Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Build Logs › G1 4.6 Twin Turbo -Completed
New Posts  All Forums:Forum Nav:

G1 4.6 Twin Turbo -Completed - Page 5

post #41 of 64
Quote:
Originally Posted by orbitalwalsh View Post

I messed up the inlet and outlet holes in the casing and had to cut a square to save it all. Super gutted and depressing but will have it on the bottom, hopefully tubing will hide it a bit. Was a few mm off and ended up making it worse frown.gif

I think all of us have been there. frown.gif

It's all looking great, otherwise.
     
CPUMotherboardGraphicsRAM
5960X Rampage V Extreme EVGA 980Ti SC+ SLI'd 64GB Corsair LPX 2400 
Hard DriveCoolingOSMonitor
950 Pro 512GB / 850 Pro 512GB / 3x850 Pro 256GB... Water. Lots of water. How else is it going to run? 27" 2560x1440 x2 
KeyboardPowerCaseAudio
You bet. EVGA 1300 G2  Caselabs STH10+Ped Sure. 
Other
Some other knickknacks. 
CPUMotherboardGraphicsRAM
OC'd 3930K Asus Ramp EVGA 780 6GB SLI'd 32GB Mush E.Red 2133 
Hard DriveOptical DriveCoolingOS
256GB Sam 840 P / 2x250GB Sam 840 E / 2xTosh 3TBs Sitting outside the box. Water. Lots of water. How else is it going to run? 
KeyboardPowerCaseMouse
You bet. EVGA 1300 G2 Case Labs M8 + Ped Yep. 
Mouse PadAudioOther
The desk. Sure. Some other knickknacks. 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
5960X Rampage V Extreme EVGA 980Ti SC+ SLI'd 64GB Corsair LPX 2400 
Hard DriveCoolingOSMonitor
950 Pro 512GB / 850 Pro 512GB / 3x850 Pro 256GB... Water. Lots of water. How else is it going to run? 27" 2560x1440 x2 
KeyboardPowerCaseAudio
You bet. EVGA 1300 G2  Caselabs STH10+Ped Sure. 
Other
Some other knickknacks. 
CPUMotherboardGraphicsRAM
OC'd 3930K Asus Ramp EVGA 780 6GB SLI'd 32GB Mush E.Red 2133 
Hard DriveOptical DriveCoolingOS
256GB Sam 840 P / 2x250GB Sam 840 E / 2xTosh 3TBs Sitting outside the box. Water. Lots of water. How else is it going to run? 
KeyboardPowerCaseMouse
You bet. EVGA 1300 G2 Case Labs M8 + Ped Yep. 
Mouse PadAudioOther
The desk. Sure. Some other knickknacks. 
  hide details  
Reply
post #42 of 64
Thread Starter 
Quote:
Originally Posted by Minacious View Post

I think all of us have been there. frown.gif

It's all looking great, otherwise.

I could not stop swearing for an hour straight after, moment of madness almost left me ordering a 3rd card just to make it perfect.
Hoping the fact im using 16/10mm tubing and monsoon 90/chain gun it'll hide a lot and LED should give it a red glow
post #43 of 64
Thread Starter 
At last, been messed around and waiting ages,bit finally!!!
IMG_20160206_120830.jpg
Cheeky update since the baby and wife are asleep, as well as the second block and fittings being delayed...
I went and test fitted the first card straight onto the H240X removing the CPU block and using its fittings.
When the little on wakes up I'll plug it in and give a quick stress test
IMG_20160207_082052.jpg
Edited by orbitalwalsh - 2/7/16 at 12:35am
post #44 of 64
Thread Starter 
First test , GPU fan on auto and corsair SP fans at 500rpm IMG_20160209_173621.jpg

Still running at an OC of +123 core , +450 men , +12mv
post #45 of 64
Thread Starter 
Since my sons been awake since 4am thought of take a few snaps of arrivals

Should match colour scheme with a hint of red but not one dominate colour

Problem with the 16/10mm sizing...
Inlet is right, inlet is left.. To big so means tubing will come to the top cards inlet , from the outlet straight to to the seconds outlet, and a 90 back to rad. was hoping to go from outlet to inlet between the cards, but cant unless I dont mind it looking aesthetics....



Also the second alphacool block came long, same model number but a never version this time to my surprise

has a hole drilled out for the extra cap on the Turbo card which the Mini doesn't have.
that area still needs to be cut either way but nice to know they have updated their models.
post #46 of 64
Thread Starter 
Quick blast one unigine heaven left me with this





Other side of the screen had evga PX16 stating 570hz core and 3000/6000hz ram

Leant that any benches doesnt like cam running in background as my clocks were changed.

Ran again with cam closed boosted to 1480hz 7900hz ram, confirmed with px16

Second card, second attempt. Almost got the holes perfect :/

IMG_20160218_214235.jpg

IMG_20160218_214050.jpg
Edited by orbitalwalsh - 2/18/16 at 1:53pm
post #47 of 64
Some light sandpapering to smooth/finish the edges and I think you're golden with that second attempt.
     
CPUMotherboardGraphicsRAM
5960X Rampage V Extreme EVGA 980Ti SC+ SLI'd 64GB Corsair LPX 2400 
Hard DriveCoolingOSMonitor
950 Pro 512GB / 850 Pro 512GB / 3x850 Pro 256GB... Water. Lots of water. How else is it going to run? 27" 2560x1440 x2 
KeyboardPowerCaseAudio
You bet. EVGA 1300 G2  Caselabs STH10+Ped Sure. 
Other
Some other knickknacks. 
CPUMotherboardGraphicsRAM
OC'd 3930K Asus Ramp EVGA 780 6GB SLI'd 32GB Mush E.Red 2133 
Hard DriveOptical DriveCoolingOS
256GB Sam 840 P / 2x250GB Sam 840 E / 2xTosh 3TBs Sitting outside the box. Water. Lots of water. How else is it going to run? 
KeyboardPowerCaseMouse
You bet. EVGA 1300 G2 Case Labs M8 + Ped Yep. 
Mouse PadAudioOther
The desk. Sure. Some other knickknacks. 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
5960X Rampage V Extreme EVGA 980Ti SC+ SLI'd 64GB Corsair LPX 2400 
Hard DriveCoolingOSMonitor
950 Pro 512GB / 850 Pro 512GB / 3x850 Pro 256GB... Water. Lots of water. How else is it going to run? 27" 2560x1440 x2 
KeyboardPowerCaseAudio
You bet. EVGA 1300 G2  Caselabs STH10+Ped Sure. 
Other
Some other knickknacks. 
CPUMotherboardGraphicsRAM
OC'd 3930K Asus Ramp EVGA 780 6GB SLI'd 32GB Mush E.Red 2133 
Hard DriveOptical DriveCoolingOS
256GB Sam 840 P / 2x250GB Sam 840 E / 2xTosh 3TBs Sitting outside the box. Water. Lots of water. How else is it going to run? 
KeyboardPowerCaseMouse
You bet. EVGA 1300 G2 Case Labs M8 + Ped Yep. 
Mouse PadAudioOther
The desk. Sure. Some other knickknacks. 
  hide details  
Reply
post #48 of 64
Thread Starter 
Quote:
Originally Posted by Minacious View Post

Some light sandpapering to smooth/finish the edges and I think you're golden with that second attempt.

Cheers, i did do a bit but not as much as i should of those frown.gif

Been thinking about 3D printing these shrouds off for the 980/Ti strix version since the fan is at the end .
post #49 of 64
Thread Starter 
Three cheeky teaser shots smile.gif

IMG_20160221_071121.jpg

Clear tubing is in between the GPUs , pain to do but will show off the red liquid nicely IMG_20160221_153718.jpg
IMG_20160221_153507.jpg
post #50 of 64
Thread Starter 
few more teasers...


IMG_20160222_071803.jpg

fill tonight and a ton of cable management to go
Edited by orbitalwalsh - 2/22/16 at 2:42am
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Build Logs
Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Build Logs › G1 4.6 Twin Turbo -Completed