Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Build Logs › [Build log] Custom Desk PC/ PC in Desk (Building Stage)
New Posts  All Forums:Forum Nav:

[Build log] Custom Desk PC/ PC in Desk (Building Stage) - Page 3

post #21 of 197
Thread Starter 
Yes Please! that would be great biggrin.gif (970)
post #22 of 197
The 970 sits 11.43cm tall when plugged into the pcie slot. Buy you'll need to give yourself a generous 3+cm just for cable clearance. My box inside dimensions are a little over 17cm, and that's plenty of space for me.

Physical card dimensions are; 23cm long, 9.5cm wide(does not include pcue plug, Just physical card dimensions) , and 3.8cm thick (includes back plate)
post #23 of 197
Thread Starter 
Thank you very much!! You've saved me sooo much trouble!!!
post #24 of 197
Thread Starter 
Update*working on 3d model of what the desk will look like,getting everything to scale is a hindrance...
post #25 of 197
I can't tell you how many sites and forums I've been over trying to find dimensions like that lol. Glad I could help.
post #26 of 197
Thread Starter 




After an long hour of trying to use the software this is what i was able to make xD
NewWinRARZIParchive2.zip 3270k .zip file
post #27 of 197
Thread Starter 
I missed what you said about glass and acrylic but yeah glass would be better but I don't know any cheap glass cutter near me,I looked online and found a A3 size sheet of clear glass.
I only plan on havig the motherboard section visible btw
post #28 of 197
Thread Starter 
***NOTE*** IGNORE the height and dimensions, this was my first shot at using the software I just want to show a quick model of the layout: D
post #29 of 197
Thread Starter 
***Update*** if all goes will I should have the wood in about 2 week's.... Yeah it's a while but gives me enough time to get ALL measurements perfect!
post #30 of 197
Thread Starter 
Update** I have finalised my cut list and got all the measurements for the desk (minus legs) done! The length of 1100mm may Change to 1200 xD ignore the monitor rest that's a idea I have but may not follow though with it.As for the legs it will most likely be adjustable legs off Amazon biggrin.gif but I won't abandon the drawer idea!
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Build Logs
Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Build Logs › [Build log] Custom Desk PC/ PC in Desk (Building Stage)