Yeah I could try to wrap around a lot of electrical tape until it's so large on the inside that it can't fit outside the exit hole
Originally Posted by CeeSA
hmm, I never face such kind of problem. I always put as many as necessary cable and fix it somehow. Sometimes with the heatshrink, sometimes with the pcb screwed to the shell, or a screw holds the cable... I have no G303, but I have a G302 w/o any problem.
I'm not really sure what would fix it
Like in this video: https://www.youtube.com/watch?v=VP8mUAnLW7s
You can see the sleeve seems to fit perfectly fine - at no point is there any spill. If I just begin using the mouse the extra cable will just begin to push out. I'll try and get some screenshots when I open it up again later if you want - but even with both heat shrinks I still ran into the issue :PP I probably should have had you purchase the mouse and install it instead of try to do it myself - since you have the extra tools to make changes to the wires and what not
By the way does anyone know why they don't use these type of sleeves on regular gaming mice? Are they too fragile for careless gamers?