Overclock.net › Forums › Intel › Intel CPUs › Hard time getting Q8400 to 3.6 GHZ
New Posts  All Forums:Forum Nav:

Hard time getting Q8400 to 3.6 GHZ

post #1 of 6
Thread Starter 
Currently running it at 3.2 GHZ with 400 FSB 8 Multiplier and the voltages for the northbridge, FSB and cpu have been raised a bit. I turned it up to 3.6 GHz raised the voltage to 1.3625 and FSB to 1.275 and NB to 1.3 volts. I would try to play black ops 3 and while loading it just kept bluescreening to something along the lines of WHEA_UNCORRECTABLE_ERROR or something like that. I have read that people can get these up to 4GHz no problem. Using an Intel DX38BT and I have an EVO 212 with temps in the mid 30s at idle at 3.6GHz just cant do anything.
post #2 of 6

You are limited by the motherboard and the CPU. You might also be limited by your power supply. If the PSU is a low quality PSU, then it could be delivering unstable and inaccurate power (which can only be seen with proper testing equipment) which can make overclocking become very difficult.

It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #3 of 6
Thread Starter 
I'm using a relatively new 850 watt corsair.
post #4 of 6
My money is on the motherboard being your limiting factor on this one. My old Q6600 peaked at about 3.4-3.5 with my old p965 board but once I got the ep45-ud3p then my cpu became my limit at 3.8 or so.
 
Play Server
(10 items)
 
NAS
(14 items)
 
CPUCPUMotherboardRAM
Intel Xeon L5640 Intel Xeon L5640 Dell R710 Mobo Hynix 144GB DDR3 ECC PC3L-10600R 
Hard DrivePowerCaseOther
Intel X25-M G2 80GB Redundant 840W PSU Dell 710 2.5" - Google Search Appliance Dell Perc H700 Raid Controller 
OtherOther
Dell iDRAC6 Enterprise Mellanox Connectx-2 10Gb SFP+ NIC 
CPUCPUMotherboardRAM
Intel Xeon E5-2670 v1 Intel Xeon E5-2670 v1 SuperMicro X9DRL-iF 64GB Kingston ECC (kvr16r11d4/16HA) 
Hard DriveHard DriveHard DriveCooling
12x 4TB HGST 5K4000 SanDisk SSD 960GB (cache) 6x 8TB WD Red Scythe AP-29 
CoolingOSPowerCase
2x Noctua U9DXi4 FreeNAS Corsair AX750 Norco RPC-4224 
OtherOther
3x LSI 9211-8i (HBA) Mellanox Connectx-2 10Gb NIC 
  hide details  
Reply
 
Play Server
(10 items)
 
NAS
(14 items)
 
CPUCPUMotherboardRAM
Intel Xeon L5640 Intel Xeon L5640 Dell R710 Mobo Hynix 144GB DDR3 ECC PC3L-10600R 
Hard DrivePowerCaseOther
Intel X25-M G2 80GB Redundant 840W PSU Dell 710 2.5" - Google Search Appliance Dell Perc H700 Raid Controller 
OtherOther
Dell iDRAC6 Enterprise Mellanox Connectx-2 10Gb SFP+ NIC 
CPUCPUMotherboardRAM
Intel Xeon E5-2670 v1 Intel Xeon E5-2670 v1 SuperMicro X9DRL-iF 64GB Kingston ECC (kvr16r11d4/16HA) 
Hard DriveHard DriveHard DriveCooling
12x 4TB HGST 5K4000 SanDisk SSD 960GB (cache) 6x 8TB WD Red Scythe AP-29 
CoolingOSPowerCase
2x Noctua U9DXi4 FreeNAS Corsair AX750 Norco RPC-4224 
OtherOther
3x LSI 9211-8i (HBA) Mellanox Connectx-2 10Gb NIC 
  hide details  
Reply
post #5 of 6
Thread Starter 
I am starting to think that as well although I was under the impression that with the newest bios the dx38bt was actually a pretty decent one. Maybe it is. At 3.4 ghz it seemed to be ok and maybe up from 2.66 that's considered a decent over clock. Buying a new computer soon just trying to see how far to take this one. It's bottle necking my current setup so bad with the gtx 590 hitting 40% usage in games while dropping frames and 100% cpu usage or high 80s anyway.
post #6 of 6

The X38 chipset was never all that desirable for overclocking though, and then you also have the fact that Intel's motherboards were also never really all that desirable for overclocking. Well, they never are.

It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Hard time getting Q8400 to 3.6 GHZ