Yes, that range of hex values is register and data value. As said before (see quote below) AD0E is the data value for register which you need to modify to change HBM voltage.past quote with info (Click to show)
Originally Posted by gupsterg @Ne01 OnnA
Every ROM in that pack offset location AD0E
is the data value for HBM voltage offset. So you make the 00h as you require, 01h = +6.25mV , 02h = +12.5mV and so on.
8E 00 00
00 is +/- 0mV , to have +25mV it will be 8E 00 04
After flashing you must power down card so IR3567B is reinitialised with bios data (instructions already in post 1019).
I have marked hex value in red in the screenshot you uploaded.Screenshot (Click to show)
Originally Posted by xkm1948
Did you disable secure boot?
The Nitro ROM in post 1019 or ROM packs in OP do not
have the Lordkag UEFI/GOP
, ROMs in post 1019 and modified ROMs in OP are all Non UEFI
the Fury X & Nano 107 ROM attached to post 1074
have the Lordkag UEFI/GOP, these ROMs have no other modifications over stock
(ie HBM voltage register, etc).
So you now have custom ROM with Lordkag UEFI/GOP working on your system, with Secure boot = Off, CSM = Off, Fast boot = On, so Windows 10 is in UEFI bios mode?Edited by gupsterg - 8/8/16 at 1:55pm