Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Case Mods › Case Mod Work Logs › Worklog: JP[μ]
New Posts  All Forums:Forum Nav:

Worklog: JP[μ]

post #1 of 72
Thread Starter 
Hi!!!

After looking for a new case with a lot of frustate ideas, I go to make and build my case.

I like some cases but all have some problem or don't like some point. Looking in Google I look EK Vulture, and I decided built case like this with my modifications.

Now I'm drawing in CAD program...

First I put components with my taste.

Option A









Option B







Problems...



Ram waterblock do interference with push-pull option...

I decide built Option A and I started yerteday to draw some sketches for frontal case...


Now, some 3D pieces modelings with frontal option decided.

Front cover (Acetal 7 and 10 mm with frost white logo):


Back plate cover (aluminium 2 or 3 mm):


And last, sktech for mount:

Tomorrow I will draw back case.

Kind regards...
post #2 of 72
Thread Starter 
I'm still working on parts , settings , etc ... it is no small feat and design all the pieces fit , but above all, make sure everything is fine, since once made ​​the piece can not go back.

In another topic. As you know I'll put the inverted plate , that is, rotated 180 degrees, my question is related to the block RL . In theory having an input and an output by default and a position on the motherboard , either . So far so perfect, but in this case the plate is rotated , if the block is placed in normal position ( as a plaque in his normal position and not rotated ) , I'll have some cooling problem ?. So you understand , well , block 180 turned over the plate, as if the block put it upside down on a plate normally installed.

Regards
post #3 of 72
Thread Starter 
Good evening or good morning could say almost ...

Now I have almost finished 3D, missing lids and details of grommet and rear fan ...

Tomorrow I hope to have it finished and send it to the budget ...
post #4 of 72
Thread Starter 
3D model finished...









Regards
post #5 of 72
I do like that case. Also enjoy the creative use of micro.
post #6 of 72
Thread Starter 
Hi friends

Today I received somes budgets.... only letters and front acetal between 300-400€.... without aluminium...

Perhap I bought case to do my project with some modifications. This weekend I will have all:

Case...

GPU...

Waterblock...

See you soon...
post #7 of 72
Thread Starter 
Hi!!!

New component arrived!!!

DbLzkZC.png

OMG!!!! Waterblock is a lot of bigger!!! FANTASTIC!!!

zYlLBP4.png

Us67vbk.png

LOL!!! This is the bigger GPU than I look at the moment...

cC0QE5y.png

98nxok6.png

6tMmuSb.png

And case, pretty, pretty, pretty...

B1BBswo.png

Omwun72.png

jSBWC3o.png

zdYLLBw.png

After I presented GPU to take dimensions...

gndHbfi.png

I have free 103mm fron GPU to plate to install reservoir with 60mm diameter and 45mm thick rad... What will happen?...

eNQtg9z.png

My idea is don't moddify case except do better air cooling or extra personalized panels

Regards!!!
post #8 of 72
Thread Starter 
Good night or maybe good morning too

After intense night...
g4C5sMd.jpg

4HTqW55.jpg

And the last, after UPDATE to last BIOS (0502) and I overclock micro to 4250MHZ with the options in AUTO... After install W10, drivers and...
a8Zl2PZ.jpg

Now I go to sleep some hours and after go to work... Hard day and a lot of cofees...

Regards!!!!
post #9 of 72
Thread Starter 
Hi friends!!!

Before I give new developments I have to thank the effort, patience and support they have given me from
logo_coolmod.png

On the other hand, more packages arrived yesterday and today another two. With this, I can really having almost everything to present and organize the space ... Start!!!.

From Amazon, the tool to bend the tube ...
F2tp53X.png

And from E22, samples of sleeve ...
Fg0PKhZ.png

Y5o7GxQ.png

Since Highflow.nl, a regular store my purchases and which has on occasion sponsor, some samples of sleeve, a top Koolance COV-RP450 (Rev 2.1) and the reservoir body diameter 60mm and 200mm high ...
k4EkbIJ.png

And they rolled them together are so, I love ...
BPKAARh.png

Go to the Top and reservoir...
RQ7e4z9.png

vdg6MgE.png

5VBScpl.png

Ppo0VPG.png

60ZvXaG.png

And weekend near...
post #10 of 72
Thread Starter 
Futuremark...(Enlace a los resultados)
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Case Mod Work Logs
Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Case Mods › Case Mod Work Logs › Worklog: JP[μ]