Originally Posted by Wolftame
Did I get 2x J1 and no J3 jet plate with my EVO? The one on the far left was used inside the EVO and the two others were extras, I mounted the one on the far right that I think is the J2 (1150 socket).
J2 is .3mm thick with four notches in total, two of which are guide notches, two are identification notches.
That’s the one to use for your 115x CPU, the one on the far right in your photo.
The other two J1 and J3 have ONLY two guide notches, one is extremely thin, and that is the J3.
The EK EVO manual contains one text error and one illustration error, you guys found them both.
Here's another reference, on this page VSG explains the Supremacy EVO jet plates perfectly.
The EK manual contradicts itself two or three times.Edited by iBruce - 11/28/15 at 7:59pm