "premium" monitor are keeping them?! At least SOME decent XB271's seem to be floating around based on what I've seen.
I AM TITANIUM
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7-6800K MSI X99A XPower Gaming Titanium EVGA GeForce GTX 1080 FOUNDERS EDITION Corsair Dominator Platinum 32GB (4x8GB) 3000MHz... 
Hard DriveHard DriveHard DriveCooling
Samsung 950 Pro 256GB M.2 SanDisk Ultra II SSD 960GB Hynix SSD 500GB EKWB Custom loop 
OSMonitorKeyboardCase
Windows 10 Pro 64bit Acer Predator X34 Logitech K800 InWin 303 
MouseMouse PadAudio
Logitech G900 Corsair MM300 Sennheiser DT 990 Pro (250OHM) 
  hide details  
Reply
I AM TITANIUM
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7-6800K MSI X99A XPower Gaming Titanium EVGA GeForce GTX 1080 FOUNDERS EDITION Corsair Dominator Platinum 32GB (4x8GB) 3000MHz... 
Hard DriveHard DriveHard DriveCooling
Samsung 950 Pro 256GB M.2 SanDisk Ultra II SSD 960GB Hynix SSD 500GB EKWB Custom loop 
OSMonitorKeyboardCase
Windows 10 Pro 64bit Acer Predator X34 Logitech K800 InWin 303 
MouseMouse PadAudio
Logitech G900 Corsair MM300 Sennheiser DT 990 Pro (250OHM) 
  hide details  
Reply
post #3646 of 7668
Quote:
Originally Posted by nyxagamemnon View Post

Don't be too sad I've hit the **** jackpot too smile.gif

just take a look at the idiotic issues with this monitor lol. I have 3 for surround and there all going back smile.gif


#1) Can we say hello to insane uniformity issues? My middle screen is yellow my side ones are totally different.
#2) Dead pixels or dust yay!
#3) Bezels don't align flush leaving this nasty gap because of the monitors design ROFL smile.gif
#4) Got some God Ray type BLB from the predator logo shining upwards

Needless to say there all going back and I'm going to try my luck with PG279Q's. I know there retention method is different but atleast I can align the bezels for a surround setup to leave no gap.

I'll just say this I'll NEVER USE a 60hz panel again my god the insane difference. Was using HP ZR30W's before. Now this is the sad part it's either Ultrawide 100hz issues and or the panel lottery from these AU panels.
Can you calibrate / adjust the middle screen at all? If it is uniform then you should be able to make the whites cooler?
post #3647 of 7668
Quote:
Originally Posted by jlp0209 View Post

Can you calibrate / adjust the middle screen at all? If it is uniform then you should be able to make the whites cooler?

Doesnt do anything the whole panel has this yellow tint. Any chnages its just laced with a yellow color.

It's like looking at the monitor with gunner glasses lol.
post #3648 of 7668
Hey does anybody know if the XB271HUs at NCIXUS are open box/ returns?

A couple of days ago there was only 1 left in stock, but now there's 3 (as of 2/14/2016). Any help would be appreciated since I'm looking to join XB271HU club some time next month.

Thanks
post #3649 of 7668
On my 7th one. This one has a translucent spot in the bottom right corner behind the LCD and horrible BLB.

F*** this monitor. F*** Acer.

It's ridiculous that such an expensive monitor has worse quality control than my old $150 monitor.

I'm now going to avoid Acer like the plague.
post #3650 of 7668
Really surprised to see these latest posts. This monitor produced many happy customers at first, including myself (October build). Seems maybe the QC has taken a bit of a dive the last couple of months? Here are pics of mine, and many others looks like this as well back in the September timeframe.



New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Monitors and Displays
Overclock.net › Forums › Components › Monitors and Displays › Acer XB271HU- share your experience and show pics!