I have been purchasing my watercooling needs from performance-pcs who has been great and offer some awesome products.
One of my main purchases is 6 liters of Mayhems Pastel Red. So far I have used 5 of them... The first First I made a mistake and had to drain the system. The Second I cleaned the system and rinsed it with DI Water 8 times before adding the Pastel Red. It turned into a mess... The fluid turned a clear red with the particles all gathered in the tubes, CPU block, GPU block and the Rad. I had to take my whole system apart to clean each piece and get the particles removed. I used a mixture of vinegar and water. This worked very well and I reassembled my system then flushed it with DI Water 8 times. Wanted to make sure all the particles and dye was out. It took two days before particle separation occurred. I ordered the Mayhem Basic Cleaning system before doing anything else. I didn't need the Pro remover since the system is brand new. So I disassembled the entire system again and cleaned everything. Followed the instructions on Meyhems insert. Flushed the system with DI water 4 times... Added the Mayhem cleaning system let it run for 24 hours and followed by 4 flushings with DI Water. Added the Pastel Red and whole crap it happend again!!!! Clear Red with particles stuck in all the tubes, GPU, CPU and Rad.
So my real question is what the hell? What if anything am I doing wrong. I have sent multiple emails to Mayhem with no reply. I heard some horror stories about their Customer Service and finding it may be coming true.
I hope Mayhem will respond with resolution or send me some replacement coolent with a resolution or you guys can help!!
Edited by Flyguy0 - 2/7/16 at 7:34pm