The only way to add a d5 pump in this case its with Alphacool HF D5 v3 Top which have one inlet and one outlet at the top of the block.
In the picture the ek top have the inlet only on the front so i have to replace it with the alphacool top. (Ek should add more thread for future tops)
There is no other way to install a d5 pump. I try any position , angle and combination.
The psu need to be installed at the end and there is no way to install the resevoir in a vertical position .
Positioning the reservoir orizontal will work but will make the loop difficult to bleed and i will not be able use mayhems aurora 2 liquid since the nano cell will stick in the reservoir causing me to dissamble the loop after 3 month which i dont want to.
Red pastel have discoloration issue.I need to think about a solution.
The only way to make it work its like the picture below.Edited by pompss - 1/3/16 at 10:18am