post #1 of 1
Thread Starter 
Hmm. I was wondering if I didn't set my voltages too high. I have vcore 1.435 and vtt 1300. Should I change it?

PC specs:
i5 750 4,0GHz
Scythe Mugen II Rev.B
G.Skill 4GB (2x2GB) DDR3 1600MHz CL9 RL
Gigabyte P55-UD3
Asus Radeon R7 250X 1GB DDR5
OCZ 550W

BIOS settings

I was trying with vcore 1.4 but there was an error after ~17 minutes. After this I was testing 3,8GHz with vcore 1.33125 but It failed after 45 minutes so now I am testing vcore 1.35 with the same settings as at the pictures above.


2 hours in Prime95 without errors. 10 minutes in Linx without errors.
Edited by Nerish - 1/21/16 at 2:15am