Overclock.net › Forums › Specialty Builds › Small Form Factor Systems › NYMPHO mITX concept
New Posts  All Forums:Forum Nav:

NYMPHO mITX concept - Page 2

post #11 of 16
Does this case only fit R9 Nano? I think there is no space for top-side PEG conectors.
post #12 of 16
Thread Starter 
@niksus I was aiming at cards up to 170mm lenght like r9 nano,nvidia gtx 750ti,asus 970 mini,amd r9 285 mini and guys suggested that 125mm would be enough
post #13 of 16
Quote:
Originally Posted by Anzweidrej View Post

@niksus I was aiming at cards up to 170mm lenght like r9 nano,nvidia gtx 750ti,asus 970 mini,amd r9 285 mini and guys suggested that 125mm would be enough
It's enough for the R9 Nano, because it's a reference-height card and the power connector is at the end (i.e., they don't make it taller). The ASUS 970 DCU Mini is around 10mm taller than reference, and the power connector is on the top, which adds another 15-20mm. So you'd need to make the case at least 150mm wide if you wanted to support that card.
post #14 of 16
Thread Starter 
Quote:
Originally Posted by subtec View Post

It's enough for the R9 Nano, because it's a reference-height card and the power connector is at the end (i.e., they don't make it taller). The ASUS 970 DCU Mini is around 10mm taller than reference, and the power connector is on the top, which adds another 15-20mm. So you'd need to make the case at least 150mm wide if you wanted to support that card.

Thanks on heads up smile.gif
post #15 of 16
Quote:
Originally Posted by Anzweidrej View Post

@niksus I was aiming at cards up to 170mm lenght like r9 nano,nvidia gtx 750ti,asus 970 mini,amd r9 285 mini and guys suggested that 125mm would be enough

I thought the whole idea of this case was to limit the selection to cards with PEG connectors at the front in order to shrink the size down.
post #16 of 16
Thread Starter 
Quote:
Originally Posted by iFreilicht View Post

I thought the whole idea of this case was to limit the selection to cards with PEG connectors at the front in order to shrink the size down.

I dont bother with dimensions as for now,my main goal is to build a case foundation with aprox dimensions written in first post.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Small Form Factor Systems
Overclock.net › Forums › Specialty Builds › Small Form Factor Systems › NYMPHO mITX concept