Overclock.net › Forums › Cooling › Water Cooling › First time liquid cooling questions
New Posts  All Forums:Forum Nav:

First time liquid cooling questions - Page 2

post #11 of 12
^dat delta T doe

I used to hate the fan noise too, until I retrieved my pair of QC15s from my folks' place. Now with active noise cancellation, I barely hear a thing even when running all 19 fans (15 rad + 4 case) at full tilt. Best part? 4.5C delta T. biggrin.gif

And I know I'm still leaving a lot of performance on the table since I have very mediocre Corsair SP LED fans on my 420 and 360. Gonna replace the SP140s with Noctua iPPC 2000 rpm fans which should hopefully drive down delta T by another degree.
Quote:
Originally Posted by Tekgnome View Post

pump>Res#1>Gpu>cpu>ram>rad1>rad2>rad3>res#2>pump



Black is to the pump Red is from the pump



Pump>Res #1>GPU>Rad#1>Cpu>Ram >Res#2 >Rad#2 >Rad#3 >pump

Dual pumps will have to wait a bit as I will have to order another pump

Rad heat dissipation


Loop order doesn't matter, go with whichever has the shortest tubing runs between components.
post #12 of 12
Thread Starter 



Almost finished, I added a fill tube to the second res. It tucks back behind it out of sight and out of mind biggrin.gif

Thank you guys for the help thumb.gif
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › First time liquid cooling questions