Done Filling The Loop, Now Bleed Testing
FINALLY it was time to fill the loop with the beautiful Mayhems Pastel Blue, and it looks amazing! Really spot on color match with the sky blue acrylic parts!
Before i filled the loop, i obviously did a leak test and cleaning of the parts with distilled water, and found a few smaller leaks, that had to be fixed.
But once that was taken care off, the mayhems blue filled up the loop and res block of the Blue Morpho, and result looks breathtaking! <3
So lean back, scroll through these images and enjoy! .. Final images will come very soon, just have to do some minor adjustments before it's ready.
Need to figure out if i should bend some of the remaining white acrylic, and do some smexy cover for the I/O in the top,
and also still need to get the white acrylic cover in the bottom finished, and glue the small butterflies in place, for a final touch.. Also last but not least, tighten those cables up again so please my OCD..
Enjoy!! Thanks so much for the support both from all you guys in the forum and my facebookpage "Beckmodz - liquid Designs" who has been following this project!<3